Find Verified Drilling Machines Tools Suppliers, Manufacturers and Wholesalers

New, efficient and versatile hydraulic drill rig
Rated Drilling Depth
400m
Site Condition
JKS400B Crawler Mounted Versatile Well Drilling Rig is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. 
Product Features
JKS400B Crawler Mounted Versatile Well Drilling Rig is a new efficient and multifunctional drill rig, mainly applicable to the drilling process of well, monitor boreholes and geothermal boreholes. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs.
In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions
Winch can lift stuff upwards of 6m, facilitating installing pipes.
Hydraulic supporters facilitate the rig erection on site without crane. 
 We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory
Dimension (L x W x H) 6800mm x 2250mm x 2650mm
Working Size (W x H) 3250mm x 7500mm
Weight 10.5T
Rated Drilling Depth 400m
Borehole Diameter 105ï½?350mm
Engine Power  92kW
Max. Lifting Force 20T
Small Winch Lifting Force 1.5T
Rotation Torque 9000N.m
Rotation Rate 0ï½?40/80rpm
Feeding Stroke 3800mm
Lifting Speed 0ï½?18m/min
Centralizer Height 0.7m
Grade Ability 15°
Hydraulic Generator (optional) 24kW/380V
Flow of Foam Pump (optional) 20L/min

Hydraulic Drilling Rig Features


JK590C / JK590 are the new generation of diesel (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series.

In contrast with the last generation, they feature lower operation cost and humanized design.

They adopt a 70kW Yuchai diesel engine and hydraulic pump station assembly to generate power to rotate, feed, lift, walk and angle position.

During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 crawler drilling rig consume about 40% to 50% less energy (diesel or electricity), and the air displacement of matched air compressor decreases 30% to 50%.

Compared with JK590, JK590C is additionally equipped with hydraulic dust collection system, and wet type dust collector is optional if water is accessible on site.

JK590C/JK590 are mainly applicable to blast hole drilling process of hydropower construction, open pit mining, quarrying, road construction and national defense construction.





Hydraulic Drilling Rig Technical Parameters






Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Walking speed

2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg




The crawler drilling rigs are widely used in blasthole drilling of mining, hydropower, transportation and defense projects, as well as harbor and channel construction; The hydraulic drilling rigs are specialized in drilling the boreholes of large diameter and depth, for instance, water well drilling and geothermal well drilling.

All In One DTH Automatic Drilling Rig Machine Introduction:
JK650 is an All-In-One DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. JK650 is the integration of drilling rig and air compressor, the design has many advantages like facilitating air compressor transport and management on mining site, retaining more air energy and requiring less manpower. The equipped high-performance hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining.

The high-output Atlas Copco air compressor delivers pressure of 17bar and FAD of 17m³/min. Powerful and reliable, it suits rock formations of various hardness and offers high penetration rate with ease.

All In One DTH Automatic Drilling Rig Machine Parameters:


General Weight kg 10000
Length mm 7863
Width mm 2400
Height mm 3080
Undercarriage Track width mm 300
Ground clearance mm 370
Track oscillation ° ±10°
Walking speed km/h 2 (low) / 3 (high)
Grade ability ° 27°
Engine Model QSC8.3-C260-30
Type Water-cooled six-cylinder EFI diesel engine
Rated power kw/rpm 194/2100
Fuel tank capacity L 400
Air compressor Model Atlas Copco
Working pressure bar 17 (high)
Max. FAD m3/min 17
Rotary motor Rotation rate rpm 0-70
Max. rotation torque Nm 2904
Feeding method Motor-driven planetary gearbox + Chain
Feeding force kN 12
Lifting force kN 18
Feeding stroke mm 4148
Feed extension mm 1200
Drilling depth & diameter Drilling diameter mm Φ90-Φ150
Drilling depth m 50
Pipe length m 3
Pipe diameter mm 76
Dust collector Collecting method Dry tpye hydraulic dust collecting (Optional wet type)


Cheap Drilling Rig Machine For Sale, we guarantee product quality and delivery time!

Well Drilling Equipment Features
JKS300B Well Drilling Equipment is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells.

When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs.

In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions.

Winch can lift stuff upwards of 6m, facilitating installing pipes.

Hydraulic supporters facilitate the rig erection on site without crane.

Smaller size makes it adaptable to various kinds of construction sites.

Well Drilling Equipment Parameters
Rated Drilling Depth 300m
Borehole Diameter 105-350mm
Engine Power 92kW
Maximum Lifting Force 15T
Small Winch Lifting Force 1.5T
Rotation Torque 8500N.m
Rotation Rate 0-40/80rpm
Feeding Stroke 3600mm
Lifting Speed 0-18m/min
Grade Ability 15°
Hydraulic Generator (optional) 24kW/380V
Flow of Foam Pump (optional) 20L/min
Dimension (L x W x H) 6300mm x 2000mm x 2300mm
Working Size (W x H) 3100mm x 6900mm
Weight 8.5T

Crawler Mounted Versatile Well Drilling Rig
hydraulic drill rig, Automatic Crawler Mounted DTH Drill Rig
A new, efficient, and versatile hydraulic percussive well rig
Rated Drilling Depth
500m
Site Condition
It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes.
Product Features
JKS500C Crawler Mounted Versatile Well Drilling Rig is a new, efficient and multifunctional drill rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, grouting holes of cofferdam, dam and reinforced base, as well as long hole drilling of open pit, anchor reinforcement and defense project.
The rig equips with powerful hydraulic motor, heavy-duty hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs. 
We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory
Rated Drilling Depth 500m
Drilling Diameter 105-350mm
Working Air Pressure 1.05-4.5MPa
Air Consumption 16-60m³/min
Drilling Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm
Max. Lifting Force 25T
Axial Pressure ±10T
Lifting Force of Small Winch 1.5T
Lifting Force of Main Winch 4T (optional)
Rotation Torque 9500N.m
Rotation Rate 0-40/80rpm
Feeding Force 3800mm
Lifting Rate 0-18m/min
Grade Ability 15°
Hydraulic Motor 24kW/380V (optional)
Flow of Foam Pump 20L/min (optional)
Dimension (L x W x H) 6800mm x 2250mm x 2650mm

Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills
In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%.
Borehole Diameter
90-165mm
Site Condition
CM358A crawler mounted hydraulic DTHdrilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions.
Product Features
CM358A crawler mounted hydraulic DTHdrilling rig adopts diesel engine (or electric motor)  and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning. 
During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy. 
More information you can views here
We also provide Tophammer Drilling Rigs ,Water Well Drill Rig ,Truck Mounted DTH Drilling Rig

* Weight: 8 kg
* Lenght: 490 mm
* Piston Diameter: 37 mm
* Piston Stroke: 100 mm
* Impact per min: 1625
* Air Consumption: 1,125 m³/min
* Operating Preasure: 6 Bar
* Air Inlet: 19 mm

Mud Cleaner is the second stage and the third stage solids control equipment which is a combination of Desander, Desilter and underflow shaker shaker. Comparing with traditional separate Desander and Desilter, the mud cleaner has a higher cleaning function. The Underflow Screen equals another shaler shaker which receives the waste out from the cyclone nozzle for additional processing. So that mud cleaner could recover more valuable drilling mud. Mud cleaner is the ideal dev

Downhole motor is a kind of downhole power frilling tools by mud. The mud output by the mud pump, will enter the motor through the bypass valve, and a certain pressure difference will be formed at the inlet and outlet of motor, to push the rotor of motor to rotate, and to transfer the torque and the RPM to the drill bit via the universal shaft and the driving shaft.
Drilling downhole motors offer a wide range of configurations to meet different needs. These motors have the power, torque, and speed to drill with the PDC bits for specific downhole conditions or well designs. Using the latest available technology and materials, the motors can be used in an extensive range of drilling applications, such as:
Vertical, directional, and horizontal wells
High temperature

Drill subs are an important integral part of everyday drilling. Not having the right thread adapter can make your life miserable. We have a large inventory of common and not so common sizes. Custom sizes are always available.
Rotary subs have two primary applications. They can be used to cross over from one connection size to another, or as the disposable component used to extend the connection life of a more expensive drill stem member.
Installing a float sub (with check valve) is always a good idea when drilling in wet situations.

Description:
The IBOP is a non-return valve (check valve), also called Gray Valve or BVR, is a back pressure valve used in the drill string to prevent the well from flowing uncontrollably up the drill string. It is used to hold the tool open therefore it is possible to stab the valve while the fluid is flowing through the drill pipe. With the IBOP valve installed in the drill string, it allows you to strip in hole without mud flowing through the drill sting. The IBOP valve should not be used for shut the well in while tripping.

Description:

We supply drilling spools that are in line with API specification 6A. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom and side end connections can be hub end or flanged.

Description:
Overshot is a downhole tool used in fishing operations to engage on the outside surface of a tube or tool. A grapple, or similar slip mechanism, on the overshot grips the fish, allowing application of tensile force and jarring action. If the fish cannot be removed, a release system within the Overshot allows the overshot to be disengaged and retrieved.

Description:
A rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the drill string to facilitate the process of drilling a borehole.

Description:
Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.

Downhole motor is a kind of downhole power frilling tools by mud. The mud output by the mud pump, will enter the motor through the bypass valve, and a certain pressure difference will be formed at the inlet and outlet of motor, to push the rotor of motor to rotate, and to transfer the torque and the RPM to the drill bit via the universal shaft and the driving shaft.
Drilling downhole motors offer a wide range of configurations to meet different needs. These motors have the power, torque, and speed to drill with the PDC bits for specific downhole conditions or well designs. Using the latest available technology and materials, the motors can be used in an extensive range of drilling applications, such as:
Vertical, directional, and horizontal wells
High temperature
Synthetic-, oil-, and water-based mud systems
Performance drilling
Extended-reach well

Description:
A drill bit is a device attached to the end of the drill string that breaks apart, cuts or crushes the rock formations when drilling a wellbore, such as those drilled to extract water, gas, or oil.
The drill bit is hollow and has jets to allow for the expulsion of the drilling fluid, or mud, at high velocity and high pressure to help clean

Drill subs are an important integral part of everyday drilling. Not having the right thread adapter can make your life miserable. We have a large inventory of common and not so common sizes. Custom sizes are always available.
Rotary subs have two primary applications. They can be used to cross over from one connection size to another, or as the disposable component used to extend the connection life of a more expensive drill stem member.
Installing a float sub (with check valve) is always a good idea when drilling in wet situations.

Description:
Lake Petro provide the mud pump accord with API specifications, as per international standard and requirements. Our product offering is extensive used in drilling and fracturing for oil and water well, including: F series, P series, NB series, BW series and

Description:
Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work to