24v 12v Power Toroidal Transformer
(Click here for Customized Design And Interactive Design Service)
Single-phase toroidal transformers, power range
from 20VA to 5000VA. Designed and tested
according to EN61558. Suitable for installation
in electronically equipment.
Designed as a safety isolating transformer with
separate insulated windings and prepared for
class II equipment.
Short circuit and overload protected with
thermal fuse on primary side. Up to 50% less
weight than a similar conventional transformer.
Low magnetisation currents and no-load losses.
Applications:
Suitable as safety isolating transformer in
constructions where low weight, flexible
dimensions and optimum conditions between
dimensions are preferable.
Technical specifications
Input voltage: Customized
Frequency: 50-60Hz
Output voltage: Customized
According to: EN61558
Test/insulating voltage: 4kV AC RMS
Construction class: II
1 Product Range:15kVA-10000kVA, up to 44kV
2 System voltage: max. 36 kVA 200 BIL
3 Coolers: corrugated wall or radiator
4 Oil preservation: hermetically sealed or conservator/free breathing
5 Tap changer: off-circuit or on-load
6 Cooling medium: mineral oil, Midel
7 Steel type core clamping system
8 High voltage (HV) multilayer winding
9 Low voltage (LV) foil winding or layer winding
10 Winding materials aluminium or copper
11 temperature class transformers
12 Low noise solution
13 Efficient transformers with reduced losses
14 Liquid-filled
15Used in special conditions
16Sophisticated facilities
17 Usage of wooden case
18 3D package for drawings
19 Special test like Zero Sequence Impendence test
20 Cooling: ONAN, ONAN/ONAF, KFAF, KFW
++++Service condition
a) Suitable for indoor or outdoor application
b)Air temperature: Maximum temperature: +40¡æ; Minimum temperature:-30¡æ
c) Humidity: Monthly average humidity 95%; Daily average humidity 90% .
d) Altitude above sea level: Maximum installation altitude: 2000m.
e)Max wind speed:35M/s
f) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
g) No frequent violent shake
Core: wound by high quality cold grain silicon, annealed by advanced vacuum annealing furnaces to improve electronic data, any dimension from customer are available
Wire: copper and aluminum are available weld aluminum enamel wire well to save your cost 15 to 35%, based on our know-how technology
Thermal protector: cutoff and switch are both available
Applications:
Electronic meter and apparatus
Cable tv and digital network
Electronic control
Medical equipment
New electric power supply
Decorative illumination system
Monitoring and control equipment
Installation: horizontal (non-conventional-type base plate), sunk, side type and bridge
Label info: certificate logo, basic electronic data, manufacturer's information also can be printed according to customer's request bar code is available based on customer's request
Capacity: 5va to 5kva
Phase: single
Input voltage: ac power with voltages of various countries
Output voltage: ac or customized
Frequency: 50 to 60hz
Power factor: 0.9 to 0.98
Efficiency: 75 to 98%
Voltage regulation: 12 to 3%
Output no-load loss: 0.5 to 10.0w
Temperature-rise: ¡¨¹85¡ãc
Insulation class: b: 130¡ãc e: 120¡ãc
Testing items: no-load test (no-load current, voltage and loss) load test (load voltage, temperature-rise) inductive voltage test dc resistance test safety test
We are one of the leading manufacturer of all types cts of any ratio. We manufacture both outdoor and indoor types. We manufacture both resin cast & oil cooled cts
With high efficiency, low inrush current and low noise characteristics which are popular in the market. We also make reactor inductor for inverter of solar power with low loss and low noise.
Power range 1000va to 30kva
Phase single/three phase
Input/output customized
Insulation class ul class b, f, h, n (optional
Isolation 4kv hi-pot
With high efficiency low inrush current and low temperature rise characteristics which are popular in the market. The transformer efficiency is up to 98%.
Power range:1000va to 30kva
Phase: single/three phase
Input/output:customized
Insulation class:ul class B, F, H, N
Isolation:4KV
Sikes offers a complete line of industrial control transformers, which provide stepped-down voltages to machine tool control devices.
It¡¡¥s specifically designed to meet high inrush industrial applications where electromagnetic components such as relay, solenoids and magnetic motor starters are used.
Technical parameters
Insulation class: h
Environment exists without gas, steam, chemical deposition, dust or dirt that will affect transformer¡¡¥s insulation seriously, explosive or corrosive medium is not allowed.
Standard: iec726:1982 dry power transformer , gb6450-86(equivalent to iec726:1982)
Standard carton or wooden case based on the custom made product.
Isolation transformer is used for low-voltage distribution system, isolate load from power, reject stray common mode and dc voltages, ground loop potentials, electromagnetic interference (emi) and radio frequency interference (rfi) from
Dielectric strength: l-l, l-g 4000vac/50hz/60s. Free of arcing breakage
I se is less than 65db (to be measured at the point 1 meter away from the reactor horizontally) .
Protection class: ip00 or as customer required.
Insulation class: h
Environment exists without gas, steam, chemical deposition, dust or dirt that will affect transformer¡¡¥s insulation seriously, explosive or corrosive medium is not allowed.
Standard: iec726:1982 dry power transformer , gb6450-86(equivalent to iec726:1982)
Standard carton or wooden case to the custom made transformer
Common mode choke is an important component in switching power supply, frequency inverter and ups. The choking
High magnetic permeability
Good frequency performance, initial permeability µ 0 can be adjusted according to insertion loss in different frequency ranges, which varies from 30000~100000
Very high initial permeability, an effective suppression of emi spike noise.
Huge ranges of permeability adjustment
1.In the dc-immune current filtering and choking coiles in auto audio system, filtering inductance in power supply.
2.Smoothing inductor, stored inductance, dmc, pfc correction inductor, etc.
Properties:
1.Made of fe-based amorphous ribbon, low loss in high frequency.
2.Magnetic circuit closing, reduction of flux leakage, excellent characteristics of anti-dc current skewing of magnetic field.
3.High permeability, to be adjusted by changing the winding turns.
Paper ctn
21423 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
