AC motor 1.Haitec power transmission co. Ltd is the joint venture company between singapore and hk investers. High grade management and quality control system. 2.Housing material is high density aluminium alloy adc-12. 3.Gear profile type zk which efficiency up to 0.9. Other china made gear profile type is in za which efficiency up to 0.7 only. Hobbing tools for zk profile are much expensive more than 10 times than za. 4.Material of worm shaft is 40cr (astm 5140). Others makers are using 45# steel which quality is poor while using it as worm shaft. 5.Material of brass on worm wheel is zqsnd10-1 (din gb-cusn10/2.1051)(bs pb1) which other china makers are using zqsnd9-4 only. 6.Bearings from fag bearings china oem makers. 7.Synthetic lubrication oil of taxas brand. 8.100% running test before ex-factory. Thus, haitec worm gears have much high quality than other china mainland makers and the prices must higher than them. However, it is still much cheaper than european products.
Model: YHD-380 No load current: 0.48A Max No load speed (rpm):12700RPM±10% Rated load current (A):2.95A Max Rated load speed (rpm):10908 RPM±10% Rated torque:110 g-cm
1. durableâ andâ strongâ reinforcedâ nylonâ mountâ &â 304â stainlessâ steelâ components. 2. strongâ compositeâ fiberâ glassâ shaft, â underwaterâ depthâ adjustment. 3. aluminumâ head. 4. 6-inchâ telescopingâ & 120â° fold-able handleâ ass'y. 5. 90â°â twistâ tillerâ adjustmentâ withâ 10â grades. 6. 5â forwardâ speedsâ &â 3â reverseâ speedsâ control. 7. indicatorâ ofâ 10â ledsâ asâ powerâ reader, â batteryâ savingâ systemâ forâ moreâ runningâ time. 8. highâ temperatureâ resistanceâ bakeliteâ switch. 9. ulâ wireâ cablesâ toâ supportâ theâ bigâ current. 10. inputâ 12v(32/36/40/46/50/55/60lbs)â orâ 24v(86lbs). 11. weedlessâ macheteâ propeller:â 2-bladesâ forâ 32/36/40/46lbsâ andâ 3-bladesâ forâ 50/55/60/86lbs. 12. worksâ bothâ inâ freshwaterâ andâ saltwater. 13. oemâ andâ customizationâ available. 14. warranty:â 2â yearsâ &â 2%â freeâ spareâ partsâ areâ available. 15. ceâ certificate.
1. durableâ andâ strongâ reinforcedâ nylonâ mountâ &â 304â stainlessâ steelâ components. 2. strongâ compositeâ fiberâ glassâ shaft, â underwaterâ depthâ adjustment. 3. aluminumâ head. 4. 6-inchâ telescoping handleâ ass'y. 5. 90â°â twistâ tillerâ adjustmentâ withâ 10â grades. 6. 5â forwardâ speedsâ &â 3â reverseâ speedsâ control. 7. indicatorâ ofâ 10â ledsâ asâ powerâ reader, â batteryâ savingâ systemâ forâ moreâ runningâ time. 8. highâ temperatureâ resistanceâ bakeliteâ switch. 9. ulâ wireâ cablesâ toâ supportâ theâ bigâ current. 10. inputâ 12v(32/36/40/46/50/55/60lbs)â orâ 24v(86lbs). 11. weedlessâ macheteâ propeller:â 2-bladesâ forâ 32/36/40/46lbsâ andâ 3-bladesâ forâ 50/55/60/86lbs. 12. worksâ bothâ inâ freshwaterâ andâ saltwater. 13. oemâ andâ customizationâ available. 14. warranty:â twoâ yearsâ &â 2%â freeâ spareâ partsâ areâ available. 15. ceâ certificate.
1. durableâ andâ strongâ reinforcedâ nylonâ mountâ &â 304â stainlessâ steelâ components. 2. strongâ compositeâ fiberâ glassâ shaft, â underwaterâ depthâ adjustment. 3. aluminumâ head. 4. 6-inchâ telescoping handleâ assâ??y. 5. 90â°â twistâ tillerâ adjustmentâ withâ 10â grades. 6. 5â forwardâ speedsâ &â 3â reverseâ speedsâ control. 7. indicatorâ ofâ 10â ledsâ asâ powerâ reader, â batteryâ savingâ systemâ forâ moreâ runningâ time. 8. highâ temperatureâ resistanceâ bakeliteâ switch. 9. ulâ wireâ cablesâ toâ supportâ theâ bigâ current. 10. inputâ 12v(32/36/40/46/50/55/60lbs)â orâ 24v(86lbs). 11. weedlessâ macheteâ propeller:â 2-bladesâ forâ 32/36/40/46lbsâ andâ 3-bladesâ forâ 50/55/60/86lbs. 12. worksâ bothâ inâ freshwaterâ andâ saltwater. 13. oemâ andâ customizationâ available. 14. warranty:â 2â yearsâ &â 2%â freeâ spareâ partsâ areâ available. 15. ceâ certificate.
We are a manufacturer and can manufacture products according to our customer's design. Currently we are looking for qualified stocking distributors with competitive price and good discount in the world for mutually beneficial long-term relationship. We try our best to support our distributors and business partners to develop more market percentage. Please join us, let's create the glorious future together!
LAYER FPCB 4 layer Application MOTOR Thickness FPCB 0.1T / MULTY 0.3T L/S 50/50 Drill LASER DRILL 0.08mm ANNULAR RING 42.5 Inspection spec Zero defect SPECIAL item for controlling Outer layer [14 layers ANNULAR RING ]
Rated Torgue(Kgfcm) : 0.63~1.91 Size(mm): 60x60x51 60x60x61 60x60x71
Holding Torgue (Kgfcm): 11.5 ~ 22 Size (mm): 60x60x54 60x60x64 60x60x85
Holding Torgue (Kgfcm): 5.0 ~ 6.0 Size (mm): 56x56x51 56x56x56
Holding Torgue (Kgfcm): 1.6 ~ 3.2 Size (mm): 42x42x34 42x42x40 42x42x46
Sjr3-2000 series is the latest soft starter developed by our factory.It expands new function such as literal display, industrial communication and various protections based on the products of sjr2 series.This product will be the upgrading and replacement of sjr2 series eventually. It shares the same technical framework with sjr3-3000. The applicable standards:iec 60947-2-2:2002 Brand name:safesave Model number:sjr3-2000 r2 Output power:1 - 200kw Output type:triple Size:400*270*240mm Weight:20.5kg Input voltage:110v/120v/220v/230v Output voltage:0-380v Type:ac/ac inverters Output frequency:0~3200hz Output current:load Certification:ccc, ce, iso9001 Protective class:ip20 Warranty:1 year Packaging details: Standard export packing Delivery detail: Wthin 30 days
The 17hs series (42bygh) hybrid stepper motor can be used with dm420 drives Brand: act aincot Model: 17hs5604 Step angle: 1.8 degrees Body length: 48mm Current: 0.4 amperes Static torque: 0.4n.M Number of leads: 6 Weight: 0.36kg 1. We can produce the motor according to your request The 2. Products are changzhou aincot motor manufacturing co., 100% factory outlets 3., our products are free of tax. If you need to make an invoice, please contact the customer service staff before you buy 4., specific freight please consult customer service personnel, we will collect according to actual situation 5. Large quantities of prices, please contact the customer service staff directly 6., all products are through ce certification and rohs certification, can rest assured that the purchase, quality assurance
DM420 drive, and 42BYGH stepper motor with the use of Brand: ACT Product type: DM420 type DM420 type subdivision driver of two phase hybrid stepping motor drive, with 12 ~ 36V DC power supply, suitable for driving voltage of 24V ~ 36V, current is less than 2.0A diameter 42 ~ 57 mm two-phase hybrid step motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation a small, low speed operation is very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices. I. overview DM420 type subdivision two-phase hybrid stepper motor drive, with 12 ~ 36V DC power supply, suitable for driving voltage of 24V ~ 36V, current is less than 2.0A diameter 42 ~ 57 mm two-phase hybrid step motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices. 1 average current control, two phase sinusoidal current drive output 2 DC 12 ~ 36V power supply 3 opto isolated signal input / output 4, overvoltage, undervoltage, overcurrent, interphase short-circuit protection function 5, eight files subdivision and automatic half flow function 6, eight files output phase current setting 7 has the offline command input terminal 8 the torque of the motor is related to its speed, irrespective of the number of steps the motor has to rotate 9 high starting speed 10. high speed torque Input voltage DC 12 to 40V input The input current is less than 2 Amperes The output current is 0.44A to 2.83A Power dissipation: 40W The working temperature is -10 to 45 degrees; the storage temperature is between -40 and 70 centigrade Moisture can not dew or water Gases are prohibited from flammable gases and conductive dust Weight 70 grams
DM542 drive, and 57BYGH stepper motor with the use of Brand: ACT aincot Product type: DM542 type DM542 type subdivision driver of two phase hybrid stepping motor drive, with 18 ~ 50V DC power supply, suitable for driving voltage of 18V ~ 50V, a two-phase hybrid step current is less than 42~86 mm diameter 4.0A stepper motor. The current loop driver adopts AC servo drive subdivision control, torque ripple of motor is small, low speed operation is very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices. I. overview DM542 type subdivision two-phase hybrid stepper motor drive, with 18 ~ 50V DC power supply, suitable for driving voltage of 18V ~ 50V, a two-phase hybrid step current is less than 42~86 mm diameter 4.0A stepper motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation is small, low speed running smoothly and almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices. 1 average current control, two phase sinusoidal current drive output 2 DC 24 ~ 50V power supply 3 opto isolated signal input / output 4, overvoltage, undervoltage, overcurrent, interphase short-circuit protection function 5, fifteen files subdivision and automatic half flow function 6, eight files output phase current setting 7 has the offline command input terminal 8 the torque of the motor is related to its speed, irrespective of the number of steps the motor has to rotate 9 high starting speed 10. high speed torque Input voltage DC 18 to 50V input The input current is less than 4 Amperes The output current is 1.0A to 4.2 Power dissipation: 80W; internal insurance: 6 The working temperature is -10 to 45 degrees; the storage temperature is between -40 and 70 centigrade Moisture can not dew or water Gases are prohibited from flammable gases and conductive dust Weight 200 grams
Dm860 type subdivision two-phase hybrid stepper motor drive, with 24 ~ 80v dc power supply, suitable for driving voltage of 24v ~ 80v, current is less than 8.0a diameter 57 ~ 110 mm two-phase hybrid step motor. The current loop driver adopts ac servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, cnc machine tools, packaging machinery and other high requirements on the equipment. I. Overview Dm860 type subdivision two-phase hybrid stepper motor drive, with 24 ~ 80v dc power supply, suitable for driving voltage of 24v ~ 80v, current is less than 8.0a diameter 57 ~ 110 mm two-phase hybrid step motor. The current loop driver adopts ac servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, cnc machine tools, packaging machinery and other high requirements on the equipment. 1 average current control, two phase sinusoidal current drive output 2 dc 24 ~ 80v power supply 3 opto isolated signal input / output 4, overvoltage, undervoltage, over-current, overheating, interphase short-circuit protection 5, fourteen files subdivision and automatic half flow function 6, eight files output phase current setting 7 has an offline signal transmission terminal 8 high starting speed, high speed torque I. Electrical parameters Input voltage Dc 24 ~ 80v input Power dissipation: 80w; internal insurance: 10a Temperature The working temperature is -10 to 45 deg c; the storage temperature is between -40 and 70 deg c No dew, no water Flammable gas and conductive dust are prohibited Weightabout 500 grams
The 23hs series (57bygh) hybrid stepper motor can be used with dm542 drives Brand: act aincot Model: 23hs8430 Step angle: 1.8 degrees Body length: 76mm Current: 3 amperes Static torque: 1.9n.M Number of leads: 4 Weight: 1.05kg 1. We can produce the motor according to your request The 2. Products are changzhou aincot motor manufacturing co., 100% factory outlets 3., our products are free of tax. If you need to make an invoice, please contact the customer service staff before you buy 4., specific freight please consult customer service personnel, we will collect according to actual situation 5. Large quantities of prices, please contact the customer service staff directly 6., all products are through ce certification and rohs certification, can rest assured that the purchase, quality assurance
The 34hs series (86bygh) hybrid stepper motor can be used with dm542 drives Brand: act aincot Model: 34hs1456 Step angle: 1.8 degrees Body length: 113mm Current: 5.6 amperes Static torque: 8.4n.M Number of leads: 4 Weight: 3.8kg 1. We can produce the motor according to your request The 2. Products are changzhou aincot motor manufacturing co., 100% factory outlets 3., our products are free of tax. If you need to make an invoice, please contact the customer service staff before you buy 4., specific freight please consult customer service personnel, we will collect according to actual situation 5. Large quantities of prices, please contact the customer service staff directly 6., all products are through ce certification and rohs certification, can rest assured that the purchase, quality assurance
Thai motor parts and accessories.
Drum motor.
