Greetings, We can provide EN590-10PPM & Jet A1 Fuel to any safe port in the world on Cif. We are direct mandate to the refinery. EN590-10PPM MOQ: Trial 100,000 mt x 12 month Origin: OMAN JET A1 FUEL MOQ: 1,000,000 - 3,000,000 BBLS Origin: OMAN NOTE: The above quantities are subject to be changed. Prices are competitive. To get an accurate Sco/Fco includes quantities, price, payment, and procedures the respected client have to share the following: 1- Loi 2- Cis 3- Trade License 4- TSA/CPA For clients who are located in dubai and their companies are registered there. We have representatives in dubai can meet after verification of the client. Best regards
Product: Diesel EN590 10ppm Origin: Non-sanctioned Price: Available on fixed price and platts minus price CIF: Any Safe World Port FOB: Rotterdam / Fujairah / Houston / Singapore Destination: Any Safe World Port
Vision Group sources Diesel Fuel EN590 10 PPM from around the world, providing clients with an energy solution that aligns with international standards. Specification: Cetane Number: Minimum 51. Density: Typically ranges from 820 to 845 kg/m�³ at 15�°C. Sulfur Content: Ultra-low sulfur content, typically not exceeding 10 mg/kg (10 ppm) Polycyclic Aromatic Hydrocarbons (PAHs): Maximum limit of 8% by mass. Distillation Temperature: At least 95% of the fuel distill at 360�°C or below Flash Point: Minimum of 55�°C. Carbon Residue: Maximum limit of 0.30% by mass on the 10% distillation residue. Water Content: Maximum of 200 mg/kg. Biodiesel Content: EN 590 diesel fuel can contain up to 7% (V/V) of Fatty Acid Methyl Ester (FAME) Oxidation Stability: Minimum of 20 hours. Acid Number: Maximum of 0.50 mg KOH/g. Ash Content: Maximum of 0.01% by mass. Others, as per specifications that are part of purchase contract
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles.
EN590 10ppm Product - EN590 10ppm CIF worldwide - Market Price Product origin - Oil is excellent quality with Key Specifications/Special Features - Price will be quoted CIF and in USD. Minimum Order Size and Packaging details - minimum order size of 100000MT/per month with 12 month contract. Quantity of oil shipment must be worthy for transport on ships that transport crude oil and petroleum products in international waters, delivery is 30-40 days.
We have diesel 1000 ppm new fresh SGS qtty 50,000 mt in hymria by sgs the price $ 650 USD/ MT Commission 10$ for Easy First consulting Management Brokerage
We have the ja1 & en59010ppm product available in Rotterdam. Our company regulates oil contracts between the seller and the buyer well and reserves all the rights of the intermediaries and both parties (the seller and the buyer). We have most petroleum products available (en59010ppm & ja1) for those interested in the subject and serious buyers only, we offer our services. 100,000 metric tons of EN590 10 PPM material at the Rotterdam Port. price $735 per ton. $10 for brokers ($5 from seller side $5 from buyer side) 2,000,000 barrel JA1 Fuel at the Rotterdam Port price 92$ per barrel . $10 for brokers ($1 from the seller's side and $1 from the buyer's side). The deal will be subject to the following procedures: PROCEDURES (Tank to Tank ) JA1& EN590 10PPM. 1. Buyer issue ICPO, (TSA), Financial Capability, 2. Banking details, scanned copy of buyer's passport along with CP and Reg. Certificate. 3. Seller issues commercial invoice to be signed by Buyer and Seller. 4. Seller issue to Buyer the Dip Test Authorization document (DTA) which is to be signed by the Buyer, Seller, and Buyerâ??s logistic company as verification. 5. Seller issues the PPOP listed below to the Buyer: TSR with GPS coordinates of the Tank Location. Injection report. Certificate of Origin. Authorization to sell. SGS report. Product Passport (Lab Analysis Report). 6. Buyer Conducts Dip Test and sends TSR to Seller. 7. Upon successful Dip Test in Sellers Tanks, product will immediately be injected into Buyer's Tanks. Buyer makes payment for the product via MT103/TT." If these procedures and price suit the buyer's requirements, you can contact us.
25,000mt - 300,000mt/mo Ultra low Sulfur Diesel.
EN590, 100000 MTN , 12 moths. 10ppm. UAE. 1. Buyer issues ICO and Company Registration Certificate to Seller with Buyer's Passport �¡�¾�?�?. 2. Seller issues Cl to Buyer for the available quantity. Buyer signs and returns the CI to Seller. 3. Buyer issue POF via MT199 with they're bank funds for blocking order quantity. 4. Seller releases the SGS and POP document, Buyer do their own check SGS. 5. After the successful SGS check, Buyer makes 100% payment via TT/MT103 for the total product value to Seller and Seller transfers the Title Ownership to Buyer. and Buyer pay for TSR till transfer buyer to vessel. 6. Buyer Provide its nominated Vessel CPA, Q88 alongside with Safety Management Certificate of the Ship and lifting commences. 7. Seller submits the Draft SPA to Buyer for R & E monthly deliveries. 8. Buyer reviews and signs the SPA and issues SBLC MT760 or DLC MT700 for the length of the contract or for each lift preschedule. Buyer pays by MT103/TT after Dip Test on each month's delivery. The subsequent deliveries will commence according to the terms and conditions of the contract.
100,000 metric tons of EN590 10 PPM material at the Port of Rotterdam price is $735 per ton. The transaction will be subject to the following procedures: Procedures (tank to tank) FOB Rotterdam standard procedures: 1. Buyer issues ICPO, (TSA), financial capacity, 2. Bank details, scanned copy of buyer's passport along with CP and Reg. certificate. 3. The seller issues a commercial invoice signed by the seller and buyer. 4. The Seller issues to the Buyer a Dipping Test Authorization (DTA) document which must be signed by the Buyer, the Seller and the Buyer's logistics company as verification. 5. Seller issues the PPOP listed below to Buyer: â?? TSR with GPS coordinates of tank location. â?? Injection report. â?? Certificate of origin. â?? Permit to sell. â?? SGS report. â?? Product passport (laboratory analysis report). 6. Buyer conducts dip test and sends TSR to seller. 7. After successful dipping test in sellers' tanks, the product will be immediately injected into buyer's tanks. Buyer pays for the product via MT103/TT.
Good day! We are ready to supply EN590, Jet-A1. FOB Rotterdam/Fujairah. EN 590 100k, upgradable to 300 Jet A1 from 2 million barrels. We are the direct titleholders of the documents.
Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil. The "10 PPM" designation refers to the maximum allowable sulfur content in the fuel, which is 10 parts per million (ppm) or less. Here are some of the specifications for Diesel EN590 10 PPM: - Density at 15 C: 820-845 kg/m - Flash point: minimum 55 C - Cetane number: minimum 51 - Sulfur content: maximum 10 ppm - Distillation range: 90% distilled at 360-370 C - Cold filter plugging point: maximum -5 C - Appearance: Clear and bright, free from visible sediment and water Diesel EN590 10 PPM is primarily used as a fuel for diesel engines in automobiles, trucks, buses, and other vehicles. It is designed to meet the stringent emissions standards in Europe and other regions, which require lower levels of sulfur and other pollutants in diesel fuel. The use of low-sulfur diesel fuels like EN590 10 PPM can help to reduce air pollution and improve air quality, as well as reduce the emissions of greenhouse gases.
AGO Bitumen Crude Oil Diesel EN590 Gasoline Jet Fuel Kerosene LNG LPG Mazut Natural Gas Sulphur Urea
EN590 diesel from non-russian refineries available for sale on CIF basis. We have direct contacts with refineries and direct sellers. Only serious buyers with LOI may contact.
We deliver quality Diesel allover Dammam, Jubail and Al Khobar areas for any purpose
Product : EN590 10 PPM Origin: Kazakhstan Quantity: 100,000 MT / 500,000M with possible rolls and extensions FOB Rotterdam Origin: Kazakhstan Currency: USD Kindly contact us if you are interested.
Diesel fuel Euro 5 (EN590)
Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply Price: Gross $370.00 USD/$350 .00 USD Net on FOB Price: Gross $390.00 USD/$380 .00 USD Net on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply Price: Gross $380.00 USD/$370 .00 USD Net on FOB Price: Gross $400.00 USD/$390 .00 USD Net on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
Product: EN590 10PPM - Quantity: 50,000 MT - Price: $680 Net per MT FOB Fujairah (Tank to Tank or Tank to Vessel) FOB Procedure DIP & PAY Fujairah: 1. Buyer issues ICPO with full banking information along with full KYC. 2. Seller issues Invoice (CI) for the available quantity in the Sellerâ??s Storage Tank to the Buyer. Buyer signs and returns the CI to the Seller. 3. Buyer issues MT199 as proof of funds, CPA/TSA to Sellers account from prime 50 top bank/ bank to bank verification (companythat will send ICPO must be the same that will issue the MT 199, no JVâ??s with exits, or other agreement with end buyers accepted). 4. Seller presents the following documents to the Buyer to conduct Dip Test in Sellerâ??s tank: A. Unconditional Dip Test Authorization (DTA); B. TSR; C. Certificate of Origin. 5. Buyer conducts Dip Test in the Sellerâ??s Tank and upon successful Dip Test immediately provides the Seller with Q88 or valid verifiable TSR. 6. Seller signs NCNDA/ IMFPA with intermediaries for non disclosure and payment if commissions to be paid out immediately upon receipt of payment from the buyer. 7. Buyer issues 100% MT103/TT Wire Transfer payment to the Seller. 8. Seller signs Tank To Vessel Injection Agreement (TTVIA) or tank to tank (TTIA) to commence injection of product into the Buyerâ??s vessel or TSR FROM BUYER TO COMMENCE INJECTION OF PRODUCT TO BUYER'S TANK with Full coordinates. Seller transfers the Title of the product Ownership to the Buyer. 9. Buyer and Seller sign a long term contract for the consistent supply for a mutually agreeable quantities.
