Jiangyin Spark XH-SCT-T24 Series split-core current transformer , Diameter 24mm , Max rated current 300A ,output 0.333V ,1.0% class ,UL list
Features:
Small size, low cost
High secondary turns
Secure locking hinge
Features:
Maximum continuous primary current 5A to 300AAC
Current Ratio: 3000: 1
Output: 0.333 Volt or mA at rated current
Accuracy: �± 1% from 5% to 120% of rated current
Insulation Voltage: 600VAC
Maximum Primary Voltage: 5000VAC(Insulated Conductor)
Phase angle: Less than 2 degrees at 50% of rated current
Frequency Range: 50 Hz to 400 Hz
Operating Temperature: -15C to 60C.
Leads: 4Foot(105cm), UL 1015, Twisted Pair, 0.34 mm2(22AWG)
CE recognized, and RoHS compliant
Output and leads can be customized
Dry Transformers up to 3.6 MVA, 33 KV (Indoor & Outdoor)
EGYTRAFO Group produces a wide range of Dry type Cast Resin transformers up to 3.6 MVA, 33 KV which are suitable for indoor and outdoor installation (inside an enclosure with certain IP) and ambient temperatures up to 45oC.
Dry type transformers is a reliable alternative for oil immersed transformer with low running costs, free maintenance, environmental friendly and suitable for operation under heavy load fluctuations.
* Different types:
Impregnated LV, Casted HV
Casted LV, Casted HV
Al â?? Al winding (Aluminum)
Cu â?? Cu winding (Copper)
* Cooling Methods:
Air Natural (AN)
Air Forced (AF) : Increased Power by 35-40 %
* General Characteristics & Advantages:
Fire resistance :
In locations where the fire risk associated with the use of mineral oil is unacceptable like offices, shopping complexes, apartment buildings, hospitals etc.
Maintenance free:
No liquids/oil to contaminate, break down, leak or explode and burn
Insensitive to moisture
High overloading capacity
Long and stable lifetime
Installation close to load centers (maximum safety)
Easy to connect and install
Immediate switch-on
Easy to repair
No special requirements for installation room
Environmentally safe
Hardly inflammable
Low operational cost and service expenses
High performance, reliability and high short circuit strength
* Field of Applications:
Transportation means as railways underground, trams, and tunnels
Locations with vibrations and shocks (like ships and cranes)
All products comply to IEC standardsKEMA Certified
Types of Oil immersed transformer:-
A- Standard distribution transformers: Ratings from 25 KVA to 3500 KVA with vector group Dyn 11
Pole-mounted transformers
Pad mounted transformers
· Step -up transformers
Step -down transformers
B- Special Design Transformers: High rating up to 15000 KVA, 33 KV
â?? Various numbers of taps for instance: (5,7,9,12,.21, etc..
â?? Dual voltage transformers for both: primary and secondary side
Testing transformers according to customer ratings and data
Isolating transformers according to customer ratings and data
EGYTRAFO Group can design new solutions for Oil & Gas, Utilities, and Industrial sectors, according to their existing networks, and requirements.
C- EARTHING Transformers / Zigzag.
D- Auto-Transformers: O.L.T.C Auto Transformer with rating up to 600 A & 9 tapping positions.
All products comply with IEC Standards
KEMA Certified
If the secondary voltage of the Transformer is a high voltage, it is called as Power Transformer. Makpower supplies power transformers which transform energy from higher voltage levels and to distribute this energy to lower voltage substations or directly to large industrial consumers.
200 Amp 3 ph Motorized Control Digital Variable Voltage Auto Transformer [Oil Immersed]
[HSN CODE: 85044029] [Make: POWERSELECT]
Technical Specification:
Model: PS200A3POEM470V
Rated Power: 150 KVA
Input Voltage: 415 V AC 3phase�?�¸ (L - L), �?�±5% 50 / 60 Hz 4 wire / 3 wire
No Load Current: Less than 1% of rated unit
Output Voltage: 0 - 470 V AC 3Phase�?�¸, (L - L) �?�±10% 4 wire / 3 wire
Output Current @470V: 0 - 200 Amp per phase max
Variac Oil Qty: 250 L (Approx. +- 10 L) Recommended IS335
Reference Standard: IEC 61378-1 & IS 5142 : 1969
Voltage Variation: Motorized Operation with 10 kg torque AC Synchronous Servo Motor
Servo Motor: 10 Kg torque AC Synchronous Servo Motor 220 V AC 1 ph. (Make: PowerSelect)
Coil Construction: 1 Coils used in per phase of 200 Amp each rating
Total Coils: 3 Coils used in unit each coil rating max 200 Amp
Current Transformer: 3 nos. 200/5 Accuracy class 0.5%
Protection: 3 pole MCCB on Primary line (Make: L&T)
Enclosure IP Rating: IEC 60529, IP50 (Sheet Steel) with powder coated paint (Color: Siemens Gray)
Connection Terminals: DMC molded bar insulators terminal
Oil Drain: Oil Drain valve tap bottom of tank front sided
Oil Level: Oil level indication front of tank with glass view
Earth Terminals: Ground / earth terminals provided back sided
Winding Wire: IS 12444, ASTM B-49 Pure Copper DCC wire
Core Type, Grade of lamination: CRGO Laminated Core 30ZH100
Load : balanced load
Service: Indoor Application
Variac Dimension (LxBxH) and Wt (Kg): 24 x 38 x 60 (Approx) Net Wt: 450 Kg (Approx.) Gross Weight: 550 kg
21423 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
Sub Merged Arc melting furnace transformers are manufactured in 3 phase system upto 12.5 MVA and Bank of 3 nos, single phase, transformers for higher than 12.5 MVA transformers.
DAQGPCT485 split core current transformer is a kind of current sensor transformer which can convert AC analog signal into RS485 digital signal launched by Shanghai Data Acquisition IOT Technology Co LTD The product has builtin 32bit ARM series MCU and highprecision metering chip and is a multipoint calibrated current conversion module It has the characteristics of high precision and fast response DAQGPCT485 can directly interact with common data acquisition gateways DTU programmable controller PLC and host computer
This product is widely used in AC motor lighting equipment air compressor heating ventilation and air conditioning equipment building selfcontrol system equipment OEE open rate industrial Internet rural power transformation projects and other scenarios of current monitoring and acquisition scenarios
2 Service Concept
Our company solemnly promise you
You buy more than just products but also meticulous and thoughtful technical support
We provide free remote guidance remote configuration and commissioning services and send data to the server specified by the customer
Free IOT solution consulting services
3 Product Characteristic Parameters
Line Sequence Definition
Red12V BlackGND Yellow485A White485B
Length of LineDefault 1 meter
Acquisition Characteristic
Current detection range AC 02A100AOther large range transformers can be customized
Electrical Characteristic
Power supply mode524V DC
Operating power consumption05W
Operating frequency5060Hz
Communication Characteristic
Transmission modeRS485
Communication protocol Modbus RTU
Structural Characteristic
MaterialABS plastic housing
Installation methodBuckle mounting
Working Environment
Temperature 20C70C
Storage Environment
Temperature 20C80C
4 The Core Advantages of the Product
High precision measuring chip high measurement accuracy
Open type design easy to install
Easy installation and fast deployment helping IOT projects land quickly
5 Description of the Modbus Communication Protocol
51 Serial Port Communication Parameters
Baud rate9600 Data bit8 Verify NONE Stop bit1
52 Function Code Definition
The upper computer uses 03 function code to read data or receive alarm data
The host computer controls the lower machine equipment transformer using 06 function code
The single-phase pole-mounted distribution transformers are specifically designed for the decentralization distribution network of servicing residential overhead distribution loads ot town ana countryside.
They are also suitable for light and diversified power applications. These transformers are designed for the application conditions normally encountered on electric utility power distribution systems.
Offers 2 basic transformer types and two kinds of metal core types Conventional type and Complete Self Protect type, and for the transformer core
Two types of materials are available: C.R.G.O. wound core and amorphous metal core.
Features
.High initial permeability and high AL value
.High effective insertion loss and excellent noise suppression
.Wide frequency range,large adjustable range for permeability from 20000-160000
.Low core loss, small choke size for volume and wieght with epoxy coating
Application:
.Switched-mode Power supplies
.EMI common mode filter
Features:
DC current immunity composite cores is combined with amorphous and nanocrystalline cores together
Magnetic features:
. Strong anti-DC-capacity
. Precision, the scope of application of 0.5-0.1 grade and applicable Current range 1.5-200A
. Good temperature stability
Applications:
.DC current immunity transformers
.Metering transformer in electronic power system
Features:
The adjustable range of permeability
Excellent frequency characteristics
High saturation magnetic induction strength
Lower eddy current losses
Excellent temperature stability
Applications:
Switching Mode Power Supply
UPS Uninterrupted power supply
Pulse welding equipment
Power converter
Strange dc current immunity applicable current range (1.5a-200a)
High linearity, high accuracy class, applicable transformer accuracy range 0.5-0.1 class
Good temperature stability
Core size saving by volume and weight
Applications:
.DC current immunity transformers in electronic energy meter/watt-hour meter
.Metering transformer in electronic power system
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.2%, 0.5%, 1%
Primary current 0 - 3000A AC
Secondary current 0 - 5A AC (customized)
Max. Cont. Input current 3600A
Over voltage category CAT III 600V
Output signal (AC current) 500mA,1A,2A,5A AC at nominal input current
Output signal (AC voltage) 333mV, 500mV, 1V, 5V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20C to +55C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H)(mm) 180 x 319 x 35
Weight (g) 1100
Holding wire diameter (mm) 125
Max. jaw opening (mm) 125
Color Black
Material PC+ABS+Polycarbonate, UL94 V0
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.2%, 0.5%, 1%
Primary current 0 - 3000A AC
Secondary current 0 - 5A AC (customized)
Max. Cont. Input current 3600A
Over voltage category CAT III 600 V
Output signal (AC current) 500mA,1A,5A AC at nominal input current
Output signal (AC voltage) 333mV,500mV,1V,5V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20C to +55C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm) 116 x 327 x 35
Weight (g) 1200
Holding wire diameter (mm) 120 x 50
Max. jaw opening (mm) 50
Jaw Color White
Material PC+ABS+Polycarbonate, UL94 V0
FEATURES
Most cost-effective
Faster installation
Safe and easy installations
High accuracy 0.5
Holding wire diameter: �?16mm
Measurement range of 1mA to 200A AC
Low phase shift for power measurement
Output model: Lead output(2.5m)
Isolated plastic case recognized according to UL94-V0
Small-size, compact size, light-weight
Over-Voltage protection circuit is installed.
CE, UL / EN 61010 - 1 certified
PARAMETERS
Technical parameters
Standards IEC/EN60044-1 & IEC61010-1 & IEC61869-2&ANSI C57.13
Ratio 1000: 1 or 2000:1 , customized
Nominal input current Primary current 20A/30A/40A/50A/60A/80A/100A/150A/200A
Overload withstand 1.2 times rated current continuously
Accuracy 0.2%, 0.5 %, 1%
System Voltage 720V(0.72kV)
Output signal 10mA-200mA AC optional
333mV AC or 100mV-2V optional
Frequency range 40 Hz-500 Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Output Standard 2.5 meter cable
Protection Level 3.0V0-P
Installation Category CAT or CAT 600VAC
Max. jaw opening 16 mm
Mechanical parameters
Dimensions (WDH) (mm) 38mm 55mm 18mm
Weight(g) 60
Operating conditions
Operating temperature -25C to +55C
Relative Humidity 0-85% non-condensing
Altitude
