Electrical supplies.Export
Mechanical seals, oil seals, other types of seals, silicone sheets, o rings viton & nbr, motion transmission parts, teflon tapes, teflon bronze rods and bars, adhesives, meters, solenoids, foam, food grease.
Purpose: Resists oxidation, - UV Rays and Ozone resists many corrosive chemicals - Has an Excellent operating temperature range of (-45) �°C to 120 �°C. - Dust-Proof, Sound-Proof, Wind-Proof. - Reducing the chances of air and water entering the building. They are highly resistant to water, ozone and ageing which makes them an ideal solution for external applications. Application: Used for roofing sheets, - Weather strips window spacers, - Oil seals Electrical insulations and stinger covers. Dimensions: Width: 150mm X1500mm Length: Up to 30 m. Thickness: 1.5 mm Color: Black
Curtain fabrics Upholestry fabrics made of chenille, taffeta or compound of both We also produce curtains fabrics made of voile, organza , linen Plastic roll 100m/roll
Window panel curtains, shower curtians.
Upholestry fabrics, curtain fabrics.
Packaging materials, vegetables and fruits, ready made garments, dyed fabrics, upholstery and curtains.
Dimensions: - 650mm * 1000mm - Thickness of Rubber: 6mm Description : It consists of -2layers a bottom layer from rubber and a top layer from textile and putting a disinfectant to freak the leg before entering any place to protect from germs Purpose: Disinfectant Mat to protect homes, hospitals and companies from germs, viruses and bacteria Materials: Bottom layer from natural and SBR rubber mix, top layer from Absorbing textile. Physical Specification: Hardness: 5 �± 40 - Tensile: 3.5 N/mm2 - Elongation: %300 - Color: Black Applications: Homes, Hospitals and companies entrance.
Dimensions: Width: 300*400 & 350*450 & 250*400 & 600*700 mm According to loads and customer needs. Height: 8 - 200 mm According to loads and customer needs. Types: - Type (C2): laminated bearing with elastomer comprising steel reinforcing plates in layers and with smooth steel plates in top and bottom. - Type (C4): laminated bearing with elastomer comprising steel reinforcing plates in layers and with shaped steel plates in top and bottom. - Type (B): laminated bearing fully covered with elastomer comprising steel reinforcing plates. - Type (F): Plain Pad bearing, Block from Neoprene Rubber Description: Neoprene Bearing Rubber Pads provide a uniform transfer of load from beam to structure. They permit rotation at the bearing point due to deflection or misalignment. They absorb vibration and prevent sound transfer, while reducing the destructive action of vibration between movable and stationary members. They also provide for movement caused by normal expansion and contraction. Meets Standard Specifications for Highway Bridges, Fourteenth Edition 1989, Division II, Section 25- Elastomeric Bearings, and EN13373-, and AASHTO Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Seventeenth Edition, M251. Neoprene Bearing Pads are used extensively in bridge structures and prestressed and precast concrete buildings. Also used in industrial machinery and heavy equipment applications
Tiles: Dimensions: 120*120*2 cm. Others dimensions according to the customer requirements. Features: - Cow Stall Mat can cover large areas, reduce the damage to the trays floore, relax the animal's muscles - Designed to withstand heavy-duty wear and tear. - Easy to clean and install - Insulates against cold and damp. - Non-slip surface. Physical Specification: - Tensile (N/m2) min. : 4.96 . - Elongation at break(%) min. : 215.45. - Hardness (Shore A): 68.51. - Corrosion (Decrease in Volume) (mm3): 149.96. - Impact ( 50KG from 1 m height): Passed with no change. - Weight (Kg): 36-34 Material: SBR Rubber. Application: Agriculture & Equine, Dairy Farming Colors: Black, Grey, Red, Green, Blue. Rolls: Dimensions: 200*100*1 cm 150*100*1.5 cm 1.4*90*1.5 cm 70*40 cm Material: SBR Rubber Color : Black
Appearance: Extruded black slab rubber sheets Applications: 1. Tire manufacturing and Tire retreading. 2. Car mats. 3. Extruded articles. 4. Rubber Roll and flooring. 5. Tyres 6. Hoses. 7. Shoe sole sheets 8. Conveyer belts and many rubber products. Storage: Store in a cool & dry place below 60�°C away from sources of heat or ignition. Packing: Put on wooden or PVC pallets and covered by plastic film stretched or in PVC bags 25kg. Health & Safety: Detailed advice on the Health & Safety aspects of this product is givin in the individual product Safety data sheet (SDS), available upon request.
Thickness: - (2.8mm, 3mm, 3.5mm, 4mm, etc.) according to the model of car mat. Colors: - Black. - Grey. - Beige Application: Used as flooring inside a car and keep the original car floor from anything Physical Properties: - Hardness (A): 10 �± 60 - Elongation (%): 300 - Tensile: 3.5 MPa Packing: In plastic bags. Material : Natural Rubber & Synthetic Rubber. Keep the original car floor from damage. - Easy to clean, dismantle and install. - The car gives a stylish, atractive and wonderful view. - Five pieces of different shapes, sizes, models and colors. - Made in Egypt with high quality.
Size: - (2-1) mm. - (4-1) mm This rubber is certified by FIFA. - Water resistant, UV resistant and Heat tolerance is 70. - Lightweight and durable. - This rubber is recommended for use in Roofing or Road Flooring. - sport Flooring, - Automotive industry, construction and Geotechnical/Asphalt Applications Material: automotive and truck scrap tire Relative density @ 15 : 02. 0 �± 1.14 gm/cm�³ Color: Black
Description: Rubber Rolls Dimensions: Width: 1000 mm Length: up to 10000 mm Thickness: 3 mm Material: Natural Rubber and SBR
Description: These Rubber Bumpers are made from a hardwearing blend of EPDM and available in various sizes. The rubber buffers protect against harsh impacts, they can be bolted directly to the desired surface using the pre-drilled counter sunk holes. Size:610*210*130mm Color: Black - Black and Yellow Material: EPDM Operating temperature Range: -15C to 70C
1-Black Rubber Bumper Dimensions: 50cm*50cm Description: - It helps align parked cars and control speed in driveways, parking lots, and roads. It Prevents vehicles from pulling through parking spots and keep cars a safe distance from each other in parking lots and keeps speeds low in high-traffic areas. - The size of bolt that use to install it, is 25 mm. - Maximum height: 5cm - 7cm. - It has a place to pass power cables under it and place to put a night reflectors. Applications: It is used to make the speed slow in garage, tourist village, places to wait, schools and club Material: EPDM Rubber Color: BLACK Life Span : 5:10 years - according to how to use it 2- Black and Yellow Rubber Dimensions: 40cm*100cm*5cm. Weight: 18 kg Description: It helps align parked cars and control speed in driveways, parking lots, and roads. It Prevents vehicles from pulling through parking spots and keep cars a safe distance from each other in parking lots and keeps speeds low in high-traffic areas. - The size of bolt that use to install it, is 25 mm. - Maximum height: 5cm - 7cm. - It has a place to pass power cables under it and place to put a night reflectors. Application: - It is used to make the speed slow in garage, tourist village, places to wait, schools and club Material: Natural Rubber & SBR Color: BLACK & Yellow Life span: 5:10 years - according to how to use it
Dimensions: 15 mm *50*50 cm W:4.5 : 4.75 Kg/Tile 10 mm *120*120 cm W: 16:18 Kg/Tile Advantage of this Tile: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Way of installment: - Most cases don't require adhesives as it is heavy tied to Each other in a puzzle way which makes it hard to move away. - If it is needed any rubber adhesive or polyurethane is used on a plain surface Applications: It is used in kidsâ?? areas and schools. Material: SBR Rubber mixed with PU Binder. Color : - Black - Grey - Green - Blue - Red Life span: 5:10 years - according to the use
Dimensions: 15*120*120 mm W: 31: 33 Kg / Tile 20*120*120 mm W: 34:36 Kg / Tile Advantage of this tile: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: - Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Way of installment: - Most cases donâ??t require adhesives as it is heavy tied to Each other in a puzzle way which makes it hard to move away. - If it is needed any rubber adhesive or polyurethane is used on a plain surface Applications: It is used for indoor gym and sport halls as Shock absorbers and safety flooring. Material: SBR Rubber mixed with PU Binder. Color : - Black - Grey - Green - Blue - Red Life span: 5:10 years - according to the use.
Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
- Manufactured from durable EPDM rubber. - High UV & Ozone resistant - Fast & easy installation. - Maintenance Free - Provides a permanent seal for any type of construction - Allows exerting a continuous and uniform force against the joint walls. Applications: - Bridges - Parapets - Cark parks - Buildings - Tunnels - Water treatment plants.
