Door detector for lifts Infrared light curtain to protect lift passangers When doors are closing. High reliability product More than 10 years on the market. Several models are available. Exported to many countries Packed in tubes of 2.15m of diameter of 50mm
Elevator
Elevators
Elevators and escalators Sales, installation, maintenance and modernization diffrent type of elevatirs and escalators. (passenger, freight, residential, service, bed and observation). Standard of manufacturer company .
Service and goods lifts All sizes available to bespoke dims.
2 post Electro-Hydraulic lifter Capacity: 3000Kg Max.lifting high: 1800mm Min.high: 120mm Overall height: 2880mm Overall width: 3020mm Lifting time: 60S Falling time: 60S Motor: 2.2KW 380V 50Hz Net weight:700Kg Gross weight: 750Kg
4 post electro-hydraulic lifter Capacity: 3500kg Max.Lifting high: 1700mm Min high: 500mm Overall length: 4360mm Overall width: 2920mm Overall high: 2118mm Lifting time: 75s Falling time: 75s Motor: 2.2kw 380v 50hz Oil pressure: 20mpa Net weight: 1100kg
Electro-hydraulic scissors lifter Capacity: 3000kg Max.Lifting high: 1750mm Lifting time: 50s Falling time: 30s Power supply: 110/220v 1ph; 380v 3ph Motor power: 2.2kw Oil pressure: 16mpa Air pressure: 0.8mpa Noise:
Service lifts (service elevators) Product range Lifts for utilization in restaurants, hotels, hospitals and private homes. We offer 4 different types of service lifts for different applications: Parting doors at serving height (iso-a) Bi-parting doors at floor level (iso-c) Hinged doors at floor level (iso-d) Cabin with 2 separate compartments (iso-z)Our strengths In recent years we have become a market leader by focussing high-tech and on quality.Low costs Galvanized construction Short delivery and installation times Pre-assembled plug-in controllers Installation
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
Passenger lifts(Passenger elevetors) The lift is ideal for retrofit within existing buildings with min. Adjustment on site elf-supporting steel structure minimum headroom Pit 350 mm instead of 1300 mm Pre-installed cabin and drive unit Easy installation Controller with micro-processor plug-in system Complete drive unit in headroom (no separate machine room necessary) Iso-pm 225 Capacity: 3 persons (225 kg) The passenger lift iso-pm 225 has a fixed cabin floor of 0, 75 x 0, 97 m and a door height of 2, 00 m. Iso-pa 300 Capacity: 4 persons (300 kg) The passenger lift iso-pa 300 has a fixed cabin floor of 0, 965 x 0, 99 m and a door height of 2, 00 m. Technical information
Automatic lift Beside our standard service lifts we also offer semi-automatic or automatic Tote-Box-Systems. The basic system and components are similar to the per-assembled construction of our service lifts. The automatic lift includes vertical bi-painting doors with 24 V motor, to open and close the door automatically, independent of the cabin doors. In the car a driven belt device will draw into and eject from the cabin the tote boxes. In front of each landing is a load- and unload- roller conveyor to carry 2 or 3 boxes and code lines at each box for easy pre-setting. Structure self supporting and free standing steel structure made of cold rolled galvanised profiles, pre-mounted in 2 m - sections with trunking and t-guides Lift machine (made in Germany)on top of the shaft, with hardened twin groove sheave, speed 0,40 m sec. The machine is mounted on steel beams, having a high quality reduction gear, magnetic disc brake and hand wheel, protection class IP 54, power supply 400 V 50 Hz, three phase. Speed 0,8 - 1 m sec or frequency control upon request. Controller High security through transformer and 24 volt system, pluggable and pre-wired. SPS (computer programmable) control system compressed equipment in a lockable controller box. Each project will be prepared to the clients requirements. System Each landing door has its own 24 Volt motor to open and close the door automatically independent of the cabin door. In the car a driven belt device will draw into and eject from the cabin our standard tote boxes. In front of each landing is a load and unload roller conveyor to carry 2 resp. 3 boxes. There are photocells in the lift car to read the destination of the box. Our standard tote box is made of heavy duty polypropylene for smooth running, size 400 x 600 x 300 mm. Each box has a slider to set the festinated floor marking easily. The roller conveyors have PVC-rollers. The frame work is made of folded galvanised steel profiles in "office design". The photocells and switches are well protected in the frames. Operation mode Set the slider at the box for the designated floor and put the box on the upper roller conveyor. This conveyor has an automatic device to keep the first box away from the landing door and also to keep the second box away from the first. The computer will notify that there is a box waiting and will send the car to pick it up. The door opens automatically after arrival and the belt will draw the box into the car. Photocells read the destination. Door closes automatically and car delivers the box to the floor indicated on the slider. After opening the landing door, the belt ejects the box to the unloading conveyor. Complete automatic operation will be carried out without human assistance or recall. Options Capacity of 100 or 200 kg, Car and doors in stainless steel, Speed 0,8 m - 1,o - 3 m/sec, Travel up to 150 m
Passenger Lifts The lift is ideal for retrofit within existing buildings with min. adjustment on site self-supporting steel structure minimum headroom pit 350 mm instead of 1300 mm pre-installed cabin and drive unit easy installation controller with micro-processor plug-in system complete drive unit in headroom (no separate machine room necessary) Technical information The information given below lists main features of our passenger lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles with guides T 70 x 65 x 9 Buffer 80/80 Cabin Cant-off system made of galvanized steel, adjustable guides shoes on two sides + emergency guiding Compensation device on suspension chain floor PVC covered Cabin light (flush installation) - Cabin ventilation Cabin push button station - emergency call - emergency light - emergency telephone call pre-installed Governor operated safety, type tested Special cabin apron (registered design application) Hinged doors ISO-PM 225 manual operated hinged doors, made of primed painted steel, window in Aluminium frame incl. door frame, Call button with stainless steel cover type tested door lock with fail safety lock Door closer - installed covered Horizontal sliding doors ISO-PA 300 powered horizontal sliding doors made of primed painted steel incl. door frame, cover panel, Call button with stainless steel cover type tested door lock with fail safety lock Machine room door double hinged door galvanized with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 and factory-made oil-filling, double disc brake and hand wheel, 3 x 400 V 50 Hz. chain wheels for chains 5/8 x 3/8" Controller Microprocessor in controller cabinet Installation pre-installed and plug-in system Floor selector (impulse driven)
Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket
Service lifts Product Range Lifts for utilization in restaurants, hotels, hospitals and private homes. We offer 4 different types of service lifts for different applications: parting doors at serving height (ISO-A) Bi-parting doors at floor level (ISO-C) Hinged doors at floor level (ISO-D) Cabin with 2 separate compartments (ISO-Z) Our strengths In recent years we have become a market leader by focussing high-tech and on quality. low costs galvanized construction short delivery and installation times pre-assembled plug-in controllers Installation 90 % of our service lifts are made from pre-installed components. Therefore the installation times are reduced on site by 50 %. Thanks to a ingenious method of construction our service lifts can be used for almost any purpose and can be made according to your specification. Technical Information The information given below lists main features of our service lifts. As there are over 160 options available, please do not hesitate to contact us for further details. Structure Self supporting steel structure, made of cold rolled special profiles, fully galvanized, pre-assembled in 2 m sections including trunking.
BBE M517 CPU CONTROLLER Up to 32 floors in octoplex operation capability, Built in magnetek's elevator ac drive for super comfort ride at all speeds, Access Code VIP floors Programming, advanced statistics and troubleshooting 5.5kw 100x80x25
Emergency rescue device for elevators In case of power failure the device drives the car to the nearest stop taking into consideration the load inside the car the device can switch dirve frequency in order to avoid overload it can also detect the current to switch directions, and to save battery energy Equiped with dry maintenance free batteries and a switching mode power supply charger. 60x80x20
Retiring camp For opening the landing door.Operatable with 110 DC / 230 DC Plunger type Standard Lot Size 5 numbers Weight 50 Kgs per box Dimensions 30 inches * 17 inches * 9 inches
Explosion proof and permanent elevators.
Elevators Panoramic.
