Find professional manufacturers and suppliers of portable AC power supply in China here. Our factory offers portable AC power supply with competitive price.
Find professional manufacturers and suppliers of portable solar power bank in China here. Our factory offers portable solar power bank with competitive price.
Find professional manufacturers and suppliers of portable battery power supply in China here. Our factory offers portable battery power supply with competitive price.
Place of Origin: Shandong, China (Mainland)
Brand Name: Deutz,NPT
Model Number: 10GFT-500GFT
Output Type: AC Three Phase
Speed: 1500RPM/1800RPM
Frequency: 50/60HZ
Rated Power: 5kw-300kw
Rated Voltage: 400/230V ,380/220,450/240V
Rated Current: 9.6-960A
Fuel: wood gas generator
Cylinder: 3,4,6,8
Wood gas consumption: 1.3-1.5kg/kw*h
Actuator: WODWARD,GAC,HEINZMANN etc
ATS: according to ur requirement
Parallel operation for gas generator: accept
Type: open,silent,trailer,mobile,container
Battery: 12/24v
Voltage: AVR
Spare parts: supply
Our main products:ABB Advant OCS,ABB MOD 30/MODCELL,ABB MOD 300,ABB
Procontic,ABB Procontrol,AB Rockwel CPU,Moore APACS,Moore Panel
Controllers,Siemens Iskamatic,Schneider PLC,Quantum,Quanten 140CPU,GE Fanuc
90/30,90/70 ,Invensys Triconex, FOXBOROI/A MOTOROLA
MVME,MVME147,MVME162,MVME167,MVME177 and so on.
Our products are High-end product, zero defect, good source of materials,
good package, good quality.
Advantage brands :
Allen Bradley
1756-L62,1756-L63,1746,1747,1756,1769,1794,2711P..
Analog Input Slave Module IMASI03
Analog Input Module IMASI23
AAnalog Output Slave Module IMASO11
48 VDC Digital Input Module IMDSI14
Digital Input Module IMDSI22
Digital Output Slave IMDSO14
Frequency Counter Slave Module IMFCS01
Analog Input Module IMFEC12
Hydraulic Servo Module IMHSS03
Multi-Function Processor Interface IMMPI01
Remote I/O Slave Module IMRIO02
Sequence of Events Digital Inputs Module IMSED01
Sequence of Event Time Keeper Module IMSET01
Infi-Net to Infi-Net Transfer Module INIIT13
Network Processor Module INNPM22
Analog I/O Extension Module NAIO-01
DDCS/ISA Adaptor Module Kit NISA-03
Pulse Encoder Interface NTAC-02
Analog Input Termination Unit NTAI05
Analog Input Termination Unit NTAI06
Communication Link Termination Unit NTCL01
Control I/O Termination Unit NTCS04
Digital I/O Termination Unit NTDI01
Digital I/O Termination Unit NTDI0
Digital I/O Termination Unit NTRO02-A
High frequency generator
1.Introduction:
High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field.
High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized - rotated - heated by friction. high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating:
1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly.
2). Low heating loss, energy saving.
3).Environment friendly: high frequency is clean power, dust free.
4).Hf power can kill worm and bacteria in the material like timber and grain.
2.Parameter:
Model, hf20-6-ii-ch, hf30-6-ii-ch
Power supply, ac 380 v, 50hz, 3 phase four wire
Input power, 30kva, 45kva
Output power, 20kw, 30kw
Frequency, 6.78mhz/ 13.56mhz/27.12mhz
Radio tube, fu834 fa, fu924 fa
Commutate type, three phase full wave silicon commutate
Cooling type, forced air cooled
Tuning type, variable capacitance
Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection
Output type, one/two outputs, one/two outputs
Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm
Total weight, 700kg, 800kg
High frequency generator
1.Introduction:
High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field.,
High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized -, rotated -, heated by friction., , high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating:
2.Features:
1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly.
2). Low heating loss, energy saving.
3).Environment friendly: high frequency is clean power, dust free.
4).Hf power can kill worm and bacteria in the material like timber and grain.
3.Parameter:
Model, hf20-6-ii-ch, hf30-6-ii-ch
Power supply, ac 380 v, 50hz, 3, phase four wire
Input power, 30kva, 45kva
Output power, 20kw, 30kw
Frequency, 6.78mhz/ 13.56mhz/27.12mhz
Radio tube, fu834 fa, fu924 fa
Commutate type, three phase full wave silicon commutate
Cooling type, forced air cooled
Tuning type, variable capacitance
Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection
Output type, one/two outputs, one/two outputs
Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm
Total weight, 700kg, 800kg
Item NameWITOL Microwave Magnetron
Magnetron Tube model2M4692M463
Typical Output Power1050W1500W
Frequency2458MHz2458MHz
Peak Anode Voltage 4.4kV4.65KV
Average Anode Current430mA430mA
Filament Current10.0A10A
Filament Voltage3.15V3.0V
Outline Demensions130x102x133mm 130x102x133mm
Weight1.8kg1.8kg
Magnetron life under normal operating conditions shall be for the duration of 2000 hours.
Because working conditions under the magnetron life will be on the impact of the user to ensure adequate security conditions, such as the direction of air flow, power on / off, etc.
Item NameLG Microwave Magnetron
Magnetron Tube model2M246 (Standard Type)2M285-04ARCM 2M278
Typical Output Power 1100W 3000W 2000W
Frequency 2460MHz 2450MHz 2455MHz
Peak Anode Voltage 4.40kV 4.5KV 5.4kv
Average Anode Current330mA840mA 730mA
Filament Current10.0A19.5A19.5A
Filament Voltage3.15V4.6V4.6V
Outline Demensions93.2x127x133mm 110mm*110mm*200mm118x100x180mm
Weight0.9kg3.05kg2.29Kg
Magnetron life under normal operating conditions shall be for the duration of 2000 hours.
Because working conditions under the magnetron life will be on the impact of the user to ensure adequate security conditions, such as the direction of air flow, power on / off, etc.
Yb-mp1000
Anode current:300ma-380ma
Output voltage3800v-4200v
Output power :1328w
Advantage:
(1)easy to install.
(2)high efficiency(>90%), unpollute for power grid;
(3)allow the magnetron to achieve the best working point;
(4) wide input voltage range, 185-265v / 50-60hz ac input stability;
(5)forced air cooling by built-in 2 dc fan, operating tempreture :-30~65
(6)protections: short circuit / overload / over voltage/under voltage , moisture / corrosion / rust.
Yb-mp2000
Anode current:3800-4200v
Output power :3800v-4200v
Output power :3200w
Features
(1)cost performance , high efficiency, small ripple, unpollute for power grid.
(2) conversion efficiency, compared to other power sources more energy-efficient.
(3)allow the magnetron to achieve the best working point.
(4) power adjustable, voltage signal control.
(5) has a soft switching function, support multiple power and machine use.
(6) can drive a variety of long-term work magnetron.
(7) undervoltage, overvoltage, over-temperature protection.
(7) wide input voltage range, 185-265v / 50-60hz ac input stability.
(8)forced air cooling by built-in 2 dc fan, operating tempreture :-30-65
(9)protections: short circuit / overload / over voltage/under voltage , moisture / corrosion / rust
(10)small size, light weight, easy to install.
Features
(1)cost performance , high efficiency, small ripple, unpollute for power grid.
(2) conversion efficiency, compared to other power sources more energy-efficient.
(3)allow the magnetron to achieve the best working point.
(4) power adjustable, voltage signal control.
(5) has a soft switching function, support multiple power and machine use.
(6) can drive a variety of long-term work magnetron.
(7) undervoltage, overvoltage, over-temperature protection.
(7) wide input voltage range, 185-265v / 50-60hz ac input stability.
(8)forced air cooling by built-in 2 dc fan, operating tempreture:-3-6
(9)protections: short circuit / overload / over voltage/under voltage , moisture / corrosion / rust
(10)small size, light weight, easy to install.
24V Switching Power Supply For Sale | CNC Router Using
On all CNC router machines, 24v switching power supply is a necessary electronic component which supply 24vdc power to CNC controller (Richauto DSP, Weihong NK DSP) and limit sensor.
We can also say it is a transformer because it converts 220VAC or 110VAC into 24VDC. Power supply 24v is mounted in the electronic cabinet. ET75 and ET120 are the most commonly used models for CNC router.
Features of 24vdc power supply
1) Single output
2) Full range universal AC input
3) Protection: short circuit / overload / over voltage
4) Smart and light
5) With EMI filter inside
21479 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
