Cairo Others Suppliers and Manufacturers

Waterproofing chemicals.Manufacturer

Ceramic leveling system.Export, sea land and air

Dolomite Calcium Magnesium Carbonate CaMg(CO3)2 In England, dolomite has become a useful source for the production of magnesite by reacting calcined dolomite with sea-water. Dolomite is a double carbonate of calium and magnesium, CaCO3, MgCO3. The mineral was first identified by Count Dolomien in 1791 and named after its discoverer. It is of sedimentary origin and is supposed to have been formed due to chemical action of sea-water containing high percentage of magnesia, on limestone. Theoretically, dolomite contains : CaCO3 : 54.35% MgCO3 : 45.65%

Feldspar is the mineral name given to a group of minerals distinguished by the presence of aluminum (Al) and the silica (SiO4) in their chemistry. They form in a variety of thermal environments, during the crystallization of liquid rock (magma), by metamorphism of rocks deep in the earth, and in sedimentary processes. Feldspar Specification Feldspar Medium Grade Chemistry Al2O3 (%)20.5 Max Na2O (%)12.0 Max Fe2O3 (%)0.05 Max TiO2 (%)0.1 Max

Talcum powder is a soft, white powder developed from talc, or magnesium silicate, a mineral composed primarily of magnesium, silicon and oxygen. When it is finely ground, talc absorbs moisture and helps reduce friction.

Talc 45 micron & lumps Containers

Feldspar minerals are sodium, potassium aluminosilicates. this material naturally found in the mine without blending or mixing (Na %4-5 and potassium %4-5) so the behavior of the material will be fixed. this material is very good for sanitary were or in body or special glaze

Sand particles range in diameter from 0.0625 mm to 2 mm. An individual particle in this range size is termed a sand grain. Sand grains are between gravel (with particles ranging from 2 mm up to 64 mm) and silt (particles smaller than 0.0625 mm down to 0.004 mm). we can reach up to 45 micron milled sand with magnetic separation uses • Beach nourishment: Governments move sand to beaches where tides, storms or deliberate changes to the shoreline erode the original sand. • Brick: Manufacturing plants add sand to a mixture of clay and other materials for manufacturing bricks. • Cob: Coarse sand makes up as much as 75% of cob. • Mortar: Sand is mixed with cement and sometimes lime to be used in masonry construction. • Concrete: Sand is often a principal component of this critical construction material. • Glass: Sand is the principal component in common glass. • Landscaping: Sand makes small hills and slopes (for example, in golf courses). • Glaze, frit, ceramic, instead of quartz • Paint: Mixing sand with paint produces a textured finish for walls and ceilings or non-slip floor surfaces. • Railroads: Train operators use sand to improve the traction of wheels on the rails. • Roads: Sand improves traction (and thus traffic safety) in icy or snowy conditions. • Sand animation: Performance artists draw images in sand. Makers of animated films use the same term to describe their use of sand on frontlit or backlit glass. • Sand casting: Casters moisten or oil molding sand, also known as foundry sand and then shape it into molds into which they pour molten material. Oxides % SiO2 99.6 Al2O3 0.2 Fe2O3 TiO2 CaO MgO K2O Na2O L.o.I (1100 C) .020 0.01 0.02 0.01 0.01 0.01 0.10

There is transparent , opaque , and white frit . Double and single fire As customer request ,

Uses of feldspar Feldspar use in several industries like 1- glass industry : by percent 10-15% from the formula that chemical balance happen due to presence of aluminum and basis contain 4-6% K2O, 5-7% Na2O, about 19% Al2O3, and less than 0.1% Fe2O3. Feldspar is used mainly as a source of alumina, which improves both the workability of the glass melt and the chemical and physical stability of the finished product. It also provides the alkaline oxides (Na2O, K2O) that provide fluxing in partial substitution for calcium oxide, which improves chemical resistance, 2- ceramic , porcelain and pottery : as flux to accelerate the melting operation that feldspar melt in lower temperature than the other materials in the formula so can enter to the chemical and physical reaction during melting . 3- other uses : as scraping off material , 4- filler material in plastic , 5- rubber , 6- painting industry . 7- know as electric isolator , 8- dental , 9- a flux in welding electrodes, 10- adhesives, 11- coatings. 12- In filler applications it offers low vehicle demand, high dry brightness with low tint strength, and resistance to abrasion and chemical degradation. In coatings it also provides good film durability and high resistance to chalking and frosting. 13- Some intergrowths of orthoclase and albite have an attractive pale lustre and are called moonstone when used in jewellery. Most moonstones are translucent and white, although grey and peach-colored varieties also occur. In gemology, 14- The gemstone commonly called rainbow moonstone is more properly a colourless form of labradorite and can be distinguished from "true" moonstone by its greater transparency and play of colour, although their value and durability do not greatly differ. Al2O3 Fe2O3 TiO2 CaO MgO K2O Na2O P.F. 1100°C 18.7 0.14 0.33 0.57 0.19 0.1 10.5 0.4

Feldspar minerals potassium, aluminosilicates. Their ores are commonly associated with quartz. we have Nak feldspar, k feldspar 1st and 2nd grade. we can reach up to 45 micron milled feldspar with magnetic separation. Uses of feldspar group: Feldspar use in several industries like 1- glass industry: by percent 10-15% from the formula that chemical balance happen due to presence of aluminum and basis contain 4-6% K2O, 5-7% Na2O, about 19% Al2O3, and less than 0.1% Fe2O3. Feldspar is used mainly as a source of alumina, which improves both the workability of the glass melt and the chemical and physical stability of the finished product. It also provides the alkaline oxides (Na2O, K2O) that provide fluxing in partial substitution for calcium oxide, which improves chemical resistance, 2- ceramic, porcelain and pottery: as flux to accelerate the melting operation that feldspar melt in lower temperature than the other materials in the formula so can enter to the chemical and physical reaction during melting. 3- other uses: as scraping off material, 4- filler material in plastic, 5- rubber, 6- painting industry. 7- know as electric isolator, 8- dental, 9- a flux in welding electrodes, 10- adhesives, 11- coatings. 12- In filler applications it offers low vehicle demand, high dry brightness with low tint strength, and resistance to abrasion and chemical degradation. In coatings it also provides good film durability and high resistance to chalking and frosting. 13- Some intergrowths of orthoclase and albite have an attractive pale lustre and are called moonstone when used in jewellery. Most moonstones are translucent and white, although grey and peach-colored varieties also occur. In gemology Al2O3 Fe2O3 TiO2 CaO MgO K2O Na2O P.F. 1100°C 17.1 0 .044

Dolomite is a carbonate mineral composed of calcium magnesium carbonate CaMg (CO3) 2. The term is also used to describe the sedimentary carbonate rock dolostone. we can make the crushed grain size as customer need, there is different analysis Uses Dolomite is used as 1- an ornamental stone, 2- a concrete aggregate, 3- a source of magnesium oxide and in the Pidgeon process 4- for the production of magnesium. 5- It is an important petroleum reservoir rock, 6- a flux for the smelting of iron and steel. 7- Large quantities of processed dolomite are used in the production of float glass. 8- production of frit for glaze. 9- added to soils and soilless potting mixes to lower their acidity and as a magnesium source. 10- the substrate in marine (saltwater) aquariums to help buffer changes in pH of the water. 11- one of the basic raw materials in the manufacture of flat glass, which are added by 12% as magnesium oxide helps add to the speed of the glass melting process. 12- in the manufacture of refractories due to the high melting temperature to 2800 ° C and therefore is used in the ovens foundries in Tlies containers. 13- used in the steel industry as well as used in furnaces making steel oxygen and furnaces arcs electric – 14- is also used in furnaces smelting to reduce the melting temperature of slag

Specifications: Specifications: Density at 25 degree C: 1.3 g/cm3 min. Softening Point (R&P): 95 : 115 C Water content: 0.2 : 1% max. Coking Value: 52% min. Toluene Insoluble: 27 : 36% Ash Content: 0.5 : 1.7% max. Quinoline insoluble: 7 : 14 % max. Beta Resins: 20 : 22% max. Fixed Carbon: 41 : 44% Volatile Matter: 50 : 57% max.

Specifications: Calcium carbonate not less: 98% CaO: 55-56 % CO2: 43-44 % Fe203: 0.01 - 0.02 % Whiteness: 90 SIZE: 325 MESH

Specification: Chemical Composition: CaSo4.2H2O : 95% min. Cao: (31.70 to 33.00)% SO2: (44.50 - 46.45)% H2O: (18.30 - 20.66)% R2O2: (0.05 - 0.44)% Sio2: (0.06 - 0.70)% Mgo: (0.28 - 0.60)% Co2 : (0.28 - 1.80)% Nacl: (0.14 - 0.30)% Size: 0 - 20 cm

Dear sir / madam El waha for trade company overview: El waha is one of the major exporters of minerals raw materials and fertilizers from the worldwide renowned quarries in aswan - egypt since the inception of the company in 2005. El waha is uniquely positioned as a major trading firm that covers several regional and international markets. The natural progression of our business portfolio has led to position el waha's as the minerals & fertilizers partner of choice in egypt, with its firm management, operation and financial capabilities and undisputed leading position as one of the major non metallic mineral, raw material and chemical fertilizer exporters in egypt due to our stockpiled commodities and product range that cater to customer specifications and providing the perfect platform to extend the coverage to include logistics, quarry facilities, warehouses, transportation and mediterranean and red sea port access. Our range of products include: Mining raw materials 1- rock phosphate p2o5 24% and up to 30% (fertilizers industry) 2- high quality silica sand sio2: 99.6 % min (glass, cement and steel industries) 3- white quartz (paints, glass, ceramic and artificial marble industries) 4- potassium feldspar (glass, porcelain enamel, ceramics industries) 5- talc (paints, paper, rubber, ceramic, medicals and cosmetics industries.) 6- iron oxide (usage for paints, cement factors) High quality agricultural fertilizer 1- granular/prilled urea 46% 2- granular single super phosphate (gssp) 20.0% 3- granular single super phosphate (gssp) 18.0% 4- triple super phosphate (t: s: p) 5- n.P.K Please don't hesitate to contact the undersigned for any queries.

Thermal mud used in the resistance to heat furnaces used in lining furnaces used in the construction furnaces cast A powder This heat resistant powder works to improve production efficiency and service the oven longer Packaging 1-plastic bag weighs 40kg Or any other weight according to the requirements of each client

Metallurgical bentonite Has high blue absorption capacity Has high viscosity Easy to use Reasonable price S Packaging details: 25kg per bag or 40kg or 1 tons in plastic woven bags

Used in the smelting and foundry is also used in the cosmetics industry and is also used in the manufacture of casting almnikan Plastic bags weigh 40kg or big bag weighing 1 ton Or according to customer requirements