Construction PU Sealant is a one-component, low-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. Possesses permanent elasticity. 25 % movement capability. No surface tackiness after full cure. Do not pick up dirt. No shrinkage. Cures bubble-free. Enhanced storage stability. No sagging Thixotropic. Can be applied with hand gun and tooled easily. Paintable.
Compose A Joint Usg Boral - Ready Mix Joint Compound All Purpose Joint Compound Is Usually Sold Pre-mixed. This Product Is Used For Almost Every Drywall Installation And Repair. Joint Compound Is Used To Finish Drywall Joints And Corners. It Provides Faster And Superior Performance In Joint Closure. It Is Also Useful For Repairing Cracks And Holes In Existing Plasterboard And Plaster Surfaces. You Can Save Time By Using Joint Compound Cause It Does Not Need To Any Extra Process. It Is Ready To Use. It Takes 6 To 12 Hours To Dry, Depending On The Humidity And Temperature. Turkey Is One Of The World's Leading Country In The Gypsum Resources And Production Of Gypsum. As Board And Wall Company; We Export Highest Quality Of Gypsum Powder And Joint Compound All Around The World. Megaturk Co. Ltd, Istanbul - Turkey
Facade with a clean design, but a relatively more expensive performance due to the specific requirements for the sealing gasket and weather conditions during installation Possibility for glazing up to 64mm Extremely good thermal performance uw> = 0.6 w / m2k
A new generation of facades corresponding to different types of construction and architectural solutions Possibility of glazing up to 56mm Extremely good thermal performance uw> = 0.6 w / m2k Very good waterproofing and noise insulation characteristics
Contact sales department
Tile leveling wedges : 5mm/250pcs/047USD-EXW 10mm/250pcs/1,10USD-EXW Tile leveling wedges eco : 100pcs / 1,45USD-EXW Brand name : ORBOFIX Origin : Made in Turkey Payment : TT, LC %30 in front at purchase, %70 before loading Whole Sale Price Minimum Order Quantity : 3000
Plaster of Paris Production Averages TESTING PARAMETERS Water / Gypsum Ratio - 7 lt water 10kg powder Crystal Water - 5,22 Diameter - 193,61 Initial Setting time - 07:35 Final Setting time - 14:55 Flexural Strength (7 days) - 4,91 N/mm2 Compressive Strength (7 days) - 15,62 N/mm2 Dry Density - 680 g/L Seive Analysis 45 m - 17,12 100 m -1,64 160 m - 0,39 200 m - 0 400 m - 0
Material :plastic, concrete Round conductor/flat tape range mm 8-10 Height / lenght mm 105 Diameter mm 130 Weight kg 1 Others warranty: up to 5 years
It is a cement-based, one-component, ready-to-use plaster and repair mortar with special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In exterior plastering and exterior restoration works in buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick
- Cement-based, one-component, ready-to-use plaster and repair mortar containing special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In the interior plastering and interior restoration works in the buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
4-0mm powder size 6-0 Mass Patch Sand Size 8-5 mm and 11-7 mm Size 16-9 mm and 12-12 mm Size 17-35 mm and 40-23 mm
Pink Marble in Sheet QTY Per Container 20'' = 435 m2 Price/M2 - Eur 16,00
ANO-Step: The picture above is what we produce with dimensions width 155mm ,length 135 mm ,plug is 50mm and diameter is 25 mm . Product of origin : Greece Minimum order of steps are : 1500. And packaging is as request by customer .
Used to prevent water leaks and fill cracks, polyurethane based, water reacting, one component solvent free .Semi flexible injection with closed cell structure foams
Building materials, construction material.All the clearing and arrangements for shipping and conditions arranged by my client companies
General trading company from uk we sell: construction equipment construction materials shipping containers steel petroleum and oil barrels commodities such as aloe vera gel milk powders electronic goods, smart phone tv and displays safety equipment such as nitrile gloves and hand sanitizer.Import and export to and from uk
Liquid adblue, urea for agricultural, technical grade urea for adblue, anhydrous ammonia, base oils, lubricants, paraffin wax, labsa, rock phosphate, npk, ammonium nitrate, polypropylene, en590, jet a1, chemicals, construction materials.
Metal dept: copper, construction department : steel rebar, cement, concrete, food department: rice, sugar, saffron, asafoethida.
PE/PP Tarpaulin None welded width can reach 1.8-4.2 meters and welded width can reach 30 meters. Coating on one side or both sides. According to customers requirements, it is available to add UV inhibitors or fire retardant or others. Laminating all around and using pp rope to strengthen, with Al-eyelets or black corner