Grade: 100% PET Color ratio: Clear 100% individually & Green 100% Appearance: Bottles Impurity : No Caps, rings, or labels PVC : Less than 0.01% Water Content : Less than 0.01% moisture Packing; Pressed in Bales. Baled and Loaded in 40' HC! 115cm X 75Cm X115 cm Commodity: PET Bottle.
low oxygen Selenium Granules
Size: 2-6mm.3-5mm,1-10mm or as required
Molecular Formula - Se
Molecular Weight - 78.96
Melting Point - 217 C
Boiling Point - 684.9 + 1.0 C
Relative Density - 4.81 g /cm3
Purity - 99.99%
Appeaance - Black
4.Excellent Anti-corrosive And Excellent Weather Resistance.
PVC roof tile can long resist acid, alkali, salt and other corrosive chemicals. It suitable for using in corrosive workshop, acid rain-prone area and coastal area.
5.Good Fire Resistance With Excellent Insulation And Excellent Waterproof Performance.
Belonging flame retardant material, with fire resistance tested by national authoritative departments. The roofing sheet selects highly weather-resistant resin, which is dense and
absorbing no water, with no pore penetration problem.
Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C
Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %
Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %
Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %
Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %
Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C
For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C
For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Tests Value Unit
Melt Flow Rate (MFR) 3.2 g/10min
Density 0.939 g/cm3
Melting Point 127 C
Tensile Yield Strength 21 Mpa
Tensile Strength at Break 28 Mpa
Elongation at Break 1,100 %
Flexural Modulus 750 Mpa
Brittle Temperature <-60 C
Tests Value Unit
Melt Flow Rate (MFR) 20 g/10min
Density 0.924 g/cm3
Tensile Strength MD12 Mpa
TD 10
Elongation at Yield 13 %
Elongation at Break 200 %
Dark Drop Impact 105 g
Brittle Temperature(F 50) -70 C
Vicat Softening Point 90 C
Tests Value Unit
Melt Flow Rate (MFR) 20 g/10min
Density 0.924 g/cm3
Tensile Strength MD12 Mpa
TD 10
Elongation at Yield 13 %
Elongation at Break 200 %
Dark Drop Impact 105 g
Brittle Temperature(F 50) -70 C
Vicat Softening Point 90 C
3/4" PVC sheets in a 4x8-foot size are not commonly manufactured or available in the same way as traditional plywood or other sheet goods. PVC (polyvinyl chloride) is commonly used in construction for pipes, fittings, and various other applications, but sheets of such dimensions and thickness are not as standard as they are for materials like plywood, MDF, or particleboard.
XPS (Extruded Polystyrene) foam insulation boards are commonly available in 4x8-foot sheets. These sheets are used for various insulation applications in construction, such as insulating walls, roofs, and floors. XPS insulation is known for its closed-cell structure, which provides good thermal resistance and moisture resistance.
4737 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
