Well suitable for 300 to above psi presser compressos. All the parts are made by the materil of high carbon steel (en-36, 353). Outer diameter of case is 148 mm. Well hardend and tempered to avoid brakage. High penetration is possible in all types of rocks.
Each piece
100kg-- weight
Wooden package
2000 mm length, 180mm outer size of box
I.Characteristics
1.The operation of in and out drill rod doesnt need to change slips, which greatlyreduces workers labor intensity.
2.The body of slips has large contact area with drill rod, high load capacity andmeets the requirements of 7000m drill rod operation.
3.The body of slips has lower operational height and doesnt affect wellheadoperation;
4.The slips match sof zp175, zp205, zp275 and zp375.
5.The slips could hold drill pipes of 3-1/2, 4-1/2, 5 and 5-1/2 .
No packing
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
1.The balanced elliptical shale shaker adoptsbalanced elliptical trajectory which makes the effect of screening and spigotproduct better; it does not appear the phenomenonof accumulated sand in any circumstances, thescreen has a long service life.
2.Electro-hydraulic, manual hydraulic, mechanical and otherscreen box angle adjustment method for selection.
3.Configuration fast tensioned of screen andanti-splash device.
4.Can be designed according to the userrequirements.
I.Characteristics
1.The operation of in and out drill rod doesnt need to change slips, which greatlyreduces workers labor intensity.
2.The body of slips has large contact area with drill rod, high load capacity andmeets the requirements of 7000m drill rod operation.
3.The body of slips has lower operational height and doesnt affect wellheadoperation;
4.The slips match sof zp175, zp205, zp275 and zp375.
5.The slips could hold drill pipes of 3-1/2, 4-1/2, 5 and 5-1/2 .
Following are the technical specifications of 4-station rotary drilling and tapping machine:
1. Work piece: master cylinder
2. Machining area: piston fixing hole.
3. Machining procedures :
Station 1: load and unload
Station 2: center drill
Station 3: drill
Station 4: tapping.
4. Cycle time: 20 seconds/pc
Of the highest performance and price ratio, gl515 is up to a range of 21 meters.
Strong against noise
High depth accuracy
Easy to use
Lower price
Excellent service
Gl-system-515 receiver
System freq :30khz
Batteries :6 c-cell off shelf batteries/rechargeable battery
Batteries life :18/10 hours continuous operation
Display :industrial rated lcd graphic display
Telemetry :5 channels of license free radio. Range up to 600m
Temperature :under 85 centigrades
Dimensions :30cm x 13cm x 67cm
Weight :2 kg
Water proof :ip65
Gl-system-515 display
Power :6 c-cell off shelf batteries or 12-32 vdc of a hdd
Batteries life :18 hours continuous operation with 6 c-cell batteries
Display :industrial rated lcd graphic display
Telemetry :5 channels of license free radio with range up to 600m
Temperature :under 85 centigrades
Dimensions :14cm x 13cm x 13cm
Weight :1kg
Water proof :ip65
Gl-system-515 transmitter
Transmitting freq :30khz
Batteries :2 c-cell off shelf batteries.
Batteries life :12 hours continuous operation
Range :up to 21 meters depth
Roll :12 oÆclock segment
Pitch :0.1% resolution
Temperature :under 85 centigrades
Weight :0.68kg
Dimensions :standard
Water proof :ip67
The first wireless locator of the world to offer range up to 28 meters with strong against noise and high accuracy. ItÆs easy to use with lower price and good service .
Gl-system-700 receiver
System freq :30khz/12khz/1khz
Batteries :6 c-cell off shelf batteries/rechargeable battery
Battery life :18/10 hours continuous operation
Display :industrial rated lcd graphic display
Telemetry :5 channels of license free radio. Range up to 600m
Dimensions :28cmx33cmx76cm
Water proof :ip65
Gl-system-700 display
Power :6 c-cell off shelf batteries
Battery life :18 hours continuous operation with 6 c-cell batteries
Display :industrial rated lcd graphic display
Telemetry :5 channels of license free radio with range up to 600m
Dimensions :18cmx14cmx22cm
Water proof :ip65
Gl-system-700 transmitter
Transmitting freq :30khz/12khz/1khz
Batteries :2 c-cell off shelf batteries.
Battery life :13 hours continuous operation.
Range :up to 28 meters depth.
Roll :1-12 clock position with half hour resolution.
Pitch :0.1% resolution.
Temperature :under 85 centigrades
Weight :0.68 kg
Dimensions :standard
Water proof :ip67
Of the highest performance and price ratio, gl300 is up to a range of 18 meters.
Strong against noise
High depth accuracy
Easy to use
Lower price
Excellent service
Gl-system-300 receiver
System freq :30khz
Batteries :6 c-cell off shelf batteries/rechargeable battery
Batteries life :18/10 hours continuous operation.
Display :industrial rated lcd graphic display
Telemetry :5 channels of license free radio. Range up to 600m
Dimensions :30cmx13cmx67cm
Water proof :ip65
Gl-system-300 display
Power :6 c-cell off shelf batteries or 12-32 vdc of a hdd
Batteries life :18 hours continuous operation with 6 c-cell batteries
Display :industrial rated lcd graphic display
Telemetry :5 channels of license free radio with range up to 600m
Dimensions :14cmx13cmx13cm
Water proof :ip65
Gl-system-300 transmitter
Transmitting freq :30khz
Batteries :2 c-cell off shelf batteries.
Batteries life :12 hours continuous operation
Range :up to 18 meters depth
Roll :12 oÆclock segment
Pitch :0.1% resolution
Temperature :under 85 centigrades
Weight :0.68kg
Dimensions :standard
Water proof :ip67
Strong against noise
High depth accuracy
Easy to use
Low price
Good service
Ningbo golden land electronics inc. Strives to provide high performance, easy to use locator systems at a low competitive price, while providing great service to its customers. With advanced technologies in its hdd drill head locating systems, ningbo golden land electronics inc. Offers state of the art locator systems that are the definition of precision and accuracy.
Packing in plastic cases;
Weight:5 kg
Dimensions:22 cm 45 cm 85 cm
We supply the good quality oil drilling rig, he brief introduction as follows:
Oil drilling rig can be used in exploration and exploitation of oil and gas well.We can supply the :zj20/1350j, zj30/1700j, zj40/2250j and zj40/2250ldb, zj40/2250db and aj40/2250dz, zj50/3150j and zj50/3150ldb, zj50/3150db and zj50/3150dz, aj70/4500ldb and zj70/4500db, etc...
Welcome to visit our website. Any question, please feel free to contact us.We will response you promptly. We are there waiting for negotiating with you and quote you our best price.
We specially manufacture precision carbide tools, also nail drill bits like the tools listed on your website. Our naildrill bits are made on cnc machine tools, and fine grain sizes carbide material is selected. We can make very fine nail drill bits, with 16; 20; 25; 32; 36; 60;80teeth, and also 100 teeth for special purposes. The bits are with gold plated, less friction, less heat created, and less vibration.And the can used right-left two ways cutting.Our bits shank sizes can be 1/8í¦ or 3/32
We are a trading co.And we were founde in1992.Our main products are element milling cutter that is our own brand .What's more , we also sell the fraisa drills and milling cutter. The gapanese big shank and so on
Block stone splitter easily splits big blocks into smaller ones that can be sub-splitted into cubes or kerbstone with the sizes demanded, it's simply operated and maintained.
Here goes technical parameter:
Outside size(cm) 450x220x320
Self weight(t) 4.6
General power(kw) 13.2
Voltage(v) 380
Frequency(hz) 50
Flow rate(l) 120
Hydraulic pressure(t) 200
Maxximum trip(cm) 60x120
Minimum trip(cm) 20x120
Spindle travel 45mm
Spindle speed 50hz 420 760 1340
60hz 500 900 1600
Swing 360mm
Vp-down travel of the head 280mm
Column diameter °52mm
Diameter of working surface 260*240mm
Base diameter 340*500mm
Distance of spindle to base 380mm
Motor hp 1hp
Overal height 930mm
Weight 150kg
Specification t-50a
Max. Drilling capacity m10
Spindie taper jt2
Spindle travel 45mm
Spindle speed 50hz 420 760 1340
60hz 500 900 1600
Swing 360mm
Column diameter °80mm
Table diameter °320mm
Base diameter 330*510mm
Max.Distance of spindle to table 350mm
Distance of spindle to pase 600mm
Motor hp 1hp
Overal height 1100mm
Weight 200kg
Specification t-50b
Max. Tapping capacity m10
Spindie taper jt2
Spindle travel 45mm
Spindle speed 50hz 420 760 1340
60hz 500 900 1600
Swing 360mm
Vp-down travel of the head 280mm
Table diameter 650*800*760mm
Column diameter °52mm
Max.Distance of spindle to table 380mm
Motor hp 1hp
Overal height 1720mm
Weight 230kg
Specification t-80a
Max. Drilling capacity m16
Spindie taper mt2
Spindle travel 65mm
Spindle speed 155 285 515
190 340 620
Swing 460mm
Column diameter °102mm
Table diameter °420mm
Base diameter 390*580mm
Max.Distance of spindle to table 530mm
Distance of spindle to base 840mm
Motor hp 2hp
Overal height 1500mm
Weight 370 kg
Product features
The rovolving speed is changeable during the machine is being operated. The gears are safe absolutely.
The total maximum height is 570m/m. Design of motor and gear box makes the point gravity center become only 280m/m. As the center of gravity is quite low and hard to be fallen, the magentic foundation can attain its function and efficiency.
The distributor disc is located on the top of machine which prevent it from being fallen or destroyed.
Mtm-930a & mtm-922a with six-step speed variable (max. Revolving speed: 756min revoling speed:51) depends on the hardness of processed objects and size of hole which makes the operator more comfortable to select the revolving speed.
