Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more. Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control. Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. Adopted low frequency isolated transformer, high conversion efficiency and stable performance Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc.
Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more. Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control. Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. Adopted low frequency isolated transformer, high conversion efficiency and stable performance Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated.
SN201MM converter use one single source with VGA port or single source with YPbPr component accessing to single sink with HDMI port. The converter / switcher allows RGB signal to be converted easily to TMDS signal. Features One YPbPr input. One VGA input. R/L analog audio input.(can’t be used with stereo Mini-Jack audio at the same time). 3.5mm Stereo Mini-Jack audio input. (can’t be used with R/L audio input at the same time). One HDMI signal output. Support input up to 1080P via component. Support VGA input: 800x600,1024x768,1152*864,1280*720,1280x768,1280x800,1280x960,1280x1024,1360x768,1366x768,1440x900,1680x1050,1920x1080 HDMI output resolution:720P/ 60Hz. 1080P/ 60Hz Adaptive PAL / NTSC standard. LED indication: when source or sink is working, LED relative to is light. Inputs can be switched with the IR remote control,also can be controlled by button. Support output up to 20metres AWG26 cable length Installs in minutes Need DC5V/2A power supply
The USB 3.0 multi-function AV converter can allow the user connect the two HD Display and multi USB Device and Audio equipment. It have expanded the pc function a lot and also it can be used only connect it with pc by the USB cable. The expanded part employs two USB3.0 Ports, which both can do power charge to the smart phone at the off mode. It can still do power charge to the mobile phone, MP3 and other similar device when the pc is at off mode. It supports the simultaneous output of the HDMI and VGA. Features Expand at AV include: One Microphone port and one headphone port (it can connect the Advanced Speaker). One HDMI output port and one VGA output port allows connect two HD Display that can support most up to 1920*1080 resolution. Support USB input for PC or notebook Support Video Output: HDMI Signal, VGA Signal (Support both routes of signal output simultaneously) Supply two USB3.0 Ports, it can connect the USB Keyboard , mouse or other Device with USB port. Support audio input and output, supply one Microphone port and one headphone audio port. Support Ethernet Connect function(Network Interface Card Function) Supported Function: 1.Primary 2.Extended 3.Mirror Compliant With USB 3.0,Compliant With USD 2.0 HDMI Output Resolution:Support480I,480P,576I ,576P,720P,1080I,and 1080p HDMI Output: support up to 1920*1080 resolution and same format as the input signal(fresh rate 60Hz 32 True Deep Color) Support Windows® Vista, Windows®7,and Windows® and Mac OS X HDMI and VGA output port support CRT, LCD, Projector and other display. No Loss of Signal Easy to Install Need DC5V/3A power adaptor
The HDMI Converter allows you to extract audio signals from your HDMI source. You can take your original HDMI audio signal and convert it to digital optical or analog multi-channel output. This product supports 2CH, 5.1CH, 7.1CH LPCM digital audio format convert. It is one perfect audio converter for your DVD, Blue-Ray DVD, PS3, X360BOX, HD Player, PC etc. FEATURES: 1X HDMI input and 1X HDMI output,can sync separation HDMI audio signal. Supports 1x SPDIF optical digital audio output, multi-channel RCA analog audio output Supports 12-bit Deep Color Full HD,3D and 4K2K video Support CEC Support multi-channel LPCM digital audio to analog output, up to 7.1CH. Uses 24bit /192KHz DAC LPCM audio format indicator Supports 3 modes for audio output. You can switch among multi-channel, stereo (2CH) and mute. High tone quality, low noise DC 5V power adapter
The hdmi converter box can convert one input hdmi signal into a vga analog video signal and one digital audio or one analog audio output. The hdmi input port can be connected to any standard hdmi signal source device (such as the dvd player, ps3, s xbox360, stb, pc) .The vga output port can be connect to display device (tv/ monitor/ projector ) . The spdif/audio port can output high quality sound to an av surround amplifier. Features One single hdmi signal input convert to one vga + spdif or one vga+ analog audio signal output. Support hdmi input: 480p/720p/1080p @60hz Vga output resolution format with the input format automatically changes: 640×480@60hz, 800×600@60hz, 1024×768@60hz, 1280×720@60hz, 1280×768@60hz, 1280×800@60hz, 1280×1024@60hz, 1360×768@60hz, 1600×1200@60hz, 1920×1080@60hz The corresponding hdmi resolution: Hdmi input Vga output 480p 640×480 @60hz 720p 1280×720 @60hz 1080p 1920×1080 @60hz Support dts/ac3/lpcm/pcm digital audio output, support 5.1ch Built-in digital audio decoder, the lpcm/pcm digital audio decoding into analog stereo output Low-power digital single chip solution, less heat and long time stability Easy to install and automatically check the input signal No need extra power supply
This device MINI DP to 2 port HDMI converter is to turn the DP signal into two routes of HDMI Signal output. The converter allows one DP devices to be split easily to two HDMI compatible monitors or projectors. FEATURES One MINI DP signal input converter and split to two HDMI signal output. Support 3D Support deep color 24bit,30bit, 36bit Support 24/50/60fs/HD-DVD/xvYCC Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD Support signal retiming Support output up to 20metres AWG26 HDMI standard cable length No loss of quality Installs in minutes Need DC5V/1A power supply
The converter can allow one VGA Input+ one SPDIF audio input or one VGA input +one RL audio input, one HDMI output. It can easily change the VGA+SPDIF or VGA+RL signal to the HD Signal to play at the HD Display. FEATURES One VGA+RL input or One VGA+SPDIF input change to One HDMI Signal Support video input : VGA analog Support Audio Input: RL Analog Signal, SPDIF Digital Signal. HDMI output : Support up to 1920x1080@60HZ Support VGA input: 800x600@60HZ,800x600@75HZ,1024x768@60HZ, 1024x768@75HZ 1152*864@60HZ,1152x864@75HZ,1280*720@60HZ,1280x768@60HZ,1280x800@60HZ,1280x960@60HZ,1280x1024@60HZ,1280x1024@75HZ,1360x768@60HZ,1366x768@60HZ,1440x900@60HZ,1600x1200@60HZ,1680x1050@60HZ,1920x1080@60HZ HDMI output resolution:720P/ 60Hz. 1080P/ 60Hz; Adaptive PAL / NTSC standard. It can choose the SPDIF audio or RL audio input by use the manual button. The HDMI Output cable length can support up to 15M if use the standard AWG26 HDMI Cable. low-power digital single chip solution, less heat and long time stability Easy to Install and Automatically Check the input signal It can do power supply by the Micro USB Power Supply Port
The converter can turn the CVBS signal + Audio (L/R) input signal into the HD Signal output. The converter can improve and scale the input analog audio and video signal to the more stable and clear 720p or 1080p digital signal output. Inputs: 3RCA Outputs: 1 HDMI Support: CEC 1080P
The device can converter the HDMI signal to SD-SDI, HD-SDI and 3D-SDI signal. It integrates SDI receiver and HDMI modulator to help the device to change the HDMI signal to SDI signal and embed the audio signal from HDMI into the SDI signal to do simultaneously transmit of the audio and video. FEATURES Input Video Signal: One HDMI Input Video Signal Output: Two SDI output that support SD-SDI,HD-SDI and 3G-SDI signal. Support HDMI Resolution:480I@60Hz?576I@50Hz?720P@50Hz?720P@60Hz?1080I@50/60Hz?1080P@25 Hz?1080P@30 Hz?1080P@50/60Hz. HDMI Output:720P/ 60Hz,1080P/ 60Hz,PASS Three Modes For Choose(Default PASS Mode) Support Both SDI Output simultaneously. Output Audio Signal: SDI Built-in Support Auto Recognition Resolution Audio and Video Output Simultaneously No loss of quality Installs in minutes Wide voltage input, It can support DC 5V~ 12V input
The 2 Port HDMI Audio Converter can allow two HD Display/TV connected to one HDMI Source and also can extract audio signals from your HDMI source. You can take your original HDMI audio signal and convert it to digital optical or 2 channel analog audio output. This product supports Dolby digital AC-3, DTS, LPCM and other digital audio format output. It is one perfect audio converter for your DVD, Blue-Ray DVD, PS3, X360BOX, HD Player, PC etc. FEATURES: 1X HDMI input and 2X HDMI output,can sync separation HDMI audio signal. Supports 1x SPDIF optical digital audio output, 2 channel RCA analog audio output Support HDMI input up to 1080P/60Hz, supports 3D (24/30fs) Support SPDIF digital audio format: Dolby digital (AC3), DTS, LPCM, and support 5.1CH Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV). LED indication: when source or sink is working, LED relative to is light. Uses 24bit /192KHz DAC No loss of quality Installs in minutes DC5V/1A power adapter
Features: 1. Complies with 802.3u 100Base-TX and 100Base-FX 2. Provides UTP-to Fiber media conversion 3. Extentds network span to 2Km(multimode) 120Km(single mode) 4. Auto-negotiation on 100Base TX TP port 5. nteroperable with 100Base TX/TX devices 6. Provides Power, Link, and Receive Status LED Display 7. Supports a variety of fiber optic connectors to satisfy the extended requirements of users Applications: 10/100/1000Mbps Gigabit Optical Ethernet network with long-distance transmission
Solar Inverter Charger 1500VA 12V DC to 220V AC with 40A MPPT Solar charge Controller 1. Pure sine wave inverter 2. Builtin MPPT solar charge controller 3. Selectable input range for home appliances and personal computers 4. Selectable charging current based on applications 5. Configurable AC/Solar input priority via LCD setting 6. Compatible to mains voltage or generator power 7. Auto restart while AC is recovering 8. Overload and short sircuit protection 9. Smart battery charger design for optimized battery performance 10. Colad start function 11. Parallel operation with up to 6 units only available for 4KVA/5KVA 12. Optional Remote Control Panel available only available for 4KVA/5KVA
3000W 48V DC to 120V/230V AC Inverter Charger 1) Pure sine wave 2) AC smart charger 3) 300% surge power 4) Configurable AC/Solar input priority 5) 30A/70-90A max. AC charging current 6) Compatible to mains voltage or generator power 7) LED/LCD Smart Remote Control (RMT) (Optional) 8) DC start and automatic self-diagnostic function 9)Low DC voltage supports home and office appliances 10) High efficiency design and “Power Saving Mode” to conserve energy 11) 13 VDC battery recover point, dedicated for renewable energy systems 12) 8 pre set battery type selector plus De-sulphation for totally flat batteries 13)15s delay before transfer when AC resumes, protection for load when used with generator
Home Inverter 2KW with 40A/60A Solar/AC Charger 1) Pure sine wave 2) AC smart charger 3) 300% surge power 4) Configurable AC/Solar input priority 5) 30A/70-90A max. AC charging current 6) Built-in 40A/60A solar charge controller 7) DC start and automatic self-diagnostic function 8) LED/LCD Smart Remote Control (RMT) (Optional) 9) Compatible to mains voltage or generator power 10) Low DC voltage supports home and office appliances 11) High efficiency design and “Power Saving Mode” to conserve energy 12) 13 VDC battery recover point, dedicated for renewable energy systems 13) 8 pre set battery type selector plus De-sulphation for totally flat batteries 14)15s delay before transfer when AC resumes, protection for load when used with generator
LCD Screen 120VDC to 380VAC off Grid Motor Converter Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements. Technical Data Model BZP-5KW Isolation mode Low Frequency Transformer DC Input Rated voltage (Vdc) 96V 120V Rated current(A) 52A 42A AC Output Rated output power 5KW Output waveform Pure Sine Wave Rated Voltage 220V±3% 380VAC±3% Phases Single phase 3 phase 4 wire Rated current(A) 23A 7.6A (phase current) Frequency 50Hz or 60Hz Rated output voltage range (V) 110/120/220/230/240/380/400/415VAC optional Power Factor(PF) 0.9 Overload Ability 150%, 5 seconds Efficiency >93% Waveform distortion rate (THD)
Product Features 1, Adopting the proposed dynamic VI maximum power point tracking (MPPT) control method & optimized SVPWM; fast response and stable operation; and the conversion efficiency achieves of 99.6%. 2, Adopting high-efficiency IPM (intelligentpower module) from Mitsubishiwith high reliability and high efficiency. 3, Designed with variable frequency driver (VFD), can be used in variable frequency speed regulation technology, greatly improves efficiency, and better to protect water pump and maximum utilizationof solar panels. 4, AC drive function. When is no sunshine, such as at night, solar pump inverter can connect to AC city power to work by manually if AC power is available. 5, LCD display operating panel, can setting various parameters through LCD, easy to operation. 6, Complete protection function for PV input under voltage, PV input over voltage, input connection Reverse Polarity, DC over current, output, over load, short circuit, dry Well, overflow, dry running, and blocking protection.
High quality power converter with AC bypass function Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
60kw DC to AC off Grid Solar Hybrid Load Invertor Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
Dual Solar Iputs Battery Charge Cotroller Cotrol usig commo positive polarity way Accept 2 lies iput of solar module arrays Digital ad module structure desiged LCD equipped (backlight) to show parameters of system ruig status High efficiecy with by PWM chargig method Ati-reverse coectio, o chargig reversely while ight. Ad over-charge, limited chargig curret &voltage protectios for battery Equipped with system abormal status alarm fuctio Users ca to adjust the system parameters by settig keys Equipped with data commuicatio fuctio (optioal) Be able to offer DC power supply (optioal) Day ad ight double processig mode Wall moutig type is easy to istallation
