Outdiamater: 79mm Length: 991 Back adapter thread: API 2 3/8" REG Structure stroke: 127mm Working air pressure: 1.3 MPa-2.5Mpa Mathched bits: COP34, IR3.5" Wooden cases
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Pillar drilling machines 800 kgs 1250 x 700 Cap.12 mm to 65mm
Summary Advantages: Needless to replace the internals of the engine head, just handle the handle to operate it. Easy to operate. More time-saving and effortless. Drilling faster and more efficient. Have reached the tip-top level of the same field now, and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling, splitting breaking, ramming, shoveling. And widely used in mining, road contruction, quarrying and national defense construction, etc. Wooden crate
The pneumatic pick is a tool with compressed air as its power. The compressed air is distributing alternatively through the tube-shaped distributing valve into either end of the cylinder, so that the hammer is reciprocating motion in it, which impacts the tail-end of the pick rod and drives the pick rod into the rock or strata of mine, thus causing them to split into pieces.
The pneumatic pick is a tool with compressed air as its power. The compressed air is distributing alternatively through the tube-shaped distributing valve into either end of the cylinder, so that the hammer is reciprocating motion in it, which impacts the tail-end of the pick rod and drives the pick rod into the rock or strata of mine, thus causing them to split into pieces.
Drill pipe, tricone bit, down the hole hammer s andbit, chain wrenches, drill bit,
Max. Drilling capacity 20 in steel Motor power (rpm) 1.1kw/1000 1.1kw/1400 1.1kw/2880 Spindle speed (rpm) 510, 1000, 1830 750, 1440, 2900 1500, 2880 Spindle travel 100mm Working stroke 80mm(variable) Working area 350mmx340mm Thrust load at 6bar 650kg Distance between spindle to table max. 450mm Distance between spindle center to column front 213mm Distance from table top to base 750mm Hydraulic power pack Motor power rpm 0.75kw/1400 Tank capacity 75lts Pump output 15.6 lpm Operating pressure 30.35 bar Machine size (mm) 1300l x 700w x 1900h
Useful to electricians, articians, fabricators, construction industry for drilling in steel, wood, concrete & stone. Qty.1
Maximum drilling diameter: Up to 4" (100mm) Maximum cutting depth: Up to 4" (100mm) Each cutter is packed in the individiual plastic tube. Special cutters are available as per the buyer's requirements or drawings/samples export cartons
Standard: din338 Material: hss4241, hss4341, hss9341, m42; m35; m7; m2, etc Finish: black oxide, polished, tin coated and rainbow etc Process: roll forged, half ground, fully ground Point angle: 118 or 135 split point Application: for drilling cast steel, malleable iron, sintered metal, non-ferrous metals and wood, etc Packing: by plastic bag, metal box etc Diameter ranges from 1mm to 20mm. Drill sets like 13/19/25pcs are available. We make them in accordance with your demand. By plastic bag, metal box etc
Specification:2-1/2" 2-7/8" 3" 3-1/2" 4-1/4" 5-1/4" Kellys are the drive section of the whole drill stem.The manufacturing of the products refers to the standard of SY/T6509-2000 or API SPEC.7-1.AISI4145H alloy steel is used in producing the kellys. Kellys'end, drive cross-section and joint are all processed and tested in terms of API.
Purpose White Cushion (Amine-Coated Cushion) is a kind of new type drilling cushion for small hole, and is applicable for 0.15mm or less hole on precise multi-layer circuit board. It is designed for substituting bakelite board for meeting the requirements of IS014000. Technical Parameters: Code Items Unit Standard 1 Standard Thickness mm 2.3~2.7í+0.2 2 Density (Weight) g/cm3 880í+40 3 Water Content % [5 4 Non-Straightness of Edge mm/m í+1.0 5 Flexural Strength Max Turnup /Diagonal [0.5% 6 Elastic Modulus Mpa í¦3200 7 Internal Bonding Strength Mpa ú+1.0 8 200C/24hThickness Expansion after Absorbing Water (Bared) % í_35 9 Static Bending Strength Mpa í¦35 10 Size Stability Thickness Direction % -4.5 or 5 Length Direction % -0 or 1.50 11 Surface Hardness N/mm2 80í+5 12 Formaldehyde Release mg/100g [40
Wood working drills Shank: straight shank Surface treatment: black flute and bright land Blade material: 45# Length characteristic: standard Processing technology characteristic: roll forged drills
Masonry drills high helix Surface treatment: nickel plated Blade material: 45# yg8 Groove sort: high helix Length characteristic: standard Processing technology: milled
Emcf face cutter Iso inserts, selt, selw, sekt seht sehw suitable. High metal removal. High feed rate. Roughing to finishing. Over 15 kinds of grades & 5 kinds of chip breaker. Diameter from 50 - 160 mm
Tbra Iso insert, tcgt, tpgt suitable Side-lock Unique hexagon slide Fine adjustment & high precision Excellent internal structure without backlash Diameter from 20 - 100 mm The accuracy of one unit is 0.01 mm
Heavy duty pillar drill machine Model no. 38kpt Drilling capacity in steel 38mm No. Of spindle speed 8 Range of speed 70-1910 rpm Morse taper in spindle nose mt-4 Dist. Between spindle center to column face 270mm Quill movement 250mm Working surface of the table 440mm Dimension of base plate 760x480mm Working surface of base plate 500x350mm Max. Dist. Between spindle nose to baseplate 1000 Max. Dist. Between spindle nose to table 565mm Center dist. Between foundation bolts 620x335mm Diameter of column 112-60 Fine feed attachment Motor kw / speed 1.5hp / 960rpm No. Of v.Belt b-55 Nett weight of machine 350kg Standard accessories: motor pulley, instruction manual, drill drift. Extra accessories: electric motor, drill chuck & arbour, v.Belt, r.F switch. Wooden case packing, goony packing, export packing
Redial drill machine Model: 40krdfa (all geared autofeed redial drill machine) Capacity (m.M) Drilling in steel 38 Drilling in c. I. 40 Tapping in steel 32 Spindle Spindle travel 150 Spindle taper mt-4 No. Of spindle speeds 8 Range of spindle speeds 70-1190 No. Of feed 03 Feed value mm / rev. 0.1 0.2 & 0.3 Working range Column diameter 220 Max. / minimum dist. Between spindle centre to column face 890/370 Max. / minimum dist. Between spindle nose to base plate 1150/490 Vertical movement on column of railarm 660 Size of base plate 1365 x 715 Working surface of table 350x310 General Number / centre distance of "t" slots for base plate 2-138 Size of "t" slots for base plate m-16 Number / centre distance of "t" slots for working table 2-80 Size of "t" slots for working table m-16 Nett. Weight of the machine (approx.) 1500 kg. Shipping dimension of the machine 2200x1530x1115 Power Drilling head motor 1. 5 h. P. / 3ph-50hz / 1440 rpm Arm elevating head motor 0. 5 h. P. / 3ph-50hz / 1440 rpm Standard accessories Electrical equipment with wiring, drilling head motor, Arm elevating motor, instruction manual, motor pulley, drill drift. Extra accessories Working box table, machine lamp, coolant pump with accessories, Reversible switch, 'v' belt (b-47 / a-23), quick chain chuck, Drill chuck-arbour etc. Specification may be changed without prior notice in case of design modification
