The control joint is a combination of two perforated beads that interlock with a PVC rubber joint. It may be used as a control joint in suspended ceilings, drywall, and lining based on project requirements. The control joint is designed to allow up to 4 mm movement in each direction. Advantages: Partition System Lining System Ceiling System
The perforated corner bead is used for exterior corner jointing. It allows the jointing compound to be fully settled on the jointing area; the compound goes through the bead and strongly fix the corner to the boards. It is used in dry lining and drywall partitioning to give a smooth and impact resistant finishing. Advantages: Partition System Lining System
The furring channel joiner is used in ceiling application where connection between two consecutive furring channels is needed. This joiner is easy to install and does not require any special tool to be installed. Advantages: Ceiling System Lining System
Gframe L-bracket is a simple rigid structure in the form of an L. It is used in dry lining and external cladding. Advantages: Lining System Partition System
Silent Hangers are fixed by a threaded rod to hold the main channel in silent ceiling systems. They are used in cinema ceiling systems and have high performance in sound insulation. Advantages: Ceiling System
Stopping Bead is a squared corner metal frame that slides onto the board for a smooth finish in a suspended ceiling application. The finishing coats are applied up to the edge of the bead. Advantages: Ceiling System
The V-bracing accessories are used in cinema drywall partitions to increase the performance of sound insulation. Advantages: Partition System
Gaccessories Perforated Shadow Line Stopping Angle corner bead is used for exterior corner jointing. It allows the jointing compound to be fully settled on the jointing area; the compound goes through the bead and strongly fixes the corners to the boards. It is used in suspended ceiling and false ceiling applications. Advantages: Ceiling System
The threaded rods are steel rods designed to be in full tension state. They are mainly used in suspended ceiling applications. They connect suspended metal profiles (C-channel, furring channel) to the soffit ceiling by using the appropriate drop in Anchor. Advantages: Ceiling System
Gframe Nogging Track is manufactured to support the Gframe C-Stud and prevent its twisting. It is used in drywall partitioning and lining. Applications: Partition System Lining System Dimensions: 40 50 64 70 75 92 100 125 150
Gframe Perimeter L-angle is manufactured and roll formed in 3m strips with varying flange dimensions and gauges. Applications: Partition System Lining System Ceiling System Facade Dimensions: 25x25
Gframe Shadow Gap is a metal frame installed around the perimeter of the gypsum suspended ceiling or door frames, providing an architectural design effect. It provides a trimmed ceiling effect on the edges. Applications: Ceiling System Dimensions: 20x30x15x30 20x20x20x13 20x10x13x20
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The cross tees form the secondary frame of the system. Applications: Ceiling System Dimensions: 15 24
Gframe C-stud is manufactured and roll formed in 3m up to 8m strips with varying widths and gauges to support the structure. Applications: Partition System Lining System Faade Dimensions: 42 50 64 70 75 92 100 125 150
Gframe Curved Track is manufactured to support the Gframe C-Stud and it is used for curved drywall partitions. Applications: Partition System Lining System Ceiling System Dimensions: 50 64 75 92 150
Gframe Head Deflection Track is manufactured to support the Gframe Wall C-Stud from its top and prevent deflection. In addition, it provides enhanced sound insulation and fire performance. It is used in drywall and dry lining. Applications: Partition System Lining System Dimensions: 42 50 64 70 75 92 100 125 150
Gframe Fixing Channel is used as a horizontal member in drywall partitions, and it provides support for the Gframe wall C-Stud. It is used in partition walls and dry lining. Applications: Partition System Lining System Dimensions: 72 150
Gframe Flat Strip is supplied in rolls weighing around 100Kg. The length is cut according to design requirements. It used in partitions of heights above 3.5m. Applications: Partition System Lining System Specifications: Thickness Unit: mm Value: 0.55 / 0.6 / 0.7 / 0.8 / 0.9 / 1.00 / 1.2 / 1.5 Standards: ASTM C1396
Gframe furring channel is roll formed in 3m strips. Widths and gauges vary according to requirements. Applications: Partition System Lining System Ceiling System Facade System Dimensions: 69
Gframe J-Track is manufactured and roll formed in 3m up to 5m strips with varying widths and gauges to match the stud dimensions. Applications: Lining System Shaft Wall System Dimensions: 64 100 150
