Gasb is an important iii-v semiconductor for manufacturing midwavelength infrared type ii esuperlattice lasers and detectors. The gasb based infrared lasers and detectors have been widely used to night vision, communications meteorology, atmospheric monitoring, industrial flaw detection, the earth resources exploration, temperature etc. Individual vacuum package
Phase Conductor: Concentric strand or compressed 1350-H19 conductor Neutral Conductors: aluminum alloy 1350-H19,6201-T81, or ACSR conductors Insulation: high density polyethylene (HDPE) or cross-linked polyethylene (XLPE).
1. Central Tube OPGW Single/Double Armourlayers The central stainless steel tube is surrounded by single or double layers of aluminium clad steel wires(ACS) or mix ACS wires and aluminium alloy wires. 2. OPGW With Stranded Layers, Single Tube And Multitube Double /ThreeArmour Layers The stainless steel tube is stranded by double or three layers of aluminium clad steel wires(ACS)or mix ACSwires and aluminium alloy wires. 3. Central Al-covered stainless steel tube OPGW Single/Double ArmourLayers The central Al-covered steel tube is surrounded by single or double layers of aluminium clad steel wires(ACS) or mix ACS wires and aluminium alloy wires. 4. Aluminium tube OPGW Single/Double Armour Layers The Aluminium tube is surrounded by single or double layers of aluminium clad steel wires(ACS)or mix ACSwires and aluminium alloy wires 5. Central Type Aluminum Tube OPGW Single/Double ArmourLayers TheCentral TypeAluminum Tube is surrounded by single or double layers ofaluminium clad steel wires(ACS)or mix ACSwires and aluminium alloy wires.
For use in electrical grounding systems and on insulators for overhead transmission and distribution applications. Stranded conductors offer greater flexibility than solid.
Concentrically stranded Galvanized steel wire strand available in class "A", "B" and "C" galvanizing, "A" being the least heavy and "C" being the most heavy. Manufactured without welds per ASTM A-363 or with welds per ASTM A-475. Strands are formed to remain substantially in place when severed. Zinc-coated grade of steel strand wire /guy wire : Class A ,Class B and class C.
CCS cable is composed of copper clad steel. Solid or Concentric-lay-stranded conductors of copper-clad steel wires. A high strength steel wire with a 25% thick cross-section ratio of Copper cladding creating a high electrical conductivity, highly corrosive resistant and a thermal stability for high temperature operation and all with a lighter weight.
AACSR is a concentrically stranded conductor composed of one or more layers of Aluminium -Magnesium -Silicon Alloy wire stranded around a high strength coated steel core. The core can be of either single wire or stranded multi wire. AACSR is available with steel core of Class A, B or C galvanizing or Aluminium clad (AW). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease.
AAC conductor is also known as aluminium stranded conductor. It is manufactured from electrolytically refined aluminium, with a minimum purity of 99.7%. AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance
Application : AAAC All Aluminum Alloy Conductor is used for primary and secondary overhead transmission and distribution services. This has been designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio and better sag characteristic. The conductor has a higher resistance to corrosion than ACSR. Standards : ASTM B399, AS1531, IEC 61089, DIN 48201, BS 3242; NFC34215, SS4240814 Construction : Stranded 6201-T81 high strength aluminum conductors, conforming to ASTM specifications B399 are concentriclay-stranded, similar in construction and appearance to 1350 aluminum alloy grade aluminum conductors, and has a greater resistance to abrasion than conductors of 1350 aluminum alloy
Backed by a team of skilled engineers, we hold substantial expertise in offering Aluminium Alloy Conductor. The Bharat Cab Aluminium Alloy Conductor, we offer, is made by adopting advanced technology by using Aluminium-Magnesium-Silicon alloy of high electrical conductivity containing calculated amount of Magnesium Silicate that make us assure better mechanical properties. These Aluminium Alloy Conductors, we provide, are used for bare overhead primary and secondary transmission and greatly demanded by the clients for the reliable make. Features : - Better corrosion resistance. - Better strength to weight ratio. - Improved electrical conductivity. Installed At : Seacoast and other similar areas.
We are engaged in manufacturing and supplying Aluminium Conductor Steel Reinforced using advanced technology. The Aluminium Conductor Steel Reinforced of "Bharat Cab" are highly demanded due to the advance make as these are designed by utilizing high tensile steel to achieve a high strength-to-weight ratio. Details : - This conductor has solid or stranded high carbon, high tensile steel core in centre surrounded by strands of aluminium (E.C. GRADE) wires. - ACSR CONDUCTOR is available in a wide range of steel having carbon upto 60%. - The proportions of aluminium and steel can be varied to obtain the relation between current-carrying capacity and mechanical strength best suited to each application, generally, Aluminium content is 68% and steel content is 32%. - ACSR conductor is used as bare overhead conductor for primary and secondary distribution. Applications : - Generation stations to power houses. - City to city. - River crossings. Advantages : - High tensile strength. - Lightweight with longer spans. - Requires lesser supports. - Higher corona limit.
Our packaging materials can retain the products' quality and newness even under extreme shipping and handling conditions. Our packaging provides optimum physical protection. Our organization is highly concerned towards providing excellent quality products to the customers and thus check them at all stages.
We are one of the most renowned company in industry engaged in manufacturing, trading & exporting spacious range of all aluminium alloy conductors. Our conductor is made from aluminium-magnesium-silicon alloy of higher electrical conductivity containing calculated amount of magnesium silicate to give it better mechanical properties after treatment/drawing and thereafter stranded from 7 strands to 61 strands. These conductors are commonly used for bare overhead primary and secondary transmission
Our conductor is manufactured from electrolytically refined (E.C.GRADE ) Aluminium, having purity of minimum 99.5% of Aluminium. This conductor is used mainly in urban areas and the spacing is short and the supports are close. Available in most reasonable market price.
We are one of the most renowned company in industry engaged in manufacturing, trading & exporting spacious range of all aluminium alloy conductors. Our conductor is made from aluminium-magnesium-silicon alloy of higher electrical conductivity containing calculated amount of magnesium silicate to give it better mechanical properties after treatment/drawing and thereafter stranded from 7 strands to 61 strands. These conductors are commonly used for bare overhead primary and secondary transmission.
High quality, seamless performance, high strength, weather & temperature resistance, and smooth operation are some of the salient features of our provided AAC conductors. These are resistant to chemicals, oil, water, moisture, etc. As made using modern machines and quality materials in accordance with defined parameters of the arena. Thus, we are known as a principal manufacturer, supplier and exporter of AAC conductors. Besides, these are available at competitive prices in various specifications. Due to all, these are massively demanded among the users. Features: , reliable. , faultless. , seamless performance. , timely delivery
ACSR conductor consists of a solid or stranded steel core surrounded by strands of aluminium. ACSR conductor is available in a range of steel strengths varying from 6% up to 40%. The higher strength ACSR conductors are used for river crossings, overhead earth wires, and installations involving extra long spans. Against any given resistance of conductor, ACSR conductor may be manufactured to have different tensile strengths as per requirement. The principal advantage of these conductors are their high tensile strength and light weight, covering longer spans with less supports. Due to the greater diameter of an ACSR conductor much higher corona limit can be obtained, giving a big advantage on high and extra high voltage overhead lines. Standards: ASTM - B 399 Metric Units ASTM - B 231 TS IEC 1089 DIN 48201 BS 215 UNE 21.018 Key Benefits: The principal advantage of these conductors are high tensile strength so that they are used for longer spans with less supports. Due to the greater diameter of ACSR conductors a much higher corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines. ACSR conductors consist of a solid or stranded steel core surrounded by strands of aluminum (E. C. GRADE). ACSR conductors are available in a wide range of steel, containing carbon from 0.5% to 0.85 %. The higher strength ACSR conductors are used for river crossings, overhead ground wires, installations involving extra long spans etc. Against any given resistance of conductor, ACSR may be manufactured within a wide range of tensile strength as per the requirement. Key Benefits: The principal advantage of these conductors are high tensile strength so that they are used for longer spans with less supports. Due to the greater diameter of ACSR conductors a much higher corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines.
Specifications Aac condcutor Concentric al stranded condcutor Standards: iec, astm, bs, nfc, csa, etc. Code: iris, aster etc. Overhead line conductor aac 1. Application: Bare conductor made of aluminium wire stranded and corrugate aluminium pipe, maily used as busbar of subsationsin high altitude, widely used in power plant, and substation, especially used as busbar of substation over 2000 meter of altitudes 2. Series: Bare conductor are covering series of conductor, aac, aaac, acsr, acar etc. Corrugated aluminium pipe busbar, made of aluminium wires or aluminium alloy wires stranded around aluminium pipe. 3. Specification: can be produced up to 600-1600 sqmm (equal to aluminium's section-area) 4. Standards: the products can be made complying with the standards: iec, bs, din, astm, csa, etc
Conductors.
Copper or aluminum electrical conductors.Export, manufacture
