Model No SJ186FE (Electric starter) Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection Bore Stroke (mm) 86 70 Displacement(cc) 406 Compression ratio 19:01 Rated power/ Rated speed (Hp/r/min) 7.7/3000 8.60/3600 Max power/ Max speed (Hp/r/min) 8.6/3000 10.0/3600 Lubricating system Pressure splashed Starting system Electric starter Rotation direction(face to the output axle) Clockwise Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(us.gal) 5.5/1.45 Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600 Lube oil type CD grade or SAE 10W-30, 15W-40,40CC Lube oil capacity (L)/(us.gal) 1.65/0.44 Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Package dimensionL W Hmm 525X470X565 Net weight(kg)¤51.5
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX100 2.5hp Displacement: 97 (cc) Bore Ã? Stroke: 52mm Ã? 46mm Rated Power Output: 1.9HP (1.4)KW / 3600rpm Max. Power Output : 2.5HP (1.8)KW / 3600rpm Torque (N.M): 3.8 / 2500 Compression Ratio: 5.6 : 1 Fuel Tank Capacity: 1.4 (L) Engine Oil Capacity: 0.45 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 9 / 10 Dimension (LÃ?WÃ?H): 310 Ã? 290 Ã? 370 20FT (set): 900
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX270 9hp Displacement: 270 (cc) Bore Ã? Stroke: 77mm Ã? 58mm Rated Power Output: 7.5HP (5.5)KW / 3600rpm Max. Power Output : 9.0HP (6.6)KW / 3600rpm Torque (N.M): 15.5 / 2500 Compression Ratio: 8.2 : 1 Fuel Tank Capacity: 6.0 (L) Engine Oil Capacity: 1.1 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 25 / 27 Dimension (LÃ?WÃ?H): 490 Ã? 430 Ã? 500 20FT (set): 236
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX420 16hp Displacement: 420 (cc) Bore Ã? Stroke: 90mm Ã? 66mm Rated Power Output: 11.0HP (8.1) KW / 3600rpm Max. Power Output : 15.0HP (11.8) KW / 3600rpm Torque (N.M): 26 / 2500 Compression Ratio: 8.3 : 1 Fuel Tank Capacity: 6.5 (L) Engine Oil Capacity: 1.1 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 32 / 34 Dimension (LÃ?WÃ?H): 490 Ã? 430 Ã? 510 20FT (set): 236
C.A.G’s 163cc, OHV, air-cooled gasoline engine delivers a max of 5.5HP and 9.5N.m/2500rpm torque to the power sources. This OHV gasoline engine is an easy-to-install solution for small engine needs. Dual ball bearing forged-steel crankshafts are mounted, making this 5.5hp engine an ideal replacement for most standard engine configurations. The built in oil alarm system means the 5.5hp gasoline engine will automatically shut down when it runs low on oil, preventing engine damage or failure. This C.A.G general purpose engine is ideal for generators, pressure washers, water pumps, tillers, cultivators, and other outdoor power equipment.
Product name: genuine marine engine nt855 crankshaft 3608833 Type : crankshaft Model number: 3608833 Oe no: 3608833 Size: standard size Engine type: diesel Brand name: ccec Place of origin: china mainland chongqing More detail: application ship Moq: 1 piece Payment items: western union, t/t, l/c Warranty: 12 months
Caterpillar diesel engine Caterpillar 3516 Warranty 12 months 0 hrs This is Reman engine Available other engines, like C32, C27
A&S Construction Machinery Co., Ltd. supplies all types of harnesses. All the brands of harnesses we can provide: CAT harnesses, KOMATSU harnesses, JOHN DEERE harnesses, SANY harnesses, XCMG harnesses, VOLVO harnesses, HITACHI harnesses, SUMITOMO harnesses, LIEBHERR harnesses, DOOSAN harnesses, CASE harnesses, BOBCAT harnesses, KUBOTA harnesses, YANMAR harnesses, HYUNDAI harnesses, DAEWOO harnesses, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of Connecting rods. All the brands of Connecting rods we can provide: CAT Connecting rods, KOMATSU Connecting rods, JOHN DEERE Connecting rods, SANY Connecting rods, XCMG Connecting rods, VOLVO Connecting rods, HITACHI Connecting rods, SUMITOMO Connecting rods, LIEBHERR Connecting rods, DOOSAN Connecting rods, CASE Connecting rods, BOBCAT Connecting rods, KUBOTA Connecting rods, YANMAR Connecting rods, HYUNDAI Connecting rods, DAEWOO Connecting rods, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
A&S Construction Machinery Co., Ltd. supplies all types of drive motor carriers. All the brands of drive motor carriers we can provide: CAT drive motor carriers, KOMATSU drive motor carriers, JOHN DEERE drive motor carriers, SANY drive motor carriers, XCMG drive motor carriers, VOLVO drive motor carriers, HITACHI drive motor carriers, SUMITOMO drive motor carriers, LIEBHERR drive motor carriers, DOOSAN drive motor carriers, CASE drive motor carriers, BOBCAT drive motor carriers, KUBOTA drive motor carriers, YANMAR drive motor carriers, HYUNDAI drive motor carriers, DAEWOO drive motor carriers, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of Engines. All the brands of Engines we can provide: CAT Engines, KOMATSU Engines, JOHN DEERE Engines, SANY Engines, XCMG Engines, VOLVO Engines, HITACHI Engines, SUMITOMO Engines, LIEBHERR Engines, DOOSAN Engines, CASE Engines, BOBCAT Engines, KUBOTA Engines, YANMAR Engines, HYUNDAI Engines, DAEWOO Engines, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
(1) Diesel engine for generator use (2)Diesel engine for water pump use 2 Diesel engine spare parts (1)Diesel engine for generator use 代表å?¾ç??ï¼?495D Type Cyliner/Bore/Stroke Intake Method Combustion Type Rated Output/ Speed Min. Fuel Consumtion Net Weight (mm) (Kw/r/min) (g/kw.h) (kg) 495D 4/95/115 Natural Aspirated Turbo Method 26.5/1500 246 380 495D2 4/95/115 Natural Aspirated Turbo Method 30/1800 246 380 K4100D 4/100/115 Natural Aspirated Turbo Method 30.1/1500 246 380 K4100D2 4/100/115 Natural Aspirated Turbo Method 34/1500 246 380 K4100ZD 4/100/115 Turbocharged Turbo Method 42/1500 235 390 K4100ZD2 4/100/115 Turbocharged Turbo Method 45/1800 235 390 N4102D 4/102/120 Natural Aspirated Direct Inject 36/1500 235 380 N4102ZD 4/102/120 Turbocharged Direct Inject 48/1500 230 390
Specifications Rated Output 419 kW 57 mhp Rated Speed 3000 rpm Displacement 219 L 134 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 88 mm x 90 mm 346 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Natural Alternator 12V 125A Dry weight without gear 220 kg 485 lbs Dimensions 870 mm x 589 mm x 627 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM35P marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A C35 panel Extension harness 3m 5m 10m Second station TFX Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Specifications Rated Output 588 kW 80 mhp Rated Speed 3200 rpm Displacement 2 L 122 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm 331 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Turbocharged Intercooled Alternator 12V 125A Dry weight without gear 229 kg 505 lbs Dimensions 909 mm x 613 mm x 675 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM4A2 marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A Seawater pump rear mounted B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A Seawater pump front mounted C35 panel Extension harness 3m 5m 10m Second station Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Opposite dipstick Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Specifications Rated Output 80.9 kW / 110 mhp Rated Speed 3200 rpm Displacement 1.995 L / 121.7 cu. in No. of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm / 3.31 in x 3.54 in Combustion system Direct Injection, Bosch Distributor Type VE Pump Aspiration Turbocharged & Intercooled Alternator 12V - 125A Dry weight without gear 217 kg / 478 lbs Dimensions 933 mm x 661 mm x 659 mm Controls Mechanical Certifications RCD 1 EPA Tier 2 BSO II EMC SOLAS NOTE: 1 kW = 1.3596 mhp = 1.34102 bhp Fuel condition: density at 15 C = 0.842 g/cm Technical data is according to (ISO 8665) / (ISO 3046) Fuel temperature 40 C at the inlet of the fuel injection pump (ISO 8665) Length includes KM4A2 marine gear (Dimensions may vary with other gears/elbow) Standard Engine Package Exhaust mixing elbow [L-type] Alternator 12V 125A B20 panel Flexible mounts Expansion tank for fresh water cooling system Electric stop solenoid Optional Accessories High-riser mixing elbow [instead of L-elbow] Secondary alternator 12V â 130A or 24V 75A including smart regulator C30 panel Extension wire harness [4m, 6m, 10m] Dual harness [for 2nd station] TFX Sidemount control head SOLAS including Certificate [factory fit only] Hot water kit with cocks Extension saildrive leg [75 mm] Propeller cone nut kit SD60 Air heater [glow] Trolling valve [only for KMH4A] On-board spare parts kit
Technical data OXE Kreta Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, intercooled Torque: 380 415 Nm at 2500 rpm Power: 150 200 HP at 4100 rpm Fuel: Diesel Weight: 340 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering: Electronic Power Steering Shift: Elecro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios (interchangeable): 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678 mm Optimised for tenders: Yes
Technical Data Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, inter-cooled Torque: High Speed: 380Nm (280 ft-lb), 607NM (447 ft-lb) @ 2500 RPM Power: 175 HP at 4100 RPM Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 350 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering options: Hydraulic, Electronic Power Steering, Joystick Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678mm
Technical data - OXE 200 Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, inter-cooled Torque: 415 Nm at 2500 rpm Power: 200 HP at 4100 rpm Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 350 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering: Electronic Power Steering Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678mm
Technical Data Engine type: Diesel, L6 Displacement: 3.0 L Intake: Turbocharged, inter-cooled Torque: 680 Nm (501ft-lb) at 1750 RPM Power: 300 HP at 4200 - 4400 RPM Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 395 kg Alternator output: 180 Amp Rig length: 25â?? or 33â?? Cooling: Closed cooling circuit Starting: Electric Steering option: Hydraulic, Electronic Power Steering, Joystick Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.39:1 Dimensions (XL 25â?? leg/ XXL 33" leg), LHW XL, 1150x2090x700mm. XXL, 1150x2293x700mm (CC32")
We have a used 600PS Yanmar S165ET Diesel engine w/gearbox, in working condition, available for purchase from our yard in Japan. This engine was extracted from a Fishing ship at our yard and is operational. Interesting companies please contact us at the soonest.
