Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. 50ohm DC-6GHz, 5W SMA Fixed Attenuator Technical Specifications:
Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that follows a T, L or Pi configuration. Their configuration can either be in waveguide, in surface mount or coaxial, and depending on their application, they can either be directional or bidirectional. Applications: Attenuators are generally used in radio, communication and transmission line applications to weaken a stronger signal. DC-18G,2W SMA Attenuator stainless steel PassivatedTechnical Specifications: NORMINAL IMPENDANCE 50�© FREQUENCY RANGE DC to 18GHz (up to 26.5Ghz optional) VSWR 6GHzâ?¤1.2 12.4GHzâ?¤1.3 18GHzâ?¤1.35 POWER RATING 2W TEMPERATURE RANGE -55�°C to +125�°C Dimensions: �?8*22 mm Attenuation 1,2,3,4,5,6,7,8,9,10,15,20,30dB available, and 1-10dB.�±0.8dB,15-30dB±1dB 2 Watt SMA Fixed Attenuator 18GHz stainless steel Passivated 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 15dB 20dB 30dB 50ohm
The connecting head of hydraulic support is also quite common in the daily procurement of hydraulic support parts. Its main function is to connect scraper conveyor and hydraulic support organically to realize the role of force transmission between them. When working, the connecting head has to move the bracket and push the conveyor to carry out the operation, completing the organic operation of these two links. When the hydraulic support connector works under the alternating stress of tension, compression and torsion, if the working environment in the mine is poor and the air is humid, there may be many unexpected factors, leading to the deterioration of the stress of the connector. Once the connection is damaged, the scraper conveyor and hydraulic support may not work normally, which may be shut down and stop production, causing huge losses. Therefore, it is necessary to check the first vulnerable parts of the hydraulic support connection from time to time, so as to avoid production problems. The hydraulic support connection head is relatively simple in structure, which mainly needs to pay attention to its quality, so as to avoid the stop-production caused by penny wise and pound foolish. More hydraulic bracket connection head information can consult me henan Shuangzhi Machinery for more information
SMA Male Crimp Solder Connector for RG58 LMR-195 RG142 Cable TYPE SMA Connector is a Kind of shmlink RF coaxial connectors that is widely applied, with small-sized thread coupling. Characteristic impedance is 50.The characteristic of connectors is in wide frequency range excellent performanceã??high reliability. They are used in connection with RF cable China or micro-strip line in RF circuit of the WIAN SYSTEM controlled program microwave equipment and the digital communication system. The frequency can be up to 18GHz by using semi-rigid or semi-flex cable.
Car GPS Fakra C Male Blue Right Angle End Launch PCB Connector Place of Origin:Guangdong, China Brand Name:SH-Link Model Number:SHM.900.0006-43.C Type:rf connector fakra Application:RF Gender:male body:plastics standard:IEC 60169 15 Impedance:50 Ohm FAKRA Male Connector for PCB� Working Voltage:335v
Delock FAKRA Z lug spring pin for soldering 2 prepunched holes SHM.900.0006-4.Z FAKRA connector is one of the auto parts. They are widely used in GPS, Remote control, car phone, car TV, hi-fi equipment, antennas, etc. It is mate with the same colors or  FAKRA Male Connector With Spring and socket, and the structure is to be double-locked and fool-proofing for them Major characteristics:  Double-locked, fool-proofing assembly with the color and the structure The connector is be protected by the cap .
Sihanming FAKRA connector is one of the auto parts. They are widely used in GPS, Remote control, car phone, car TV, hi-fi equipment, antennas, etc. It is mate with the same colors or connector and socket, and the structure is to be double-locked and fool-proofing for them FAKRA Straight Female Connector Major characteristics: � � Double-locked, fool-proofing assembly with the color and the structure The connector is be protected by the cap . Easy to assembly Many difference between the connector and the cap. The product technical characteristics: Body: Brass, Ni-plated Socket: beryllium-copper, Gold-plated Pin contact: Brass Insulator: PTFE Fakra Female Crimp Solder Connector wholesale Crimp ferrule: brass, Ni-plated O-ring: beryllium-copper Shell: PA66+30%GF Technical characteristics
TNC male to female RF Lightning surge arrestor TNC male to female RF Lightning Gas discharge tube surge arrestor Surge arrestors are designed to provide excellent lightning protection and outstanding RF performances. Telsto Gas tube lightening surge arresters can be integrated directly into the cabling system and provide reliable surge protection in case of over voltages. Our surge arrestors provide excellent lightning protection and outstanding RF performance. All designs are low return loss, low insertion loss and low intermodulation. *High quality materials *Excellent RF performance *Total weatherproof *Available with type N or 7/16 DIN type *Waterproof *Environment resistance ensures long life and consistent performance TNC male to TNC female RF Lightning arrester -TNC male to TNC female connectors -Protect your antenna and device from dangerous electrical surges Telsto series of DC pass RF lightning and surge protection products with an extended frequency operating band from DC to 3000MHz. It is the perfect RF equipment protection solution for most application requiring DC voltage and current to power tower top mounted electronics, which is suitable for outdoor as well as indoor installations and the special plated ensures durability and long life. Electrical Specifications Frequency Range:DC-3G Input Impedance:5 VSWR:
N Male Angle connector for 1/2 Superflexible RF cable RF Coaxial Connector N Male Angle connector for 1/2 Super flexible RF cable RF Coaxial Connector RF Connector Model: TEL-NMA.12S-RFC Description: N Male Angle connector for 1/2 Superflexible RF cable N Male Angle connector for 1/2 Super flexible RF cable RF Coaxial Connector
MC4 Connectors
IP68 male female waterproof connector Wire section:0.5-1.5mm2 Outer cable diameter:5-9mm;9-12mm Pins:5P Voltage:450V Current:17.5A Temperature:-40-+105 Housing materials:PA66 Contact materials:Nickel-plated brass
HIGO CONNECTOR-F.S-Z*09B More stable, smaller, more convenient design gives more possibilities. MINI B Signal connector Waterproof signal cable Customized Signal connector description Rated Voltage 48V AC Rated Current 2A Withstanding Voltage 500V Insulation Resistance 20M Contact Resistance 10m Mating Type Insertion Force 80N Max, Extraction Force 30N Min Mating Cycles 200Times Operation Temperature -25~+80 Protection Degree IP66 Max Outer Diameter 9mm Mating Length 62mm Contact Material Copper alloy plated with gold which conforms to military standard Wire Section 0.14mm/ 0.20mm We are professional MINI B Signal connector manufacturer.
HIGO CONNECTOR-F.S-L*09C MINI C Customized solutions Waterproof signal connector A more stable, smaller, more convenient design gives more possibilities. MINI C Signal connector Rated Voltage 48V AC Rated Current 2A Withstanding Voltage 500V Insulation Resistance 0M Contact Resistance 10m Mating Type Screw Locking Mating Cycles 200Times Operation Temperature -25~+80 Protection Degree IP67 Max Outer Diameter 9mm Mating Length 68.6mm Contact Material Copper alloy plated with gold which conforms to military standard Wire Section 0.14mm/ 0.20m We are a professional MINI C Signal connector supplier.
HIGO CONNECTOR-F.S-Z209 E MINI E Waterproof signal connector cable Customized Signal connector description Rated Voltage 48V AC Rated Current 2A Withstanding Voltage 500V Insulation Resistance 0M Contact Resistance 10m Mating Type Insertion Force 80N Max, Extraction Force 30N Min Mating Cycles 200Times Operation Temperature -25~+80 Protection Degree IP66 Max Outer Diameter 9mm Mating Length 55mm Contact Material Copper alloy plated with gold which conforms to military standard Wire Section 0.14mm/ 0.20mm We are a professional Signal connector company. Higo has an experienced and dynamic research and development team, all of whom have the world's first-class automotive wiring harness development industry experience, rich knowledge, and can solve a variety of complex needs.
HIGO CONNECTOR-F.S-Z1211 12 PIN Gives More Functions Waterproof signal connector cable Customized solutions Waterproof signal connector Electrical Characteristics Rated Voltage 48V AC Rated Current 2A Withstanding Voltage 500V Insulation Resistance â?¥20M�© Contact Resistance â?¤10m�© Mechanical Characteristics Mating Type Insertion Force 80N Max, Extraction Force 30N Min Mating Cycles 200Times Performance Operation Temperature -25~+80 Protection Degree I Wires Specification Max Outer Diameter 11mm Mating Length 53mm Contact Material Copper alloy plated with gold which conforms to military standard Wire Section 0.14mm We are professional Signal connector supplier. We also support Customized Signal connector.
HIGO CONNECTOR-F.S-Z205 Easy-plugin without poke-yoke Waterproof signal connector cable Customized solutions bike Signal connector description bike Signal connector Electrical Characteristics Rated Voltage 48V AC Rated Current 2A Withstanding Voltage 500V Insulation Resistance 20M Contact Resistance 10m Mechanical Characteristics Mating Type Insertion Force 60N Max, Extraction Force 20N Min Mating Cycles 200Times Performance Operation Temperature -25~+80 Protection Degree IP67 Max Outer Diameter 4.8mm Wires Specification Mating Length 35.4mm Contact Material Copper alloy plated with gold which conforms to military standard Wire Section 0.14mm Higo has an experienced and dynamic research and development team, all of whom have the world's first-class automotive wiring harness development industry experience, rich knowledge, and can solve a variety of complex needs. We are a professional Signal connector manufacturer.
BNC Female Connector to IPEX Our custom RF cable assemblies are built-in and shipped worldwide. RF cable assemblies in 50 ohms can be ordered using the following RA MMCX Male Connector types such as 7/16 DIN, BNC, FME, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, SSMB, TNC, UHF, U.FL and 75 ohms cable assemblies can be made with the following 75 ohms connectors such as BNC, F, N, SMB, SMC, TNC and mini SMB (Double Braid Shield )MIL-C-17 RG316 Coaxial Cable.
Rf coaxial fakra male C code with 1.13 or 1.37 cable assembly RF Cable Assembly is suitable for mass instrument equipment production and producing on the assembly line. Our products have high quality and competitive prices, please feel free to contact us. RA MMCX Male Connector products and applications 1. These products are produced according to the international standard of SSMB and Fakra series etc. All of them are conform to the technical stands of IECDIN&MIL-C-39012. 2. 6G 20G 40G high frequency low loss test cable and test adapter . 3 .FAKRA automotive connectors MMCX connectors for earphone test connector for Mobile phone IPEX series.
2.92mm high frequency male connector can be machined and customized The characteristic of High Frequency Connectors is in small volume light weight reliable connection great vibration performance.they are used in connecting RF coaxial cable in equipments and instruments. if you want buy high quality high frequency connector, you can choose us! Our company is a leader in the industry and we will not disappoint you. We are professional in designing, developing, producing and sale of radio frequency coaxial connectors. We main product FAKRA, MMCX short female connector, MCX, RF coaxial N type PCB connector. Welcome to contact us for more details.
2.4mm high frequency male connector can be machined and customized The characteristic of High Frequency Connectors is in small volume light weight reliable connection great vibration performance.they are used in connecting RF coaxial cable in equipments and instruments. if you want buy high quality high frequency connector, you can choose us! Our company is a leader in the industry and we will not disappoint you.
