Stainless steel pneumatic actuator Model: srt050, 063, 075, 088, 100, 125, 145, 160, 210 Pressure range: 0-1.0mpa Medium temperature: -20c~+180c Ambient temperature: -20c~+60c Actuator cylinder, cap, shaft, components: stainless steel 304 Type: double acting, spring return Torque: from 7.3n.M to 3730 at 5 bar air supply pressure Pc to foam box, foam box to carton box, then to plywood case
Electrical actuator (modulating type) Model: kst-02, 05, 10, 20, 40, 60, 100 Torque scope: 50-1000 n.M Working range: 0-360 Ambient temp.:-30c~+60c Cover:aluminum alloy Protection class:ip68 Voltage:24v ac, 24vdc, 110vac, 220vac, 380vac Type: on-off, regulating, passive contact Pc to foam box, foam box to carton box, then to plywood case
1the input signal: 4--20ma dc 2the input resistance: 250 ohm 3input passage: 14 basic error: 1%, 2.5% 5deviation: 1.5% 6deadline: 0.5%--3% continuously adjustable (according to the indication of system) 7damping characteristic: no-oscillating 8power supply: three-phase 380v50hz, single-phase 220v50hz for selected 9working conditions: temperature: integral-type -10-- +55, separate-type -25 -- +70 Humidity: 85%the surrounding air does not have the corrosive elements 10protection rank: it conforms to the iec145 ip65 standards. (excluding the separate-type gamx with waterproofing and dustproof functions fixed in rooms), bus type and intelligent type ip67. 11the cut-off signal protection: it can be divided into all-on, all-off and home position according to your instructions. Generally it is set into the home position when it is manufactured. Wooden case
Summary DKJ quarter-turn electric actuator and DKZ linear-turn electric actuator are the earliest and the only products in our country. The products pool the wisdom of all the experts in our country during the planned economy time. Our engineers devoted themselves to this project in the early period, made great contributions to push the DKJ and DKZ series to the market and laid the foundation of enterprise's professional development. It is used in large-scale state-owned enterprise with simple-structure and economical and practical merits in the early period. With the development of modern industrialization and computer management, we make two outstanding improvements compared with the previous DKJ, DKZ series nowadays 1.We have already produced the electric intelligent type product, outdoor type, anti-explosion type and other improved products which are directly controlled by computer. 2.The steering circuit is fixed into a small plastic casing (generally called module), forming the PNP type that is easy to maintain. It functions as the higher regulating precision and longer using life. Our actuators have the most standard outlook size, which have played a key role in reconstructing projects of many large-scale enterprises. Principle of work The DKJ, DKZ series electric actuator are the terminal control device of industrial process survey and the control system, changing the system¡¯s control signal into angular displacement, linear displacement of output axle, the position of valve and other regulating units. The main purpose is to enable the controlled medium to work well under the regulated system conditions. The electric actuator is divided into the proportion type and integral type according to the controlling type. The proportion actuator is made up of electric servo amplifier and integral type actuator that can compare systematic control signal with the feedback signal (closed-loop control) of output axis so as to change the travel route and has proportion relations with the output axis signal. The integral actuator consists of servo motor, reducer and position transmitter. Coordinating with motor operator, it can control valve or other regulating units from long distant. wooden case
Our company and tianjin university developed the electric actuator together, which fills the domestic gap. It was the fastest electric actuator in our country till now. The skj product series united with the butterfly valve form the electric valve with fast shutting off performance which is especially suitable for the work situation that needs urgently action. ¡¡¡¡the high speed series are widely used in the field of cement, the coal gas, agglutinates etc and was highly appraised by users. Wooden case
Motor: 12v / 24v dc permanent magnet motor Max. Push/pull: 750n (165lbs) Duty cycle: 2min. Working in 20min. (max. 10%) Speed: 10, 16, 20, 24, 29mm/s (0.39", 0.63", 0.79", 0.94", 1.14" per second) Limited switch: built-in (non-adjustable) Installing size: 155mm (4.13") Protection class: ip54 Operating temperature: -20 ~ +65.
Hman Machinery Co., Ltd, specialists in design and manufacture Hydraulic power pack, Hydraulic Cylinder and linear actuator (Solar tracker linear actuator). China Hman Machinery Trading Co., Ltd, specialists in design and manufacture Hydraulic power pack, Hydraulic Cylinder and linear actuator (Solar tracker linear actuator). We design and manufactur in-house using the latest design and matured technology, this enables us to be competitive in the world market. In applications such as Balers, Tipper Trucks, Dock Levelers, solar track, wheelchair, fitness equipment, Trailers and Scissor Lifts etc, we are able to provide high levels of response, product quality and service. Using our years of experience china hman machinery offers power packs and actuators to a growing OEM and distributor market CE approval with ISO9000.
China Hman Machinery Factory Professional manufacturer various kinds of solar tracker, plasma LCD TV lift, hydraulic power pack, cylinder, linear actuator, linear actuator for fitness/door/window/for kitchen/bed/ linear actuator for solar tracker and for RV is new products with high efficency. Our linear actuator widely used in lifting equipment, agricultural machine, medical machine, marine equipment, fitness equipment, solar tracker, satellite, etc. Input voltage - 12V DC / 24V DC / 36V DC Static load - 20000N Dynamic load - 6000N - 8000N Speed - 2.8mm/?4.2mm/? Stroke Length - 18in/ 24in/ 36in Working frequency - 20% Stroke protected switch - adjustable switch Noise level - 65dB Temperature range ¡§C 40
Manufacturer specialized in electric actuators and valves for 40 years ISO9001,Explosion-proof,CE,API Certificates insure trustworthy quality and stable performance of products Wide market in Mid East,Asia and Europe. Reasonable price and professional service. 1.Production Instruction: DKJ and ZKJ series quarter-turn electric actuator is terminal control set for survey of industrial process and control system. It can transfer control signals of system to the position of damming off element of angle displacement valve of output shaft or other adjusting mechanism, so that the medium under control can be operated under specified state of the system. 2.Parameters: Travel:90 Rated load¡§oo100Nm-10000Nm Input signal:4-20mA DC;0-10mA DC Power supply:220V,or according to customer¡ê¡ès demands Operating environment: Temperature:-10a+55; Humidity:95%,excluding corrosion medium in ambient air 3.Features: simple-structure, economic and practical. Stable performance, longer operating life. 4.Type:DKJ-2100,DKJ-3100 DKJ-4100,DKJ-5100,DKJ6100,DKJ6100A,DKJ7100,DKJ8100 We are manufacture as per customer's requirements including material,size,dimension,pressure and standard. High-quality plywood.
Rated load:100-10000Nm Input signal:4-20mA DC or1-10mA DC Power supply:220v Operating environment: Temperature:-10-+55 Humidity: 95%,excluding corrosion medium in ambient air. Features: Simple-structure, economic and practical, stable performance, longer operating life. High-quality plywood.
PSL electric actuator.
CE certificate Material: Aluminium alloy. Torque: 100Nm, 200Nm, 400Nm, 600Nm. Bottom connection size: 100Nm--14-F05/F07£¬200Nm--22-F07/F10£¬400Nm and 600Nm--22-F07/F10. 90operational time:15s, 30s, 45s ,60s, Voltage: DC24V, AC24V, AC110V, AC220V, AC380V. Operational Angle Range: 100Nm--Adjustable from 0 to 360. Above 100Nm--Adjustable from 0 to 90, Control Circuit: T Series, modulating circuits. Weight: 4.5kg to 9kg. Enclosure Rating: IP65. Mounting Direction: 360 installed at any angle. Ambient Temperature: Minus 30 degrees Celsius to 60 degrees. -30-+ 60. Three-dimensional spherical instructions cover, bracket and coupling, open type base or closed type base are all optional. HT-T series LCD intelligent modulation electric actuator is the perfect combination of integrated PID and electric actuator. With both a variety of functions of PID controller (to control temperature, pressure, pressure, flow, level), and functions of actuators, its simple to design and install, low cost for users. With the standard 4 to 20mA signal channel ,common to be access to temperature, pressure, pressure, flow, level and other sensor, calculated by PID module in the actuator, control the valve switch, feedback the sensor changes a closed regulation loop was formed. HT-T series LCD intelligent modulation electric actuator has a user friendly interface. 1, the user can set the upper and lower limit with 4 ~ 20mA sensing signal corresponding to the indicated value on the field. 2, the user can set the target operating point 3, the scene changes can adjust various parameters of PID controller in order to achieve the best conditioning effect. 4, Switch the Chinese and English menu for the use of different language areas. 5, Switch the manual and automatic function. 6, password to avoid the mistakes of non-professional. 7, optional infrared remote, convenient and comfortable. Non-invasive parameter adjustment. 8, optional bus interface, can access to equipment management system for data exchange and remote configuration.
Features: [Working voltage]: 12/24VDC [Stroke]: 50-500mm [Speed]: 3-20mm/s [Ip grade]: Ip65 [Shell color]: Silvery White [Duty]: Cycle 10% [Limit switches]: Built in, not movable [Max Charge]: 1500N. Carton or Wooden case.
Description: Runyn mini linear actuators RYLA-04 series are made for window open and other furniture, the linear actuator could push/pull max 750N force. Specification: Voltage: 12VDC or 24VDC Stroke: 50, 100, 150, 200, 250, 300, 350mm Load Capacity: 750N max No-load Speed: 4~25mm/s Max 45mm/s Duty Cycle: 10% Limited switch: Built-in Installing Size: Stroke+ 140mm IP Grade: IP54. Color: Silver, white, black. Feature: Feedback POT Signal Warranty: 12 Month Labor. Packing in carton.
Supporting weight: 150g Dimension:ª¦83.7mmí-29.5mm Operating Voltage:DV9Ví½16.5V Nominal Voltage:DV12V Operating Current During Travel:í_80mA Sliding Current During Travel:í_125mA Operating Temperature Range:ú¡40íµí½80íµ Travel Angle:í¦20íp Manual Torque:1.0í½1.5Níñm Electric Torque:0.25í½0.75Níñm EMC:í_3mV Sound Level:í_60dB 100pcs/carton 35x28x27cm 18kgs
HIC Series pneumatic actuator Design HIC Series pneumatic actuators incorporate latest mechanical technology, materials available and our patented technology, through designing, developing, testing and engineering application, we have obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, and highest levels of corrosion protection, wide selection of model with easy and economy. Structure 1. Indicator Position indicator with NAMUR is convenient for mounting accessories such as limit switch box, positioner and so on. 2. Pinion The pinion is high-precision and integrative, made from nickel alloy steel, full conform to the latest standards of ISO5211, DIN3337, NAMUR. The dimensions can be customized and the stainless steel is available. 3. Actuator body According to the different requirements, the extruded aluminum alloy ASTM6005 body can be treated with hard anodized, powder polyester painted (different colors is available such as blue, orange, yellow etc.) or PTFE or nickel plated. 4. End caps Die-casting aluminum powder polyester painted in different colors, PTFE or nickel plated. 5. Pistons The twin rack pistons are made from die-casting aluminum treated with hard anodized or made from cast steel with galvanization .Symmetric mounting position, long cycle life and fast operation, reversing rotation by simply inverting the pistons. 6. Travel adjustment External stroke adjustment screw can adjust í+4ípat the position of 90íp. 7. High performance springs Preloaded coating springs are made from the high quality material for resistant to corrosion and longer cycle life, which can be demounted safely and conveniently to satisfy different requirements of torque by changing quantity of springs. 8. Bearings & guides Made from low friction, long-life compound material, avoid the direct contact between metals. The maintenance and replacement are easy and convenient. 9. O-rings NBR rubber o-rings provide trouble-free operation at standard temperature ranges. For high and low temperature, viton or silicone is used. Features í± Extruded aluminum ASTM6005 body with both internal and external corrosion protection having honed cylinder surface for longer life and low coefficient of friction. í±Dual piston rack and pinion design for compact construction, symmetric mounting position, high-cycle life and fast operation, reverse rotation can be accomplished in the field by simply inverting the pistons. í±Multiple bearings and guides on racks and pistons, low friction, high cycle life and prevent shaft blowout. í±Modular preloaded spring cartridge design, with coated spring for simple versatile range, greater safely and corrosion resistance, longer cycle life. í±Die-casting teeth on piston and pinion for accurate low backlash make rack and pinion engagement with maximum efficiency, having long term corrosion resistance with stainless steel fasteners. í±Full conformance to the latest specifications:ISO5211, DIN3337 and NAMUR or product interchangeability and easy mounting of solenoids, limit switches and other accessories.
1.Model: RN-0.5T,1T,2T,3T,5T,10T,15T,20T,30T,40T,50T,100T 2. Elevating,Lowering,Pulling,Pressing,Pushing,Rolling 3. Positioning precision, safely self-locking,Heavy duty,Uniform lifting speed and fully synchronized 4.Static loading: 0.5T ~100T (per set) 5.Dynamic loading: 0.1T ~ 26 T (per set). Wooden box.
Worm Gear Screw Jack Feature: 1. Model: RN-0.5T,1T,2T,3T,5T,10T,15T,20T,30T,40T,50T,100T 2. Configuration: worm shaft,worm gear,bearing,oil seal,housing and Trapezoidal Screw 3. Function: Elevating, Lowering, Pulling, Pressing, Pushing,Rotating 4. Power Source: Manual or Electrical 5. Characteristic:Positioning precision,Safely self-locking,Heavy duty,Uniform lifting speed,small sizes,easy installation,low noise,long life 6. Static Loading: 0.5 ton ~ 100 ton 7. Dynamic Loading: 0.1 ton to 26 ton Plywood box
1.Supply voltage: ac, single phase, 230v, 50hz. 2.Power consumption: 20 watts. 3.Stroke: factory set at 900, 1600 or 2700. (field adjustment in steps of 30 is possible). 4.Auxiliary switch (optional): 2.5a, 250v, 50hz, no or nc. (operated at only one fixed point). 5.Feedback potentiometer: 135Ω standard matched to stroke angle of either 900, 1600 or 2700. (the maximum permitted power dissipation is 1w for 900, 1.5w for 1600, & 2w for 2700). 6.Torque-speed capabilities: total gear ratio is adjusted at factory to obtain the following combination of torque and speed. Standard cotton box
Actuator Weather proof(ip67), explosion proof (exd iic t6) Ce certification
