PT-100 WZPK-330 Nusa Penida power
Since its establishment, YOYIK has always adhered to the principle of technology first and quality first. It has a team of senior engineers and technical workers in the industry. They integrate their rich experience in power station construction into product design and manufacturing to ensure efficiency and accuracy in every link. The company provides a full chain of services from equipment selection to after-sales maintenance, guided by customer needs, continuously optimizes solutions, and promotes the development of the energy industry.
Yoyik can offer many spare parts for power plants as below:
#DF-PT-100 WZPK-330 Nusa Penida power-DF
Heater for low woltage switchgears DRJ100 100W
Rotor Position proximity Transducer ES-11
Power unit FDPC200-A
LIMIT SWITCH WL-CA2-2
resistive linear position sensor TDZ-1E-43 0-135
CBU Board CS05711OU
Sensor DF310806
Transmitter Vibrasi Fan Dual vibration monitor PDM1201-AXX-B1-C0-D1- E2-F0
Thermistor HSDS-40/Z
SPEED MONITOR XJZC-03A/Q
AMMETER 6C2-A
LVDT Sensor 4000TD-15-01
LVDT Converter ZDET-300B
SENSOR VIBRATION VELOCITY SZCB-01-A2-B1-C3
mag pickup speed sensor NE3971-31-90-08-02-00
RTD WRP2-221
high temperature lvdt TDZ-1E-03
CARD MODULE MODUL POWER 2SA5031-5EE13-4BA4-Z
ROTOR ECCENTRICITY PR6424/010-010
DF Communication cable RS232
Socket for relay 62.33.9.220.0300
Diode MDC-55A-1400V
automatic temperature WSSX-411 0-100â?? L=75MM M27*2
Temp sensor PT100 WZPM2-08-120-M18-S
Bolt electric heating rod ZJK3-12
Serial Communication Card PCA-485B
8mm Eddy Current Sensor TM301-A02-B00-C00-D00-E00-F00-G01
LVDT transmitter XCBSQ-01/600-01-01
speed sensor CS-3-M10-L220
Synchronous signal measuring card U12
thermal resistor sensor TR-301-306
Shear Pin CJX-09
DC bolt heater (hose) ZDK/�¦22*650*460
magnetic pickup distributor ZS-04 L=90
Temperature measuring element WZPMA8.7*16B-3*800
Sensor DF312580-90-02-02
PT-100 WZPK-330 Nusa Penida power
MY-DFYL-2025-3-6
Heater for low woltage switchgears DRJ100 100W
YOYIK has laid out the market with a global vision and established a wide network of power station spare parts sales and service in China to ensure that it can quickly respond to the needs of global customers. The company's products are exported to many countries and regions. By providing products and services with international standards, YOYIK has established a good brand image in the international market.
Yoyik can offer many spare parts for power plants as below:
#DF-Heater for low woltage switchgears DRJ100 100W-DF
proximity sensor rpm measurement CWY-DO-812506
LVDT sensor TDZ-FRD-301
Air Pressure Regulator 67CFR-225/SB
Pressure Switch 52RN-KK116-M1-C2A-XX618
Turbidimeter LPV417.99.00002
Middle Relay JZX-22F
positioner DVC2000
NEPM meter KV
type b thermocouple WREK2-331
Limit Switch ( SOLDO SX01200-10U77A3
Rotor Position proximity Probe ES-11-M14x15-B-00-05-10
Camera IST-M938SRZ 900TV
High energy igniter DKGP-20
Sensor for measuring H2 purity KQL1500
Electric actuator SND-Z30-24S
Bolt electric heating rod ZJ-20-T1(R)
Limit Switch D4A-4501N
cam bien ap luc truoc luoi chan rac 9NN-EE45-M4-C1A-X371
Digital Temperature Monitor LWK-Z3T8(TH)
lvdt position transmitter DET500B
Bolt electric heating rod ZJ-22-52
Signal modules â?? analog 6ES7232-4HD32-0XB0
dc pressure switch RC861CZ097HSSYMA59
Glass window components TC-SMW-16-5
FLAME IMAGE MONITOR CAMERA LHJTT-II-2EG
Controller for H2 purity analysers DC3500-CE-0Y00-200-10000-00-0
MDC module MDC 100A-1600V
Power free oil inlet automatic circuit breaker RN1UBQ01-HKXS
Differential Pressure Switch 2 4NN-K5-M4-CIA
LVDT transmitter XCBSQ-04/200-02-11
Eddy Current Sensor PR6426/000-001
Displacement Transducer TD-1 100S
speed sensor DF6202-005-050-04-01-01-000
circuit board ME8.530.004
Acoustic conduit DZXL-VI-J
Rotor Position proximity Sensor Extension Cable ESY-80
Heater for low woltage switchgears DRJ100 100W
Digital Electronic Tension Meter (DTM-501) for Yarn Copper Wire Fibre
DTM Series Digital Tension Meter
Tension measuring 128 * 64 LCD display, late-model design, comfor table handfeel , easy operation, measure the value of direct display tension, maximum, minimum, and can store records of measurements to determine the quality control of the actual tension values. It can be widely used in wire,
strip processing time of tension measurements (such as: yarn, steel wire, copper wire, copper strip, tape, film, fiber-optic cable, carbon fiber lines, etc.).
Digital Electronic Tension Meter (DTM-501) for Yarn Copper Wire Fibre
DTM Series Digital Tension Meter
Tension measuring 128 * 64 LCD display, late-model design, comfor table handfeel , easy operation, measure the value of direct display tension, maximum, minimum, and can store records of measurements to determine the quality control of the actual tension values. It can be widely used in wire,
strip processing time of tension measurements (such as: yarn, steel wire, copper wire, copper strip, tape, film, fiber-optic cable, carbon fiber lines, etc.).
MV AIS SWGR up to 24kV
IEC62271-200 ( LSC2B PM )
Switchgear for Primary Distribution
Energy Distribution Medium Voltage
Air-insulated, metal-enclosed, metal-clad medium voltage switchgear up to 24kV
Withdrawable ROL Vacuum CB
Full compiance with new IEC 62271-200class ( LSC2B Ã? PM )
86460 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
Medium Voltage -Switchgear, up to 17.5 kV Type
Application: Power supply system
Power supply companies
Application: Industry
Power stations
Cement industry
Automobile industry
Iron and steel works
Rolling mills
Mining industry
Traction power supplies
Chemical industry
Petroleum industry
Pipeline installations
Offshore installations
Electrochemical plants
Impact specimen gap hydraulic broaching machine is the only instrument gap for processing the qualified sample except the optical curve grinding machine. Because of processing theory once, the identity of processing the gap is very nice. This broaching machine adopts w18cr4v manufacturing, high hardness, wear resistance, and every tool can process the sample as many as 20, 000.
Electromagnetic Flowmeter
explosion-proof electromagnetic flowmeter
intelligent electromagnetic flowmeter
Product code: 145538-152
Update time: 2015.08.25
Views: 1304
Processing custom origin: In kaifeng
Type: Type flow meter SKLD series
Measuring range: 2000 (m3 / h)
Level of accuracy: 0.5
Nominal diameter: DN3-3000 (mm)
Working pressure: 0.6 ~ 4 (MPa)
Working temperature: - 10 ~ 150
Product Overview
SKLD type electromagnetic flowmeter is the intelligent electromagnetic with research and development, which adopts domestic and foreign adva nced technology. Electromagnetic transducer with high-speed central processing unit (CPU) and the features of rapid computing speed and high precision, reliable performance measurement are in both Chinese and English menu.Electromagnetic Flowmeter is divided into one type of electromagnetic flowmeter and split electromagnetic flowmeter,Insert electromagnetic flowmeter.
Electromagnetic flowmeter can be divided according to the use of function:liquid flow meter,water flow meter,sewage flow meter,Intelligent electromagnetic flowmeter,explosion-proof flow meter,irrigation flow meter,mud flow meter
Sensor uses non-uniform magnetic field technology and special magnetic circuit structure. Magnetic field is stable and reliable, and the circuit structure reduces the volume, The sensor can reflect the traffic change timely and effectively, and have a stable value of measuring water, sewage, slurry, pulp, acid, alkali, salt slurry liquid and food, etc. There are lots of wide applications in the petroleum chemical industry, metallurgy, coal, water conservancy project of water supply and drainage, sewage treatment etc. The electromagnetic flowmeter has two types: the compact and the sensor for remote transmitter.
Product Features
In-line unimpeded flow components, measurement of almost no loss of pressure, low straight pipe requirements
Measurement results and the velocity distribution, fluid pressure, temperature, density, viscosity and other physical parameters
Blank-pipe measurement function without additional electrode, continuous measurement, the fixed value alarm
Velocity measuring range: 0.1-15 m/s, velocity resolution: 0.5 mm/SEC
Low frequency square wave excitation and excitation frequency: 1/16, 1/20, 1/25 power frequency power frequency power frequency
High frequency square wave excitation and excitation frequency: 1/2 power frequency (applicable to size measurement) (optional)
Explosion-proof instrument can be used for the corresponding explosion-proof occasions
Turbine flowmeter
compressed air flowmeter
gas flowmeter
Product name: turbine flowmeter
Product code: 164912-752
Update time: 2015.08.25
Views: 346
Processing custom origin: in kaifeng
Type: type flow meter LWG series
Type: impeller type flowmeter
Measuring range: 0.4-20000 (m3 / h)
Level of accuracy: + / - 1.5%
Nominal size: 10-500 (mm)
Working pressure: 2.5, 6.3, 16
Working temperature: - 20 ~ 55
Summary:
Turbine flowmeter can be divided according to function name gas flow meter,flue gas meter,steam flow meter,gas flow meter,compressed air flow meter,liquid flow meter.
LWG type turbine flow sensor and receiving electrical signals of the display instrument of Turbine flowmeter, which is used to measure low and medium viscosity closed pipes
Degree of fluid (liquid or gas), the total volume flow and in petroleum, chemical industry, metallurgy, aviation and scientific research departments for a wide range of applications.
Sensor is composed of turbine sensor components and amplifier, the structure of the two together for one-piece: to measure the structure of the positive and negative flow
For two-way type; With inserted rod can be installed in the large diameter pipe flow body flow structure for a plug-in.
Based on the principle of moment balance sensor work. When the fluid flows through the sensor, promote the impeller rotation, when the flow rate must be dynamic torque
Maintain and drag torque balance, the impeller speed. Evenly distributed on the permeability of the impeller blade with the impeller rotation, to periodically change detection
The reluctance of the magnetic field sensor (coil), electrical pulse signal detector, after the amplifier amplification output. The output electric pulse frequency and impeller speed
Is proportional to the impeller speed is proportional to the flow in, so the output electric pulse frequency is proportional to the flow sensor flow, 4-20 ma signal is converted is proportional to the flow.
Features:
1) impurity resistance is strong, tangential impeller rotating at can release floating debris in the fluid at any time, when the winding on tangential impeller blades.
2) resistance to electromagnetic interference and strong vibration resistance.
3) the structure and principle of the sensor and display instrument is very simple, user especially easy to master its use and maintenance technology.
4) after replacement of impeller and bearing, meter coefficient is constant.
5) wide flow range, lower limit velocity is low.
6) complete sets of flow meter for the measurement of the fluid volume error is small.
7) almost no pressure loss, save power consumption.
8) sensor can be installed in open air, the sensor can be submerged in the water use for a long time.
9) have a globe valve sensor, install and remove all don't need to stop.
10) horizontal, vertical, inclined pipe can be used.
11) complete sets of flowmeter the purchase, installation, and low cost.
Ring chamber orifice meter
ring chamber orifice meter manufacturer
Product name: Ring chamber orifice meter
Product code: 151116-813
Update time: 2015.08.25
Views: 860
Processing custom origin: in kaifeng
Type: type throttling device LWG
Type: volumetric flowmeter
Measuring range: 0-100 (m3 / h)
Level of accuracy: + / - 1.0%
Nominal size: (DN50- DN2600 (mm)
Job stress: 40 or less (MPa)
Working temperature: 70 )
Summary:
throttling device, also known as differential pressure flowmeter, Orifice flowmeter contains (integrated orifice flow meter, standard orifice, annular orifice flow meter, integrated annular orifice flow meter)
Ring chamber orifice meter can be divided according to function name gas flow meter, flue gas meter, steam flow meter, gas flow meter, compressed air flow meter, liquid flow meter.
LWG type series annular orifice meter is SIKE measurement and control technology co., LTD., henan overview on the research and development on the basis of the standard orifice throttling flow sensor, because it USES annular single structure, make measurements in all kinds of dirt medium through the orifice plate with a circular seam between pipe can easily pass. So the circular orifice flowmeter is widely applied in the dirt medium flow measurement. Circular orifice itself comes with a measuring tube. In central measuring tube fixed a concentric circular plate - flow plate, the plate of the bearing steel in the mouth (10) and take pressure staggered, so bearing steel downstream of the flow of the fluid resistance is negligible, and the upstream flow plate without any block, can make the upstream velocity distribution axisymmetric completely, is advantageous to the geometric similarity and dynamic similarity, improve the accuracy of measurement. Circular orifice meter is suitable for various fluid (gas, steam, liquid medium, such as: saturated steam and superheated steam, compressed air, all kinds of exhaust gas, burning furnace, cooling water, heavy oil, residual oil, fuel oil, condensate, all kinds of corrosive chemical solution, etc.
Features:
1, not only can measure the general fluid flow, and can also be applied to contain various impurities such as dust, suspension, precipitation, etc.) of the fluid, such as a variety of hot gas, flue gas, natural gas, cooling circulating water, etc.
2, measuring saturated steam superheat steam can avoid stop steam condensate accumulation formation, when steam again to send, can quickly into the accurate measurement.
3, instrument ontology has a straight measuring tube, on-site installation, the installation error (such as eccentric, sealing gasket into pipe) has no effect on meter almost.
1. The test angle is based on national standards gb4706.1-2005 (iec60335-1: 2004) chapter 11, " fever " in the design and manufacture of test requirements.
2.The test angle is mainly used for a variety of electrical, temperature testing provides electrical products meet the standard requirements of environmental conditions temperature test. The actual test sample can be customized with different distribution specifications, test angle number and dimensions of the measurement points.
The spray tester ipx 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is convenient positioned by the spray tester ipx 3/4. The spray pattern of the nozzle is made to the specifications of ie60529. The removable shield feature make it easy to test without the interference of the shield.
It is used to evaluate the resistance tracking performance of solid insulating material surface under the combined influence of electric field and humid or contaminate medium. Sum up,it is used to measure the compare tracking index (CTI) and electrical resistance index (PTI).
1. Material: Alloy Steel, Carbon Steel, Stainless Steel, , Cast Iron, Aluminum, Copper, Brass and so on
2. Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on.
3. Surface Treatment: Galvanizing/Zinc Plating, chrome plated, Black oxide Treatment, Spray Paint, Mirror Finish, Sand-blasting and so on according to ROHS demand.
4. Inspection: All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product enter into the market.
Use the TDS Meter to:
Check the performance of your water filter
Check for the hardness (1 grain=17ppm)
Make sure you always drink pure water.
Features
Hold function saves the measurements for convenient reading and recording.
Auto-off function:turns off meter after 10 minutes of non-use to conserve batteries.
Dual Range: Measures from 0-999ppm,with a resolution of 1 ppm. From 1000 to 9990ppm,the resolution is 10ppm, indicated by drinking x 10 symbol,Factory calibrated.
Advantages:
Taking Temperature Measurement
1.Once the meter is on,the temperature function can be used at any time, in or out of liquid.
2.Press the TEMP button.The display will switch to temperature(in Celsius only).
3.To return to TDS mode,press the TEMP button.
Precaution and notes
Do not drop the entire TDS meter in water or dip beyond the maximum immersion level.This unit is not covered under the warranty if water enters the unit.
2. Do not store the TDS meter under high temperature or direct sunlight.This will shorten the life-span of the product and potentially avoid the warranty.
3. The TDS-3 meter is calibrated at 642ppm. It is recommended that the calibration level should be the similar to the sample to be tested.If you are testing higher ppm(member,water quality association).
Calibration
Your meter has been factory calibrated well.
warranty
1.Three year warranty: The product is warranted to the purchaser against material and workmanship for three(3) years from date of purchase.
What is covered:
Parts and labor , or replacement at the companyâ??s option. Transportation charges to the purchaser.
What is not covered:
Transportation charges to the company. Damages from the abuse or improper maintenance (see operating instructions and precautions). Any other consequential damages, incidental damages ,or incidental expenses,including damages to the property.Some states do not allow exclusive or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
FAQ
Question 1: What is the MOQ of this item ?
Answer: The item MOQ is 5000pcs.
Question 2: How to pack this item?
Answer: Box packing is our usual practice, you can also send us your packing design, and we can packing as your requirement.
Question 3: How to make payment?
Answer: You can make payment by T/T,Paypal.Western Union and of course cash face to face at our factory.
Question 4: What is the lead time?
Answer: Our lead time is within 10 days after receive your payment based on MOQ:5000PCS.
Question 5: Can you accept OEM & ODM?
Answer: Yes, we can accept OEM &ODM
(TL-101) Digital manometer measures gauge/differential pressure from -55H2O to +55H2O(2 psi)
It features 11 selectable units of measure: in H2O, pis, bar,mbar,Kpa,inHg,mmHg,ozin2,ftH2O,kgcm,
additional features include data hold and auto power off disabled,careful use of this meter will provide years of reliable service.
Features:
1.Max / minimum / average, and with a relative time
2.Large LCD backlit dual display
3.Zeroing, offset, and data compensation
4.Low battery display and automatic shutdown
5.Data Hold and Error code
6.9Vbattery
7.Client can calibrate the meter by oneself
Specifications:
1.Pressure Range:+/-5psi(TL-101)
2.Accuracy:+0.3% FSO (at 25oC)
3.Repeatability: +0.2% (Max+0.5%FSO)
4.Linearity/Hysteresis:+0.29% FSO
5.Response Time:0.5Seconds Typical
6.Over Range Indicator:Hi
7.Under Range Indicator:Lo
8.Operating Conditions:0 to 50oC(32 to 122oF)
9.Storage Conditions:-10 to 60oC (14 to 140oF)
10.11 Selectable units of Measure
11.Max / minimum / average, and with a relative time
12.Large LCD backlit dual display
13.Zeroing, offset, and data compensation
14.Low battery display and automatic shutdown
15.Data Hold and Error code
16.9Vbattery
17.Client can calibrate the meter by oneself
OEM is acceptable
CE and ROHS are approved
Lowest shipping cost could be provided
Features:
1.Light,temperature and humdity measurement
2.Lux and Fc unit switchable
3.Celsius and Fahrenheit switchable
4.Auto range
5.Large LCD with Backlight
6.Data Hold Function
7.Min/Max/Avg Function
8.Detachable Sensor
9.Low Power Consumption
Specifications:
Light measure range: 0.1 to 200,000 Lux(Fc switchable)
Accuracy:¡¨¤4%(0.1 to 10,000Lux);¡¨¤10% above 10,000Lux
Resolution:1 Lux/0.1FC
Sampling:0.5sec
Temperature range:-10~50oC(14 to 122oF)
Accuracy:¡¨¤1oC/¡¨¤1oF
Humidity range:20%~90%RH
Accuracy:¡¨¤5%
Operation temperature:0 to 50oC(32 to 122oF)
Operation humidity:10 to 90%RH
Storage temperature: -10 to 60oC(14 to 140oF)
Storage humidity:10 to 75%RH
Size:220*55*35mm
Weight:220g(included 9V battery)
1.High-precision calibration: charging current, discharge current, charging voltage and discharge voltage are all calibrated by Agilent with high precision to ensure the accuracy of current and voltage within 0.5%.
2.Independent channels with configurable parameter and condition setting for each individual channel.
3.Equipped with complete input and output devices, hardware and software protection, polarity reverse protection, power failure protection and etc.
4.Precise control without overshoot during CC-CV and CV-CC transition.
5.Strong software system and friendly HMI (Human-Machine-Interface).
6.Multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting.
7.Automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data.
8.Equipment hardware control loop uses current and voltage double loop control. No ripple for constant current and constant voltage switching.
9.Data exported as EXCEL and TXT files, as well as chart files, can be shown as data analysis waves for charging and discharging, voltage, capacity, current & time feature.
86460 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
