Orchid Energy could supply slick type drill collar, spiral drill collar and Non-magnetic drill collar (NMDC).
Orchid Energy can provide three types of Non Magnetic Drill Collar: Non Magnetic Slick Drill Collar, Non Magnetic Spiral Drill Collar, Non Magnetic Flex Drill Collar, Pony Collar.(P530,P550 material etc)
Non Magnetic Drill Collar (NMDC) are made from low-carbon stainless steel as API specification and implementation of SY/T5144 standard, which can be cold thread rolling, machine special double shoulder thread and do as other specifications request. Non Magnetic Drill Collar are as a housing for MWD tools and also could provide weight for drill string.
Test and Inspection carried out on each bar: Chemical Composition, Tensile Test, Impact Test, Hardness Test, Metallographic Test, Corrosion Test, Ultrasonic Test over the whole length of the bar, Relative magnetic permeability Test, Hot spot Test, Dimensional Inspection.
Slick/Spiral Drill collar is produced by AISI 4145H modified quenched and tempered steel as API specification and implementation of SY / T5144 standard, which can be cold thread rolling, copper or phosphate processing, machine special double shoulder thread and other specifications.
Slick/Spiral Drill collarFeatures & Benefits:
Pressed steel thread protectors are supplied for drill collar;
Stress relief groove & bore back Box applied if needed;
Hardbanding material ARNCO 100XT,ARNCO 300XT,TCS8000 applied if needed;
Slip and elevator recess are machined in accordance with API7-1;
The Universal Bottom Hole Orientation (UBHO) Sub is used in a directional drilling BHA, and it is manufactured from high quality AISI 4145-modified fully heat-treated alloy steel or non-magnetic material like P530, P550 to provide a non-magnetic environment for drill string.
The UBHO sub is often referred to as a mule shoe sub. This tool is typically run directly below a drill collar and contains a landing sleeve for directional survey equipment. The UBHO is designed and used to establish the â??high side of the toolâ??, which is essential for knowing the tools orientation in the wellbore.
UBHO also stands for:
Universal Bent Sub Orientation;
Universal Bottom Hole Orientation;
Universal Bore Hole Orientation;
Various OD sizes are available to meet specific directional drilling applications.
LT overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals, the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe.
The releasing and circulating overshot can also work with jars to catch the stuck fishes. If the catched fish canâ??t be release from stucking ,we could release the overshot and lifting the drill string.
Overshot consists of three outside parts: top sub, bowl, and standard guide. The basic overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the overshot, a spiral grapple, spiral grapple control, and type â??Aâ?? packer are used. If the fish diameter is considerably below maximum catch size (�½â?? or more) a basket grapple and a mill control packer are used.
Orchid Energy drilling motors, also known as mud motors, have established a reputation for performance, reliability and excellent service. We provide a versatile range size and types of motors for directional, horizontal, straight drilling, performance drilling, coil tubing and HDD drilling conditions.
Drilling motors are the key component of bottom hole assembly(BHA), providing efficient and precise drilling operations. These high-performance motors, generate rotational force to drive the drill bit. With advanced technology and superior design, drilling motors offer enhanced torque, speed, and reliability.
Drilling motor is a positive displacement motor(PDM). The high drilling fluid enters into the motor converting high fluid power to mechanical energy and the rotor drives the shaft and bit rotating. We can produce drilling motors for hole size from 1 7/8â?? to 26". We also can design and manufacture according to customers' special requirements.
Classification
1) Bent Housing Motor
We can provide fixed bend motor, single bend motor, double bend motor and adjustable bend housing motors.(adjustable angle from 0-3�°) which can meet different kickoff requirement.
2) High Temperature Motor
Drilling motor Temp. range are â?¤120â??,120-150â?? and 150-175â??which can meet different well running condition even in very harshest environment.
3) Hollow Rotor Motor
To increase hydraulic horsepower and upward speed of mud stream, rotor is manufactured into hollow rotor with nozzles. Thus, motor total flow rate is equal to the sum of the flow rate through seal cavity and rotor.
4) Even Wall Motor
Even wall motor not only enhances the impact resistance and deformation resistance of the rubber on the inner surface of the stator housing, but also the rubber will not cause problems such as rubber aging and rubber drop during the vulcanization process, so that the rubber vulcanization effect can be achieved better to ensure the service life of drilling motor. Under the same pressure drop, the size of the motor can be shortened and mud motor kick off rate can be further improved.
5) Rotor Coating Technology
Regular chrome coating could be adopted as clients requirement. Also we can do Tungsten carbide coating on rotor surface which can enable the rotor to work normally in saturated saltwater mud and to prevent the corrosion of chrome plated rotor in saturated saltwater.
Benefits & Features
All drilling Motors are equipped with a rotor catch sub;
Drilling Motors can be equipped with float top sub or dump sub or special catch sub;
Drilling motor can be used in WBM(water based mud)&OBM(oil based mud);
Equipped with 0 â?? 3�° Adjustable Housings;
Screw on Stabilizer's available or fixed Stabilizer or blank stabilizer;
Stronger bearing mandrel for use with high torque power sections;
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
Hydraulic Mechanical Drilling Jar is integrate hydraulic principle with mechanical principle and applies to all kinds of drilling operations and be used through combining with drilling tools. This jar is equipped with a mechanical safety latch and mechanical latch for jarring downwards.
When the downhole tools get struck, the hydraulic mechanical drilling jar can generate upward jarring or downward jarring through lifting and landing drilling strings, and release block and stuck by several times jarring to recover normal drilling operation promptly. Avoiding resistance and stuck which may cause further accident and caused greater economic loss. If releasing force is failed, it can dynamically adjust at any time on sites.
Hydraulic jar is one of the drilling jars types used in drilling operations to free stuck pipe problem.
Orchid Energy hydraulic drilling jar will allow the operator to apply variable impact in both the up and down directions. It can protect the drill string effectively and improve the using life. The hydraulic stored energy mechanism has the advantage of reliable property and good stability. The scope of time delay interval can be 30s 240s; the scope of service temperature can be -40 180. It can adopt the new special material for higher property and safety. It can normally used for drilling, coring, work over and fishing etc.
Drilling pump is also called mud pump which transport high pressure, high specific gravity, high sand concentration drilling fluid to bottom of hole. Drilling fluid is used to cool bit, wash out bottom of hole, break rock and bring out debris. Drilling pump not only is indispensable and one of the most important processing equipments, but also is one of the three working machines of drilling rig.
Main Features:
Products have been verified by API Q1 Quality System, comply with API Spec 7K and all the parts can be traced back?
Strong self-suction ability. No need to use feed pump in normal case�?�¯ï¿½?�¼?
Reasonable structure. Operating steadily and reliably�?�¯ï¿½?�¼?
Valve pot, crankshaft, herringbone gear and other important parts are manufactured by high quality alloy steel. Herringbone gears adopt grinding process, which make the precision of gears higher?
Parts have high standardization degree, strong interchangeability, and fewer types of spare parts�?�¯ï¿½?�¼?
Advanced inspecting methods: three-coordinates measuring machine etc?
Good low temperature-resistant performance. It will be in normal use below 45 degree
Good anti corrosion performance. Available to use in high salinity coastal and marine environment?
Application of drilling pump remote information system can monitor and control remotely the running state of equipments on site in real time and reflect the working state of drilling pump completely, and realize the intercommunication among the equipment, control center and personnel, so as to make technical personnel and management personnel in any place can get date of every monitoring point, and respond in a timely manner
We provide Automotive Gasoline Engine Trainers, Automotive Gasoline Engine Trainers, Automotive Trainers, Automotive Training Equipment, automotive training equipment with great production line and offer fast delivery, professional team, effiective function, friendly service,...
Displays the basic principles and structures of electronically controlled gasoline engine, and simulates its operation. ï?§This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc....
Battery Operated Rail Drill Machine, which drill hole in railway track.
Approximate drilling time : within 40 - 60 sec. (depending on rail size)
Light weight : 19kg with battery, provided with carry case.
Battery life : 75 to 100 holes depending on drill size
Suitable for 16 - 40 mm hole
Indian Railway / RDSO approved product.
We are Exporters and suppliers for all New Epiroc Crawler Drills / Atlas Copco Compressors / Sany / Hyundai Excavators / Dynapac Compactors & Pavers and related Spares parts.
We Agrawal Export Industries are a Private Limited Company based firm, engaged as the foremost Manufacturer, Exporter and Supplier of Plastic Spools Cylindrical, Tapered Barrel, Abs Flanges, Polypropylene, Dispatchable Polypropylene etc. Our products are high in demand due to their premium quality and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.
P.F.K. 250/3G - Pantograph Milling And Drilling Machine
With the help of a template on PVC and aluminum profiles, it opens the lock place, the lever place via the gearbox, and the water discharge channels with the 3rd unit. It has a full electropneumatic system. It is double angled. Copy head on the vertical axis, triple drilling on the horizontal axis, and water discharge device at 45 degrees.
PFK 250/3 G creates the locking area with the help of a template on PVC and aluminum profiles, and makes the lever place via the gearbox, and creates the water discharge channels with its 3rd unit
Full electro-pneumatic system
PFK 250/3 G is double-angled. Copy head on the vertical axis, triple drilling on the horizontal axis, and water discharge device at 45 degrees
Makes all copy operations with the universal template
Pierces the profile with triple drilling device.
Low energy and air consumption
Opens water discharge channels on PVC profiles at different angles
Full automatic working system
Technicial Specifications
Voltage
220 -380 V
Frequency
50-60 Hz
Total power
1,5 Kw
Air pressure
6 Bar
Air Consumption
10 lt/min
Dimensions (mm)
830 x 610 x 1270
Weight (Kg)
160
Automobile hydraulic lift is designed to lift people with tools and materials to a height of up to 26 meters when performing utility, repair and installation work at industrial, civil and agricultural facilities, as well as for servicing electrical installations.
M assembly boom hoist.
The lift moves to the work site independently, like an ordinary road vehicle.
Compact Pneumatic Feeder
Max width in mm Max stroke Length in mm Max strip Thickness mm Max strokes Per minute Pressure of fix Clamps kg. Pressure of Mobile Clamps kg. Traction force Kg. Total Consumption CC/Stroke Weight Kg.
100 100 4 110 126 757 120 2.5 39
200 200 3.2 60 128 757 120 4.8 57
300 300 2.5 48 126 757 120 6.8 76
400 400 1.5 30 127 757 120 10
Product Details:
Automation Grade Automatic
Design All options
Warranty 1 year Warranty
Brand Sarthak Enterprises
Max Stroke Length 350MM
Max Width 50-500 MM
Material Aluminium Body
Our company is the largest producer of the decanter centrifuge in China!
Sludge Decanter Centrifuges Features:
1. Designed with compact structure and pleasant appearance
2. With large processing volume and above 98% solid capture rate
3. Automatic control, which enables low operation intensity and reliable operation
4. With small space occupation, consecutive work and low noise level
LW Horizontal Decanter Centrifuges feature continuous feeding and discharge . This chemical separation equipment has been applied two-phase(solid-liquid) and three-phase(solid-liquid-liquid) slurries separation industry of chemicals, pharmaceutical, environment protection, as well as mining and food, etc.
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
