Asuring via digital Gearcase. Such microprocessor control is designed to optimize the Charging cycles for any type of battery. • 230v coil three-pole contactor. • d.C. Fuse on rectifier output. • delta-star stray flux three-phase power transformer class h; Impregnated in autoclave with ecological epoxy resins, with Thermocouples for disconnection due to maximum temperature. • three-phase rectifier bridge with silicon diodes, natural cooling, with
Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
With decreasing Current (wa characteristic): 9÷11 h charging time, transformer thermal protection, Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked, Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen Printing, mains input and d.C. Output polarized cables, complete with mains And battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of the final charge at 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging Time (equalization charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from charge end, duration Of equalized charging phase: each hour 5’ (repeated for 48 hours), Calculation to determine the size of suitable battery charge: 16a for Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Switching technology with microcontroller digital control. They Are flexible and reliable devices. The high efficiency of the battery Chargers assures a remarkable energy saving optimizing the Economic benefits and permitting to amortize the investment for The selection of high frequency in a short time. They are suitable for the recharge of all kind of batteries (leadacid Gel, sealed, agm batteries, etc…) and allow selecting a specific Charge curve or configuring easily a suitable curve for the type of Battery. They are characterized by a negligible residual output ripple. The battery chargers integrate the input and output protections And are equipped with an over-temperature. They have a wholly programmable control unit, easy-to-use thanks To the user-friendly graphic interface displaying all the charge Parameters, the alarms, the data plate and all general information Concerning the device. These kind of battery chargers are equipped With a monochromatic graphic lcd display/led. Technical characteristics: - input voltage: 230 vca ± 10%, mono-phase - input frequency: 50 – 60 hz - efficiency: ~ 90% - operating temperature: – 20 to + 45 °c - current drawn by the battery: 0 a, if network electrically Bonded - protection against output short-circuit: yes, fuse - protection against polarity reversal: yes, fuse - thermal protection semi-conductors: yes - input protection: yes, fuses and varistors - charge curve: programming and settings at Will - default iu ia - displaying and messages: monochromatic 2x20 lcd Display - led - audible alarm device: yes - state charge indicator: yes multicolours
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades
Hydraulic turbines.
Steam turbines.
Gas turbines.
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets. More information on requests, for spam protection please introduce yourself properly. Main data of one mill: Manufacture’s type: NTK 130F/LM Year of manufacture 1988 Total operating hours: approx. 75000 Rated capacity, max: 145 kW Number of blades: 3 pcs Rotor diameter: 22 m Rotor speed: 44.5 rpm Cut-in wind speed: 4.0 m/sec Cut-out wind speed: 53 m/sec (120 mph) Hub height: 26 m Generator: ASEA 145 kW / 1500 rpm / 50 Hz Blade type: LM 9.7 m H/H/T diam. 21 m Gear box type: Lohman & Stolterfort GPC 145 Clutch type: Lohr & Brokamp Universal Joint No 105 Total weight: 15200 kg.
1MW String Inverters/
1MW String Inverters. Crate.
EKAÆs Broadband Network UPS model FR-1000 replaces outside plant standby power supplies in CATV networks, providing true UPS performance in a high efficiency package. The power module will retrofit most standby enclosures enabling any system to upgrade easily. The FR-1000 architecture incorporates an inherent ôsoft start" feature eliminating any need for high-inrush circuit breakers and nuisance breaker tripping.FR-1000 accepts a wide range of input frequencies and voltages. Consequently, generator compatibility is maximized. Bi-directional Power Sharing (BPS) allows continuous power flow from utility or the battery string to smoothly support load requirements without the need for mechanical transfer, tap switches or line-detection circuits. 33 kg per piece.
By respond By respond
10-300 kVA 3 Phase Input - 3 Faz Output Online UPS. Atlas 3000 Series Online UPSs protect thr critical loads against utility failures and irregular voltage cases where you use three phase electricity for the loads. They are producing pure sinewave output via microprocessor controller, manufactured with the state of the art PWM and IGBT technology. Galvanic isolation transformer, parallel operation, communication port are available in the standard models. Industrial manufacturing machines, hospital and monitoring equipments, heavy, medical, communication and laboratory equipments,etc. are the main fields of use with a proved reliable high technology.
6-30 kVA 3 Phase Input - 1 Faz Output Online UPS. Atlas 200 Series Online UPSs protect monophase critical loads against utility failures and irregular voltage cases where you have three phase electricity. They are producing pure sinewave output via microprocessor controlled, manufactured with the state of the art PWM and IGBT technology. Galvanic isolation transformer, parallel operability, communication ports are available in the standard models. Industrial automation, integrated facilities, building security automation, medical, communication and laboratory equipments, etc. are the main fields of use with a proved reliable high technology.
1-15 kVA 1 Phase Input - Output Online UPS. Atlas 100 Series Online UPSs protect monophase critical loads against utility failures and irregular voltage cases. They are producing pure sinewave output via microprocessor controlled, manufactured with the state of the art PWM and IGBT technology. Galvanic isolation transformer, parallel operability, communication port are available. IT applications, small offices, service providers, communication networks, control equipments, automation systems etc. are the main fields of use with a proved reliable high technology.
1-10 kVA 1 Phase Input - Output Online UPS. ESIS EGE series, produced with PWM and IGBT technology, contains sinusoidal wave generating, developed communication options equipped, 1 phase input 1 phase output on-line UPS. ESIS EGE Series manufactured in different power ranges, are used to supply vital important equipments such as medical analysis equipments, operating rooms in hospitals, ultrasound equipments, tomography, MR imaging systems, security systems, all kinds of automation systems, computer networks, communication systems. Thanks to higher protection providing technology, EGE Series protect them from problems of utility failures and irregular voltage.
The ELIT series inverters produced in ESIS facilities with the latest technology, are power supplies providing the same voltage. The ELIT series inverters produced in ESIS facilities with the latest technology, are power supplies providing the same voltage form as the utility. They have the advanced technology of DSPs (Digital Signal Processors) to convert 12V, 24V, 48V, 60V DC voltages into 220 Vac, 50 Hz. These inverters can be utilized for the supplying of all electrical equipments without any trouble because of the pure sine wave at the output. Since the energy source is a DC voltage when there is no utility source, they can provide a long-life energy in land, marine vehicles, industrial institutions, railways, military applications, telecommunication switchboards, energy production centres. Thanks to the DSP technology, frequencies are available to be formed sensitively, with a little change in software, they can be reassigned as 60Hz, 83Hz and 400Hz. These inverters are available for all kinds of applications due to the wide input voltages, standard power options between 1000VA to 7500 VA, silent performance, high efficiency, and pure sine wave. The inverter types in the table are instantly delivered from our storage, and the other models are manufactured in a short time under the ISO9001:2000 quality management system.
Worldwide approaved by all the major gas turbine manufacturers 20/200/1000 lts.
Polo DC Inverter 12,000 Btu, R410A heating capacity 5, 6 kw cop 3, 72 cooling capacity 5,3 kW EER 3,56 ¦ 420 prices are EXW for 15 pcs or more. Installation kit ¦ 55 Containing the following: a. 5 meters Connection Pipe: one pair, thickness 0,81 mm, dimension + & 3/8 or + & +. b. Bracket in galvanised steel EXW ¦ 15 c. Wall-Tube with Tube Cover for installation: 1 set d. Drainage Hose: 1pc e. Binding Tape: 1pc f. Warm-Insulated Tube: 1pc g. Vibration restrains: 4pcs h. Power Cable (5x1.5 sq mm): 1pc
