Electrical conductors.
5-2 AL Aluminum conductor - AAC For this conductor, the applicable paragraphs of article 4 are: 4.2 & 4.4 The sizes of conductor required are as follows: 95 mm2 19/2.5 mm & 2000 m + 2% per drum. 70 mm2 19/2.1 mm & 3000 m + 2% per drum. 50 mm2 19/1.8 mm & 3000 m + 2% per drum. 35 mm2 7/2.5 mm & 3000 m + 2% per drum.
Conductor is to be sized to carry maximum earth fault current of system at point of application with final conductor temperature not exceeding 160 deg. C (320 deg. F) for at least 5 seconds. Main earthing conductors are to be minimum 120 mm2 or as otherwise required by the particular Section of the Specification.
Twin 'Moose' ACSR having 7-Strands of steel of dia 3.53 mm and 54-Strands of Aluminium of dia 3.53 mm.
POWER CABLES BARE CONDUCTORS AAC, AAAC, ACSR, ACCC, ACKP, AsKP, GW, GSW, TK Please contact us for for details catalogue
Thermal Conductors : We carry brand names such as AAVID Thermalloy, Coors Tek, Wakefield and many others.
Ic, enet cntrl, 10/100m phy, 48lqfp; data rate:100mbps; ethernet type:ieee 802.3u; supply voltage min:3.135v; supply voltage max:3.465v; digital ic case style:lqfp; no. Of pins:48; ic interface type:mii; operating temperature ;rohs compliant: yes Qfp48
Lightening conductors for high raised buildings and towers.
ACSR have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
1.Applications AAAC have been widely used in power transmission lines with various voltage levels,and also used in power lines across great rivers,heavy ice area,and other places special geographical characteristics.The cables have excellent advantages of high strength,large current carrying capacity and good catenary property as well as wear-resistance,anti-crush and corrosion-proof with simple structure,convenient installation and maintenance,low cost for the line,large transmission capacity. 2.Specifications AAAC bear conductor meets or exceeds the following ASTM Specifications: B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purpose. B-399 Concentrical-Lay-Stranded 6201-T81 Aluminum Alloy Conductors 3.Product Performance (1).The electrical performance of AAAC is indicated in DC�©/km(20oC).The resistivity of aluminum alloy wire for stranded wires is: LHA1:not greater than 32.840n�©. m LHA2:not greater than 32.530n�©. m (2).The rated tensile strength of AAAC is denoted with the result of total cross-section areas of all aluminum alloy conductors multiplied by min.Tensile strength of corresponding size specified in the standard for aluminum alloy wire. 4.Material Standard The high-strength aluminum alloy conductor used for AAAC conforms to the standard JB/T 8134-1997(equivalent to IEC 60104:1987). Construction of All Aluminum Alloy Conductor
ACSR Aluminum Conductor Steel Reinforced is used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding for desired strength to be achieved without sacrificing ampacity. Aluminum alloy 1350-H119 wires, concentrically stranded around a steel core available with Class A, B or C galvanizing; aluminum coated (AZ); or aluminum-clad steel core (AL). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease. Also available with Non Specular surface finish.
All Aluminum Alloy Conductor is used for primary and secondary overhead transmission and distribution services. This has been designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio and better sag characteristic. The conductor has a higher resistance to corrosion than ACSR. Stranded 6201-T81 high strength aluminum conductors, conforming to ASTM specifications B399 are concentric lay-stranded, similar in construction and appearance to 1350 aluminum alloy grade aluminum conductors, and has a greater resistance to abrasion than conductors of 1350 aluminum alloy
Concentric lay stranded conductor consisting of Aluminum Alloy 1350-H19 wires. AAC conductor is also known as aluminum stranded conductor. It is manufactured from electrolytically refined aluminum, with a minimum purity of 99.7%. AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminum conductors are made up of one or more strands of aluminum wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance
AAC Conductors are made out of Hard drawn EC Grade (min 61% IACS) Aluminium wires stranded in successive layers in opposite direction to form the Aluminium stranded AAC Conductor up to 61 wires. All Aluminium Conductors are manufactured from electrolytically refined aluminium. They have a high level of purity; the minimum accepted level of aluminium is 99.7%. This product is also known as aluminium stranded conductor, as it is constructed of one or more strands of aluminium wire depending on the intended usage. As a consequence of this high level of purity, AAC Conductors are mainly used in areas where spacing is short and supports are close. Key Benefits : All aluminium bare conductors are used for aerial distribution lines having relatively short spans, aerial feeders and bus bars of substations. Standards: ASTM - B 231 Metric Units ASTM - B 231 TS IEC 1089 DIN 48201 BS 215 UNE 21.018
6.35/11kv xlpe cable Bare conductor aac/aaac/acsr 10kv yjly22/23 3*120mm cable 1000ft cat5e cat6 cat6a cat7 utp cabling H03vh-h H07z-u
Bare Conductor Aac/aaac/acsr
Conductor
Bare conductor
Bare Conductor AAC/AAAC/ACSR
Bare Conductor AAC/AAAC/ACSR
