European Industrial And Automotive Suppliers and Manufacturers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

Bacoban DL Alcohol-free disinfection and cleaning of medical fittings and equipment and other surfaces (in accordance with Directive 93/42/EEC: MDD). The product conforms to British Standards under ISO standards DIN EN ISO 13485:2010; DIN EN ISO 9001:2008; DIN EN ISO 10993-1; DIN EN ISO 14971:2007; and EN 14885. Bacoban is a disinfectant product produced in Germany by Ropimex R Opel GmbH. Its certifications are under the Disinfectants Commission in the Association for Applied Hygiene (VAH) in collaboration with the Scientific Societies and Professional Associations DGHM, DGKH, GHUP, BVÃ?GD and BDH tested according to the DGHM Standard Methods for Testing Chemical Disinfection Processes and deemed to be effective for prophylactic disinfection and hygienic handwash. Does not contain Aldehyde or Phenol. Microbiological effectiveness Bacoban DL is effective against: bacteria, fungi, viruses (hepatitis B and C, HIV, influenza including H5N1and H1N1, Rotaviruses and adenoviruses), and as listed on the page 'Infections that Bacoban kills'

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

Calcium hypochlorite is a chemical compound with the formula Ca(ClO)2, commonly used as a powerful disinfectant and sanitizer. It is often found in the form of white granules or tablets and is a key ingredient in various water treatment processes, including the purification of swimming pool water, drinking water, and wastewater. Calcium hypochlorite releases chlorine when dissolved in water, which effectively kills bacteria, viruses, and algae, making it an essential tool for maintaining water quality and safety. Additionally, it is employed in sanitation and cleaning applications, particularly in industries like healthcare, agriculture, and food processing, where its strong oxidizing properties help control and prevent the spread of infections and contaminants. Its role in ensuring clean and safe water supplies and hygienic environments makes calcium hypochlorite a critical chemical compound for public health and sanitation.

Oxalic acid is a naturally occurring organic compound with the chemical formula H2C2O4. It can be found in various plant sources, such as rhubarb, spinach, and certain nuts

Ethylene is a colorless and flammable gas with the chemical formula C2H4, representing one of the simplest hydrocarbon compounds with a double bond between carbon atoms. It is a natural plant hormone responsible for regulating various growth and developmental processes in plants, including ripening and flowering. Ethylene has significant industrial importance, as it is widely used in the production of plastics, particularly polyethylene, which is one of the most commonly used plastics worldwide. It also finds application in the chemical industry for the synthesis of various organic compounds. Ethylene's dual role in plant biology and industrial chemistry highlights its importance in both the natural world and human technology.

Cosmetic chemicals refer to a diverse group of chemical compounds used in the formulation of cosmetics and personal care products. These chemicals serve various functions, including enhancing product stability, texture, and shelf life, as well as providing desired properties such as moisturization, UV protection, and color. Common cosmetic chemicals include emollients (e.g., oils and fatty acids), surfactants (e.g., detergents and foaming agents), preservatives, fragrances, and pigments. They are carefully selected and incorporated into cosmetic formulations to create products that cleanse, moisturize, beautify, and protect the skin, hair, and nails, catering to the wide range of consumer needs and preferences in the beauty and personal care industry.

Formic acid, with the chemical formula HCOOH, is the simplest carboxylic acid and a colorless, pungent liquid with a sharp odor. It is naturally found in the venom of certain ants and serves as a key ingredient in stinging nettle plants. Formic acid is widely used in various industrial applications, including as a preservative and antibacterial agent in livestock feed, a coagulant in rubber production, and a powerful descaling agent for cleaning metal surfaces. It also plays a role in textile and leather processing, and as a basic building block in the synthesis of various organic chemicals. Its versatility and reactivity make formic acid a valuable compound with a range of practical uses in different industries.