1.The features of XYD-130 crawler hydraulic core drilling rig
The drilling rig adopts the automatic Telescopic style with two high strength oil cylinder support, a set of hydraulic valve control rigs operating supine, which is time-saving, safe and reliable to maximize the benefits for users.
The chassis adopts rubber track, light weight and low life cycle cost, which can reduce noise of vehicle running mechanism, reduce car body vibration, and reduce fuel consumption greatly. It can walk on urban roads without hurting the road surface.
The chassis is equipped with four high strength threaded legs (or hydraulic high leg). The installation and adjustment is fast and convenient. It can be used for leveling of work plane, loading and unloading vehicle, which reduces the hoisting cost and improves efficiency and works as auxiliary support.
The drilling rig uses 48V electricty to start the diesel engine , which greatly reduces the labor usage, especially in the cold season. When the diesel engine has difficulty activiting, this starting mode shows greater advantages.
2.Technical parameters of XYD-130 crawler hydraulic core drilling rig
XYD-130 crawler hydraulic core drilling rig
Drilling depth 130m
Maximum opening diameter 220mm
Diameter of the end hole 75mm
Drilling rod caliber 50mm
Drilling angle 90°-75°
Drill weight (no include power) 2600kg
Spindle
Spindle speed 142/285/570 r/min
Spindle stroke 450mm
Windlass
Max single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64 m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 27m
Mud pump
Type horizontal single urn twin-action
Displacement 95 /77L/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
1.Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
1.Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
1. Characteristics of XYD-200 crawler hydraulic core drilling rig
·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement.
·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
2. Technical parameters of XYD-200 crawler hydraulic core drilling rig
XYD-200 crawler hydraulic core drilling rig
Drilling depth 200m
Maximum opening diameter 75-300mm
Final hole diameter 75mm
Kelly 53/59*4200mm
Drill pipe diameter 50/60mm
Drilling angle 90°-75°
Auxiliary power diesel engine 16.2kw 2200r/min
Structural weight/Size 3000kg 3800*1950*2700
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Windlass
Single rope lifting force 24kn
Single rope lifting speed 0.12/0.22/0.49/0.95m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 35m
Derrick
Rated load 5t
Effective height 6m
Tower leg specification 89mm
1. Characteristics of XYC-200 vehicle-mounted hydraulic core drilling rig
·XYC-200 is a multi-function vehicle-mounted hydraulic core drilling rig.Automobile chassis chassis, transmission system and rig winch, mud pump and other important accessories installed in the chassis. the layout is reasonable, compact, and easy to operate.
·It is equipped with high pressure,big flow BW160 mud pump,which can ensure drilling depth and diameter.
·the rig has shifting device, it can move on the vehicle and is convenient to operate while drilling.
·the hydraulic folding mast is safe and convenient to transport
2.Applications of XYC-200 vehicle-mounted hydraulic core drilling rig
·road and high-rise building foundation exploration
·all kinds of concrete structure inspection holes
·river embankments
·subgrade grouting holes
·drilling and direct grouting
·civil water well
·ground temperature central air conditioners.
3. Parameters of XYC-200 vehicle-mounted hydraulic core drilling rig
XYC-200 vehicle-mounted hydraulic core drilling rig
Drilling depth(m) 30-200
Drilling diameter(mm) 300-75
Drilling angel(mm) 90-75
Spindle rotating speed(r/min) 64/128/287/557
Spindle stroke(mm) 450
Main hoisting capacity
(single line)(Kg) 1600
Main hoisting line capacity
(m) 35
Hoisting speed(r/s) 17/35/75/151
Wireline diameter(mm) 12.5
Mast height(mm) 7000
Mast effective height(mm) 6500
Kelly/active pipe(mm) 59*53
Drill rod(mm) 42/50/60
Drill rig weight(kg) 1150
Power unit Model ZS1115 diesel engine
Rated power 14.7kw/2200rpm
BW-160 mud pump Rated flow(l/min) 160
Rated pressure(mpa) 1.3
Driving power(kw) 5.15
Main machine weight
(kg) 190
Dimension(mm) 1110*725*965
Chassis light truck(Pictures of vehicle-mounted drilling rigs for reference only)
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
1. Characteristics of XYC-200A tricycle-mounted hydraulic core drilling rig
·XYC-200A tricycle-mounted hydraulic core drilling rig is multi-function hydraulic vehicle-mounted core drilling machine .
·The tricycle is Tricar. The drilling rig, engine, BW-160 pump and hydraulic drill tower are all installed on the tricycle, so it us easy for transportation.
·XYC-200A tricycle-mounted hydraulic core drilling rig with BW160 pump which has high pressure and high flux, to ensure the drilling depth and hole diameter.
·The tricycle drilling rig is equipped with shift unit,so the drilling rig can move back and forth
·The highest speed can reach 1045r/min with 5 gears, which improves the drilling efficiency
·The drilling rig is Adopted 53*59 drilling rod, which has high rigidity and strong delivery torque
·Equipped with taper clutch, made the machine easy to operate and free of maintenance.
·Use large module planetary gear and add supporting frame, highly increased hoisting and braking ability of the winch.
·Vertical spindle are fixed by four groups of bearings to ensure that the core rig is rigid enough for gravel layer and other complex geological conditions.
2. Parameters of XYC-200A tricycle-mounted hydraulic core drilling rig
Drilling depth 200m
Max. open hole diameter 75-260mm
End hole diameter(mm) 75
Drill rod diameter 50mm
Drilling tower height 6500mm
Drilling angle 90-75
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. single line hoisting capacity 1600kg
Single line lifting speed 17/35/75/151r/min
Tightrope diameter 12.5mm
Tightrope cubic measure 35mm
Hug floodgate belt width 70mm
Mud Pump
Type Horizontal Single Urn Twin-action
Discharge displacement 170l/min.
Diesel S1115 22HP
Electric motor 15kw,1440r/min
Max. pressure 1.5mpa
Work pressure 0.7mpa
Water inlet diameter 30mm
Water outlet diameter 25mm
Triangle conveyre belt B1728mm
Chassis
Chassis Tricar(Pictures of vehicle-mounted drilling rigs for reference only)
1.Features of XY-130 hydraulic core drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
2.Specifications of XY-130 hydraulic core drilling rig
XY-130 hydraulic core drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90
Drill weight (Not include power) 600kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
1. Applications of XY-180 hydraulic core drilling rig
The XY-180 hydraulic core drilling rig is designed on the basis of the XY-1A hydraulic core drilling rig. It is a low speed and high torque portable drilling machine with oil pressure.
This drill rig is suitable for engineering geological survey of railway, hydropower, traffic, bridge, dam foundation and other buildings, geological core drilling and physical investigation, drilling holes for small holes and blasting holes, a small water well drilled.
3.Parameters of XY-180 hydraulic core drilling rig
Drilling depthm 180/150/120/90/70/30
Borehole diametermm 75/91/110/130/150/300
Maximum opening diametermm 375
Drill pipe diametermm 42/50
Spindle speed (r/min) 71/142/310/620
Spindle strokemm 450
Upgrading ability (KN) 15
Diameter of steel wiremm 12
Type gear pump
Model YBC-12/80
Rated pressure (MPa) 8
Rated speed (r/m) 1500
Displacementml/r 8
Power supply ZS1115 diesel engine and 15kw motor
1. Features of XY-3 hydraulic core drilling rig
·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application
·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient
·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident.
·Equipped with normally closed hydraulic chuck, operation is flexible and reliable
·The independent operation of the vertical shaft and the hoist can be realized
·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod
2. Parameters of XY-3 hydraulic core drilling rig
XY-3 hydraulic core drilling rig
Drilling depth 600m
Borehole diameter 300-75mm
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60
Drilling angle 90°-65°
Spindle
spindle speed 30-1050r/min
Spindle stroke 29-137r/min
Spindle stroke 60mm
Spindle inner diameter 96mm
Lifting capacity 6000kg
Hoist
Max.single line lifting speed 0.5-1.9m/s
Wire rope caliber 12.5mm
Max.single line lifting capacity 4000kg
Reel diameter 300mm
Wire rope length 50m
Maximum lifting capacity of single rope 3000kg
Mud pump
Type Horizontal three cylinder BW-250
Displacement 250l/min
Work pressure 80kg/cm²
Water inlet pipe diameter 75mm
Water outlet pipe diameter 50mm
Gear oil pump
Duplex gear oil pump CBF-F63/25
Front displacement, pressure 63l/min 20mpa
Water outlet pipe diameter 25l/min 20mpa
Power
Diesel engine 39kw
Electric machinery 22kw
Weight size
Drill weight 1800kg
Shape size 2500*900*1800mm
1. Characteristics of XYX-3 wheeled hydraulic core drilling rig
·The drilling rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig.
·Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable.
·With oil pressure feeding mechanism to improve drilling efficiency
·The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole.
·The lifting and falling tower is hydraulic operation, which is convenient and reliable.
·The diesel engine uses electric start to reduce the labor intensity of the worker.
2. Parameters of XYX-3 wheeled hydraulic core drilling rig
Drilling depth 100/ 250 / 300/ 600 m
Maximum opening diameter 300 / 200 /150 / 75mm
Max open hole caliber 300mm
Final hole diameter 75mm
Drill pipe 60mm
Borehole inclination 90°-65°
A vertical scroll of painting
Vertical rotation speed of vertical axis 30-1050r/min
Vertical reversal speed 29-137r/min
Vertical axis stroke 560mm
Diameter of shaft inner hole 96mm
Vertical axis lifting capacity 60kn
Main hoist (hydraulic drive)
Single rope lifting speed 0-45m/min
Wire rope diameter 14mm
Band width 90mm
Drum diameter 300mm
Reel capacity 30m
Maximum lifting capacity of single rope 40kn
Auxiliary hoist (hydraulic drive)
Drum diameter 140mm
Diameter of steel wire 6mm
Reel capacity 450m
Mud pump
Mud pump BW-250 Horizontal three cylinder
Flow 250 l/min
Working pressure 7mpa
Inlet diameter 75mm
Outlet diameter 50mm
Gear oil pump
Double oil pump CBF-F63/25
Front-end flow pressure 63 l/min 20mpa
Backend flow pressure 25 l/min 20mpa
Rig power
Diesel engine FAW Xichai 4 cylinder
Electric machinery Y180L-4 22KW
Wheeled chassis
Bearing capacity of wheel chassis 3.5t
Wheel chassis length 2.6m
Wheel chassis width 2m
Wheel chassis height 0.6m
1. Characteristics of XYD-3 crawler hydraulic core drilling rig
XYD-3 crawler hydraulic core drilling rig is mainly used for geological general investigation and exploration,road and tall building foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,ect.
·The drilling rig is equipped with crawler chassis device, which is easy to move with fast speed.
·The crawler device is made of resistant steel mill.
·Hydraulic oil pressure feed device, which improves drilling efficiency.
·Pressure gauge displays the condition of the bottom of the drill hole.
·Drill mast controlled by hydraulic cyliner so it improves the efficiency.
·Diesel engine adopts the electric starter to reduce the labor usage.
2. Parameters of XYD-3 crawler hydraulic core drilling rig
Drilling depth 600m
Max. open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90°-75°
Spindle
Spindle forward speed 30-1050r/min
Spindle reverse speed 29-137r/min
Spindle stroke 600mm
Spindle inner diameter 96mm
Main Winch
Single line lifting speed 0.5/0.9/1.4/1.9m/s
Diameter of wire rope 12.5mm
Brake width 90mm
Drum diameter 300mm
The biggest single rope hoisting capacity 30kn
Mud pump
Type Horizontal triples BW-250 Mud Pump
Displacement 250 l/min
Water inlet diameter 75mm
Water outlet diameter 50mm
Power
Diesel engine 38kw
Electric motor Y180L4 22KW
Weight 6500kg
Size 2500*900*1800mm
1.Features of XYC-3 vehicle-mounted hydraulic core drilling rig
XYC-3 is a vehicle-mounted hydraulic core drilling rig.The drilling rig transmission system and hoist, mud pump and other important accessories are all installed on the chassis. The layout is reasonable and compact. And the operation is simple.
The drilling rig is equipped with high pressure and large flow BW-250 pump, which ensures the drilling depth and borehole diameter.
2. Applications of XYC-3 vehicle-mounted hydraulic core drilling rig
·geological survey and exploration
·road and high-rise building foundation exploration
·all kinds of concrete structure inspection holes
·river embankments
·subgrade grouting holes
·drilling and direct grouting
·civil use water wells
·ground temperature central air conditioners
3. Parameters of XYC-3 vehicle-mounted hydraulic core drilling rig
XYC-3 vehicle-mounted hydraulic core drilling rig
Drilling depth 30-600
Drill hole diameter 300-75
Diameter of the end hole 75
Drill angle 90-75
Spindle forward core speed 30-1050
Spindle reverse core speed 29-137
Spindle stroke 600
Main winch lifting force
(with single line) 3000
Main winch rope capacity 65
Lifting speed 0.3-1.9
Rope diameter 12.5
Drill mast height 7000
Drill effective height 6500
Driving drilling rod 59*53ã??70*63ã??79*89
Drilling rod diameter 42/50/60
Weight 3500
Engine Model:Yunnei YN27
1. Characteristics of XYX-44A wheeled hydraulic core drilling rig
XY-44A wheeled hydrulic core drilling rig is a multi-purpose spindle diamond core drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster core drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XYX-44A wheeled hydraulic core drilling rig
·Core drilling rig
·Engineering geology exploration,
·Hydrology and core drilling
·Large diameter foundation piles construction
3. Parameters of XYX-44A wheeled hydraulic core drilling rig
XYX-44A wheeled hydraulic core drilling rig
Drilling depth 600-1400m
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
Spindle
1. Characteristics of XYD-44A crawler hydraulic core drilling rig
XYD-44A crawler hydraulic core drilling rig is a multi-purpose spindle well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XYD-44A crawler hydraulic core drilling rig
·Hydraulic core drilling rig ,
·engineering well drilling ,
·hydrology and water well drilling
·large diameter foundation piles construction
3. Parameters of XYD-44A crawler hydraulic core drilling rig
XYD-44A crawler hydraulic core drilling rig
Drilling depth 600-1400m
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
Spindle
1.Brief introductions of BXZ-2 backpack core drilling rig
BXZ-2 backpack core drilling rig is a revolutionary portable geological core drilling rig that is made in China. If you want to buy a backpack drilling rig with big horse power, please identify "HuaxiaMaster" backpack drill. This portable rig is specifically for mineral investigation, oil exploration, geological research and exploration. We have ten years experience of producing core drilling rig. Shandong Master Machinery Group Co.,Ltd believes that the backpack drilling rig will give you great satisfactions and get your work done perfectly.
2.Applications of BXZ-2 backpack core drilling rig
·mineral prospecting
·geotechnical engineering
·geoscientific research
·tunnel lining
·inflected arch detection
·highway engineering geological exploration
·hydraulic engineering geological exploratory
·oil exploration
·lode prospect
3.Features of BXZ-2 backpack core drilling rig
·compact & portable
·simple to operate
·easy to assemble and disassemble
·convenient to move
·ideal choice to work in remote location
4.Configuration list of BXZ-2 backpack core drilling rig
Item Parameter Unit Quantity
Drilling rig engine Kohler 7.75HP set 1
Drill pipe 33*700mm pc. 28
Drill pipe joint 33*100mm pc 28
Core barrel 33*600mm pc 1
Reducing nipple pc 1
Alloy bit 33mm pc 1
Composite bit 33mm pc 1
Diamond bit 33mm pc 1
Manual mud pump set 1
Mud pump ( gasoline engine) high pressure platform 1
Maintenance kit gasoline slurry pump set 1
Inlet hose pipe set 1
Inflow water filter pc 1
Outlet hose pipe set 1
Safety plate pc 1
Safety clamp pc 1
Pipe wrench pc 1
Specialized backpack pc 1
1. Applications of HZ-130Y hydraulic core drilling rig
·geological survey and exploration
·basic exploration for roads
·high-rise buildings
·inspection holes for various concrete structures
·river embankments
·grouting holes
·direct grouting,
·civil water well
·ground temperature central air conditioners.
2.Features of HZ-130Y hydraulic core drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This machine adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
3.Technical parameters of HZ-130Y hydraulic core drilling rig
HZ-130Y hydraulic core drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90-75°
Drill weight (Not include power) 750kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
1.Brief introductions of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage.
2.Applications of HZ-130YY hydraulic core drilling rig
·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes.
·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite.
·2-9 grades of sandy clay and rock.
3.Features of HZ-130YY hydraulic core drilling rig
·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers.
·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable.
·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact
·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on.
This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance.
4.Technical parameters of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig
Drill hole depth 130m
Maximum opening diameter 75-220mm
Final hole diameter 75mm
Take the initiative to drill pipe 53/59*4200mm
Drill pipe diameter 50mm
Borehole inclination 90°-75°
Power(diesel engine) 13.2kw 2200r/min
Size 850kg/2400*950*1400
Vertical shaft
Vertical spindle speed 142/285/570r/min
Vertical stroke 450mm
Hoist
Single rope lift 9.6kn
Single rope winding speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Diameter of wire rope 9.3mm
Wire rope capacity 27m
Derrick
Rated load 2t
Effective height 6m
Towerleg specifications 73mm
Mud pump
Model BW95
Flow 95l/min
Maximum pressure 1.2mpa
Reciprocating frequency 93r/min
Suction pipe diameter 51mm*4.5m
Diameter of high pressure pipe 32mm*6m
1. Applications of XYX-130 wheeled hydraulic core drilling rig
Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners.
2.Features of XYX-130 wheeled hydraulic core drilling rig
The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move.
Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency.
The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable.
The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process.
3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig
XYX-130 wheeled hydraulic core drilling rig
Drilling depth 130m
Max open hole caliber 220mm
End hole caliber 75mm
Drilling rod diameter 50mm
Drilling angle 90°-75°
Drill weight 950kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Windlass
Maximum lifting weight of single rope 1600kg
Single rope lifting speed 0.41 0.82 1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 27m
Mud pump
Type Horizontal single cylinder double action
Displacement diesel engine / motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Drilling depth 130m
Max open hole caliber 220mm
End hole caliber 75mm
1.Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
