D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400. Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles.
As Per Seller Procedure only Dip and pay CIF FOB
As Per Seller Procedure only. Dip and pay CIF FOB
As Per Seller Procedure only. Dip and pay CIF FOB
We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
EN590 Diesel Fuel EN590 DIESEL FUEL PRODUCT ORIGIN: KAZAKHSTAN DELIVERY: CIF, FOB, TTO INSPECTION: SGS PAYMENT METHOD: TT, MT103, TRC20USDT Quantity. 100, 000MT per month for 13 months. Shipping Terms. CIF is possible, yes. Destination Port. Jurong Singapore possible
EN590 10PPM 50PPM Origin Non-Sanction Country
Cetane Number 51 min Density at 15�°C 820-845 Kinematic Viscosity 2.0-4.5 at 40 C Sulfur Content 10 max Distillation, 90% Recovered at �°C 370 max Total Contamination 24 max Copper Strip Corrosion, 3 hrs at 50�°C Class 1 max Water Content 200 max Sediment Content 0.05 max Cloud Point -5 max Pour Point -15 max Ash Content 0.01 max
High quality Diesel EN590 10 ppm with origin from Central Asia - No Kazakhstan origin! Loading Ports: FOB Rotterdam, Houston, Fujairah, Jurong Agreement Payment: MT103 Wire Transfer or Telegraphic Transfer (TT) Min MOQ: 50,000 Metric Tons per Month Max MOQ: 300,000 Metric Tons per Month
Looking for buyers. EN590 10ppm available in Singapore and Malaysia. >> No LC >> Payment after Dip Test by MT103/TT >> TTO / TTV >> Origin: Kazakhstan >> Price: USD$465 PER MT(non negotiable) >> Quantity: At least 100,000 metric tons per month 12 consecutive months
I'm end seller. $480/MT CIF AWSP minimum 50,000MT/month for a year. Ship to your Tank. Shipping straight from refineries to any safe world port. No any upfront/deposit. 2% PB to buyer for guarantee of delivery. ~PRODUCT:DIESEL FUEL EN590-10PPM ~ORIGIN:Kazakhstan ~CURRENCY:USD ~Price: USD$480 PER MT ~QUANTITY: At least 50,000 metric tons per month 12 consecutive months ~DESTINATION: SHIP TO TANK xxx PORT /ASWP ~MODE OF PAYMENT: SBLC/DLC + MT103/TT(No any upfront/deposit) ~2% PB to buyer for guarantee of delivery Best Regards,
Our 10PPM Diesel Fuel, compliant with GOST R 52368-2005 and EN590 standards, is a premium quality diesel fuel designed for high-performance and efficiency. This diesel fuel contains a maximum sulfur content of 10 parts per million (PPM), making it an environmentally friendly option that meets stringent European emission standards. Key Features: 1. Low Sulfur Content: With a maximum of 10 PPM sulfur, this diesel fuel significantly reduces harmful emissions, contributing to a cleaner environment. 2. High Efficiency: Engineered for optimal combustion, it ensures excellent engine performance and longevity. 3. Regulatory Compliance: Conforms to GOST R 52368-2005 and EN590 standards, ensuring reliability and quality. 4. Versatility: Suitable for use in a wide range of diesel engines, from passenger vehicles to heavy-duty industrial machinery. Benefits: 1. Environmental Protection: Lower sulfur content means reduced sulfur dioxide emissions, helping to combat air pollution. 2. Engine Protection: Enhances engine durability by reducing wear and deposits, leading to lower maintenance costs. 3. Fuel Economy: Improved combustion efficiency results in better fuel economy, saving costs in the long run. 4. Compliance Assurance: Meets international standards, ensuring compatibility and regulatory compliance across different regions. Choose our 10PPM Diesel Fuel for a cleaner, more efficient, and environmentally responsible fuel solution that does not compromise on performance.
Metal and energy
Metal and energy
Diesel EN 590
Diesel Powering your journey with efficiency and reliability. Our premium diesel fuel is designed to optimize engine performance while minimizing emissions. With a blend engineered for maximum power output and fuel efficiency, it\'s the smart choice for drivers seeking both performance and environmental responsibility. Whether you\'re hitting the highway or navigating city streets, trust our diesel to keep your engine running smoothly mile after mile.
We sell Oil and Gas Products Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6
We sell Oil and Gas Products Wholesale Diesel gas d2 gost 305-82 Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6 We are an oil and gas company Agents, Facilitators and Mandate; we source crude oil for Refineries and large volume buyers, and other petrochemicals like AGO, LPFO, PMS, DPK and other Russia product origin listed below for the upstream and downstream sectors consumption. 1) D2- Gas Oil (Diesel) Lo.2-62 Gost 305-82 , Quantity- 50,000mt 500,000mt For Cif And Fob, Spot And Contract Basis. 2) Jp54 Aviation Kerosine Colonial Grade 54 Russia Origin, Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 3) Aviation Turbine Fuel Jet A-1 Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 4) Bitumen Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 5) M100 Mazut 100 Gost 10585-99 And 10585-75, Quantity- 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 6) Liquid Petroleum Gas.Gost 20448-90, Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 7) Liquified Natural Gas, Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 8) Russia Sn 150 Base Oil, Quantity - 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 9) Russia Sn 500 Base Oil, Quantity 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 10) En590 Biodiesel, Quantity 50,000mt- 500,000mt, For Cif And Fob, Spot And Contract Basis. 11) Automotive Gas And Oil (Ago), Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 16) Russia Export Blend Crude Oil (Rebco), Quantity 1,000,000bbls 6,000,000bbls, For Cif And Fob, Spot And Contract Basis.
