Oxygen Sensor O2 Gas Sensor KE-25/50 KE-25 5 years long life KE-50 10 years long ilfe KE-25-F3 screw-thread type, 5 years long life Description: Based on the fuel cell and lead acid battery technologies(eletrochemical principle); The sensor life is very long(5 years and 10 years,depending on the environment); Measurement range by 0-100% O2; Specifications: 1) range:0 ~ 100% O2 2) accuracy : KE-25 +/-1% FS; KE-50 +/-2% FS 3) temperature:5-40°C 4) response time:KE-25 14+/-2S; KE-50 60+/-5S 5) initial output voltage under standard test conditions: KE-25 10-15.5mv ; KE-50 47 ~65mv Features: 1) Long life :KE-25 - 5 years / KE-50 - 10 years in ambient air 2) Virtually no influence from CO2, CO, H2S, NOx, H2 3) Low cost; Stable output signal 4) Operates in normal ambient temperatures 5) No external power supply required for sensor operation 6) No warmup time is required Applications: Medical - Anesthetic instruments, respirators, oxygen-enrichers; Biotechnology - Oxygen incubators; Food industry - Refrigeration, greenhouses; Safety - Air conditioners, oxygen detectors, fire detectors Oxygen Sensor KE-25F3 Screw Thread ConnectionOxygen Sensor KE-25F3 Screw Thread Connection
1. SlottedType(Slotted) Rupture disc(LK) The weakness is artificially made in the slotted rupture disc. Its burst pressure is controlled by the weakness. When the system to be protected is overpressure, the disc is stretched bidirectional. Then the weakness bursts to release the pressure. Thus play a role of protection. The disc applies to medium, low pressure. It can be used in gas, liquid, dust etc. working condition. There are some splinters after the bursting. 2. Forward Domed Score Tensile Type Rupture disc(LC) The disc make the cross"+"or annular score in the arch face. When the system is overpressure, the disc burst along the score to release the pressure. Thus play a role of protection. The disc applies to medium, high pressure; It can be used in gas, liquid, etc. working condition. No splinter after blast. Be Able to connect with safety relief valve in series. 3. Reverse Compressive Score Type Rupture disc(YC) The disc make the cross "+" score in the concave face. When system is overpressure, the disc is destabilized and turn over .It burst along the score to release the pressure. Thus play a role of protection.. Medium can be gas. No splinter after burst. Be Able to connect with safety relief valve in series. 4.Reverse Compressive Knife blade Type Rupture disc (YD) The disc has a complete arch face, which is pressed. When system is overpressure, the disc is destabilized and turns over. And it is punctured by the holder to release the pressure, and then protect the equipment. Medium can be gas. Be Able to connect with safety relief valve in series. 5.Reverse Compressive ToothRing Type Rupture disc (YE) The disc is a complex combined by monomer diaphragm and tooth shaped ring. The arch face is pressed. When system is overpressure, the disc is destabilized and turns over. And the disc is punctured by the tooth shaped ring to release the pressure. And then protect the equipment. The rupture discs apply to medium, low pressure. It can be used in gas. Be Able to connect with safety relief valve in series. 6.Reverse Compressive Score Hinge Type Rupture disc(YCE) The arch face of the diaphragm has annular score and together with hinge combined to composite rupture disc. The arch face is pressed. When system is overpressure, the disc is destabilized and turns over .and burst along the annular score to release the pressure. And then protect the equipment. The rupture discs apply to full vacuum, pressure pulsation. It can be used in gas,. liquid, etc. working condition. Be Able to connect with safety relief valve in series. 7.Other Types : Graphite Rupture disc Door- Shaped Rupture disc(LKM) Welding Type Rupture disc(LPJ, YCJ, YEJ) Ejector Pin Rupture disc(YT)
Elastic unit is developed by our elastic unit workshop. We possessed the professional production line and advanced technology assembly and inspection equipment, a engineer team with wide experienced technicians, a advanced management system, the elastic sensitive unite is famous for adopting various material, reasonable design, excellent processing, good quality. Our institute adopted the aviation technology to develop the civil product, we have the elastic sensitive unite: metallic spring elements, diaphragm, pressure (or vacuum) capsule, metal welding bellow, mechanical seal , wave washer, "O" sealing ring (including "C" sealing ring), vapor steam trap, various floating ball, etc. Meanwhile, According to different requirements from customers, adopt correct process to manufacture product with materials as beryllium copper, austenite stainless steel, elastic alloy, precipitation harden stainless steel, etc. the elastic sensitive unite have high sensitively, long-serve life, high temperature, high resistant pressure density and used in wide applicable range, can be used as key measuring components, seal components, compensating components, and supply various kinds of pressure measurement sensor.
Product description: Capacity(kg) B(mm) H(mm) W(mm) T 50 100 200 50.8 77 18.5 M10x1 300 50.8 77 24.5 M10x1 500 50.8 77 24.5 M12x1 1000 50.8 77 36 M12x1 2000 70 86 45 M16x1.5 3000 80 100 50 M18x1.5 5000 92 130 58 M20x2 Compact structure, high accuracy, good stability and made of best alloy steel. Application for electronic platform scale, batching scale and other weighing system Technical parameters:
Original P/N: M1193A original MP series M1193A neonate wrap spo2 sensor for MP20,MP30,MP40 Latex free one year warranty 1pcs/bag pls contact if bulk purchase
Hi, I'm Lynn from Apollosense Ltd,As a professional supplier of sensors for 15 years,we specilized in Gas sensors,Pressure sensors,Liquid level sensors,Humidity sensors and so on. If you are interested with our products you can contact me any time. And the website of our company is www.apollounion.com ,you can learn about it there. Waiting for your early reply. DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module’s linear frequency output. FEATURES APPLICATIONS • The best combination of cost effectiveness and performance • Stable, linear proportional frequency output from 10% to 95%RH • Stable and reproducible characteristics with temperature • High reliability and long term stability Humidity Sensor Specific Features • Instantaneous de-saturation after long periods in saturation phase • Fast response time • High resistance to chemicals • Not affected by water immersion • Patented solid polymer structure Temperature Sensor Specific Features • High quality thermistor • Stable • High sensitivity
Product description Advantage of kaisi product Compact size, complete type High test accuracy Long-life using Easy installation Passed ce(certificate of compliance) Good after-sale service Technical data Series ks15 Output typeDigitalAnalogue Stroke range0~500mm0~400mm Resolution0.004 0.002 0.001Infinitesimal Output signalC(npn/pnp) pull-push line driver0~5ko 0~10ko 4~20ma 0~5v, 0~10v 485 232 Linearity0.05%fs0.5%fs~0.1%fs Working voltageDc5v or dc5-24vDc10-30v or none Working temperature-25?~85?-45?~125? Net weight450g450g Protection classIp54~ip65Ip54~ip65 Service life5 million~10 million5 million~10 million Cable length4m2m Package and delivery 1pc per box and the carton size is 11.5cmx8.5cmx9.5cm Delivery in 3-7 workdays after receiving payment. Goods shipping by ups, ems, dhl or other express way After-sale service We test goods before delivery and provide 12 months quality guarantee. Factory overview Kaisi manufactures linear position transmitters with analogue and digital signal output. We supply effective stroke from 0mm to 50, 000mm. Also, we accept oem, water-proof and explosion-proof order. Our products passed ce(certificate of compliance) already. Any inquiry about our product and company will be highly appreciated here. Any inquiry, please feel free to contact us. And we will reply you asap. -
|ON SEMICONDUCTOR | APTINA | CCD IMAGE SENSOR | GERMANY wide range of ON SEMICONDUCTOR, GERMANY CCD image sensor available from 1MP to 29 MP in GERMANY. ccd image sensor GERMANY,ccd image sensors GERMANY,cmos GERMANY,image sensors GERMANY,cmos sensor GERMANY,image sensor GERMANY For product details go to our webpage http://www.image-sensor.in/ccd-image-sensor.php For more details go to our corporate website http://www.image-sensor.in or drop an email to us at sales.overseas@balaji-microtechnologies.com or sales.india@balaji-microtechnologies.com -
Place of Origin: Shanghai, China (Mainland) Brand Name: GN Model Number: CX-XD600/300 Experience: More 20 years Exported: More 80 countries Warranty: One year Working: Stable and Reliable Standard: ISO and CE Technology: Advanced Maintenance: Easy and little Application: Widely Operation: Easy Function: Multiple
Model Number: LS11 Usage: Magnetic Sensor Theory: magnetic reed switch Output: digital signal Type: Proximity Sensors Floater Material: PP Color: White Temperature range: -30℃~80℃ Min breakdown voltage: DC250V~350V Cable length: 100mm~500mm Breakdown voltage: 250~600VDC Size: Diameter23mm*40mm Keywords: Liquid Level Sensor Contact Rating: 10W We can offer the door to door service by air or by sea, just depend on your actual request. Such as DHL, UPS, TNT, FEDEX… by air; and the sea transportations to all over the world, including: America, Canada, Brazil, Russia, Mexico etc…
Product Applications: 1: induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, water dispenser, microwave ovens, electric heaters and other appliances temperature control and temperature sensing. 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection 5. Air conditioning equipment, heating equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, a rechargeable battery pack and charger The Product Sells Point: Key Specifications/Special Features: 1: Appearance production requirements: 1: cylindrical shell size: 3 * 8,4 * 20,5 * 25,5 * 30,6 * 30,5 * 80,6 * 100, etc. (can be customized according to customer requirements), the unit: (MM) 2: File Dimensions: can be customized according to customer requirements 3: Cable length: according to customer requirements 4: Wire: PVC and Teflon wire and cable (customized) 5: Wire colors: black, white, red, yellow, green (can be customized according to customer requirements) 6: thermistor parameters: according to customer requirements 7: Housing Material: nickel-plated brass or stainless steel 2: Product Features: 1: MF53 series NTC thermistor for temperature sensor 2: Wide range of resistance: 1KO ~ 500KO 3: Resistance and B value of high accuracy, consistency, and interchangeable 4: good insulation, high reliability, reflecting the fast, 5: with double sealing process, with good sealing and insulation resistance to mechanical impact, anti-bending ability, high reliability 6: Can a long time stability (in the resistance drift rate =1 ‰) 7: The package can be used depending on the installation conditions, user-friendly installation 8: Operating temperature range: -40 ~ 200 ? 3: Model Description: MF 53 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?53-- various band shell temperature sensor NTC thermistor. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check
Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc. The Product Sells Point: Key Specifications/Special Features: A: Size chart MF52 NTC with epoxy to lead Note: The size and wire color according to customer requirements! II: Product Features: 1: MF52 series of products for the lead with an epoxy coating type 2: Wide range of resistance: 0.1KO ~ 500KO 3: Resistance and B value of high accuracy 4: moisture proof, good insulation, high reliability, small time constant 5: small, reflecting the speed 6: is stable for a long time, consistency 7: Operating temperature range: -40 ~ 125 ? 3: Product Applications: Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries. Four: Model Description MF 52 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?52-- epoxy encapsulated NTC thermistor temperature sensor. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Five: MF52 Series Model Specification Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check
Connector, speed sensor, dc cabinet.
"!!! Specific price, Size, Weight Are subject to Inquiry!!!" Competitive brands:&�©|160;rexroth, HAGGLUNDS, AVENTICS, Danfoss, Parker, MOOG, sunhydraforce, EOWARDS, Leybold, INFICON ,NSK and other European and American brands. Products:|160;plunger pump, solenoid valve, gear pump, vane pump, direction valve, servo|160;valve,&|160;proportional valve, hydraulic valve, hydraulic pump,&|160;etc
A&S Construction Machinery Co., Ltd. supplies all types of sensors. All the brands of sensors we can provide: CAT sensors, KOMATSU sensors, JOHN DEERE sensors, SANY sensors, XCMG sensors, VOLVO sensors, HITACHI sensors, SUMITOMO sensors, LIEBHERR sensors, DOOSAN sensors, CASE sensors, BOBCAT sensors, KUBOTA sensors, YANMAR sensors, HYUNDAI sensors, DAEWOO sensors, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
For laboratories, the cell samples stored in liquid nitrogen tanks are relatively precious. If liquid nitrogen is not added in time, the cell samples will lose their activity due to insufficient liquid nitrogen, causing unnecessary losses. To avoid this kind of situation, we can choose a liquid nitrogen tank alarm to help us check how much liquid nitrogen is left in the tank, and remind us to replenish it in time when the liquid nitrogen is insufficient. What is a liquid nitrogen tank alarm? The liquid nitrogen tank alarm is specially developed and produced for measuring the liquid nitrogen balance and temperature in the liquid nitrogen tank. It uses imported high-precision sensor probes and is powered by dual 18650 large-capacity batteries. The USB port can be connected to an external power supply for power supply and charging. It has an ultra-low power consumption design. A single battery can last for 4 months (real-time data is reported once every 10 minutes). With accurate measurement and excellent performance, it is widely used in liquid nitrogen cryogenic equipment, pharmaceutical warehouses, cold chain transportation, laboratories and other places. working principle: It uses imported high-precision sensor probes to measure the temperature of liquid nitrogen and output information to the terminal; Liquid nitrogen tank alarm features: 1. Imported high-precision probe, with high measurement accuracy, large range and good consistency. 2. With a cloud monitoring platform, there is no need to monitor hosts, collectors and other equipment. 3. Easy to use, you can use the mobile APP or log in to the web page to view the data. 4. Support SMS alarm and email alarm. 5. Realize cloud monitoring of high temperature, low temperature, high humidity, low humidity, offline, low battery, power outage, etc. Note: The temperature probe should be fixed in the appropriate position according to actual needs. 6. Low power consumption design, using a large-capacity battery, rechargeable; the battery is anti-reverse connection, and the phone will not burn if the battery is installed backwards. 7. Offline recording function, normal monitoring and recording of data when the network is disconnected, and automatic reporting to the cloud platform after the network is connected. 8. Desktop wall-mounted magnetic structure design, easy to install; has super stability and anti-interference ability.
There are two sensors that each landing gear that play the main role, namely the lock-up sensor and the drop-down sensor, which are used to switch on the transmission position signal when the lock-up and lock-down are completed in the landing at take-off phase.
The RAD-S200 waterproof radiation probe uses an advanced Geiger (GM) sensor as the core sensing device, with stable data and responsive points, which can quickly detect hard �², �³ and X-rays in the environment or in liquids in real time (energy compensation type), and quickly find radioactive sources and measure the dose rate in the environment or in liquids in real time. Mainly used for radiation monitoring system integration, X-ray machine leakage, security inspection machine, hospital, medical wastewater, lakes, oceans and other occasions, factory has been calibrated, using RS485modbus-RTU protocol output, users can directly read the data through digital communication protocol.
RAD-S101 fixed radiation sensor probe adopts all-metal GM counter imported from Russia, stable and reliable data, can detect hard �², �³ and X-ray in the environment or product in real time, and quickly find radioactive sources, mainly used in radiation monitoring system integration, X-ray machine leakage, security inspection machine, hospital and other occasions, factory has been calibrated, The user can read the data directly through the digital communication protocol. And can be connected to the external sound and light alarm, can prompt the field personnel to pay attention to radiation protection, to avoid sustained radiation exposure hazards. At the same time, the measurement data can be uploaded to the radiation safety management system in real time, which is convenient for the storage of the measurement data, and the query and statistical analysis of subsequent historical data and alarm information.
Fence Vibration Sensor A fence vibration sensor is a security device designed to detect and alert you to any vibrations or movements occurring along a fence or perimeter. How a fence vibration sensor typically works and its key features Detection Technology: Fence vibration sensors employ various technologies to detect vibrations or disturbances along a fence. Common detection methods include piezoelectric sensors, accelerometers, and seismic sensors. Installation: These sensors are typically mounted on or near the fence or barrier that you want to monitor. They should be strategically placed to cover vulnerable or critical areas. Sensitivity Settings: Many fence vibration sensors allow you to adjust their sensitivity to different levels of vibration. This helps reduce false alarms caused by minor disturbances like wind or small animals. Wired or Wireless: Depending on the model, fence vibration sensors can be either wired or wireless. Wireless sensors are more convenient to install and can transmit alerts to a central control panel or a connected security system. Alerts: When the sensor detects vibrations or movements, it can trigger various types of alerts. These may include sounding an audible alarm, sending notifications to a security monitoring service, or activating security cameras. Integration: Fence vibration sensors are designed to integrate with existing security systems or smart home platforms. This allows you to monitor and control them through a smartphone app or a centralized control panel. Power Source: These sensors can be powered by batteries or connected to a power source. Battery-powered sensors are more versatile and can be placed in remote areas without access to electricity. Weather Resistance: To withstand outdoor conditions, fence vibration sensors are often built to be weather-resistant or even waterproof. Ready to install into any new or existing type of perimeter fence: wire, chain link, welded mesh, razor wire, lard wire Applications of fence vibration sensors include Intrusion Detection: They can detect unauthorized attempts to breach a property's perimeter, alerting property owners or security personnel. Asset Protection: Industrial facilities often use fence vibration sensors to protect valuable equipment, machinery, and materials. Wildlife Monitoring: In some cases, these sensors are used to monitor wildlife movements or detect the presence of animals near a fence, such as in conservation areas or farms. Critical Infrastructure Protection: These sensors are crucial for securing critical infrastructure like power plants, data centers, and military facilities.
