Features: 1. Complies with 802.3u 100Base-TX and 100Base-FX 2. Provides UTP-to Fiber media conversion 3. Extentds network span to 2Km(multimode) 120Km(single mode) 4. Auto-negotiation on 100Base TX TP port 5. nteroperable with 100Base TX/TX devices 6. Provides Power, Link, and Receive Status LED Display 7. Supports a variety of fiber optic connectors to satisfy the extended requirements of users Applications: 10/100/1000Mbps Gigabit Optical Ethernet network with long-distance transmission
Solar Inverter Charger 1500VA 12V DC to 220V AC with 40A MPPT Solar charge Controller 1. Pure sine wave inverter 2. Builtin MPPT solar charge controller 3. Selectable input range for home appliances and personal computers 4. Selectable charging current based on applications 5. Configurable AC/Solar input priority via LCD setting 6. Compatible to mains voltage or generator power 7. Auto restart while AC is recovering 8. Overload and short sircuit protection 9. Smart battery charger design for optimized battery performance 10. Colad start function 11. Parallel operation with up to 6 units only available for 4KVA/5KVA 12. Optional Remote Control Panel available only available for 4KVA/5KVA
3000W 48V DC to 120V/230V AC Inverter Charger 1) Pure sine wave 2) AC smart charger 3) 300% surge power 4) Configurable AC/Solar input priority 5) 30A/70-90A max. AC charging current 6) Compatible to mains voltage or generator power 7) LED/LCD Smart Remote Control (RMT) (Optional) 8) DC start and automatic self-diagnostic function 9)Low DC voltage supports home and office appliances 10) High efficiency design and “Power Saving Mode” to conserve energy 11) 13 VDC battery recover point, dedicated for renewable energy systems 12) 8 pre set battery type selector plus De-sulphation for totally flat batteries 13)15s delay before transfer when AC resumes, protection for load when used with generator
Home Inverter 2KW with 40A/60A Solar/AC Charger 1) Pure sine wave 2) AC smart charger 3) 300% surge power 4) Configurable AC/Solar input priority 5) 30A/70-90A max. AC charging current 6) Built-in 40A/60A solar charge controller 7) DC start and automatic self-diagnostic function 8) LED/LCD Smart Remote Control (RMT) (Optional) 9) Compatible to mains voltage or generator power 10) Low DC voltage supports home and office appliances 11) High efficiency design and “Power Saving Mode” to conserve energy 12) 13 VDC battery recover point, dedicated for renewable energy systems 13) 8 pre set battery type selector plus De-sulphation for totally flat batteries 14)15s delay before transfer when AC resumes, protection for load when used with generator
LCD Screen 120VDC to 380VAC off Grid Motor Converter Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements. Technical Data Model BZP-5KW Isolation mode Low Frequency Transformer DC Input Rated voltage (Vdc) 96V 120V Rated current(A) 52A 42A AC Output Rated output power 5KW Output waveform Pure Sine Wave Rated Voltage 220V±3% 380VAC±3% Phases Single phase 3 phase 4 wire Rated current(A) 23A 7.6A (phase current) Frequency 50Hz or 60Hz Rated output voltage range (V) 110/120/220/230/240/380/400/415VAC optional Power Factor(PF) 0.9 Overload Ability 150%, 5 seconds Efficiency >93% Waveform distortion rate (THD)
Product Features 1, Adopting the proposed dynamic VI maximum power point tracking (MPPT) control method & optimized SVPWM; fast response and stable operation; and the conversion efficiency achieves of 99.6%. 2, Adopting high-efficiency IPM (intelligentpower module) from Mitsubishiwith high reliability and high efficiency. 3, Designed with variable frequency driver (VFD), can be used in variable frequency speed regulation technology, greatly improves efficiency, and better to protect water pump and maximum utilizationof solar panels. 4, AC drive function. When is no sunshine, such as at night, solar pump inverter can connect to AC city power to work by manually if AC power is available. 5, LCD display operating panel, can setting various parameters through LCD, easy to operation. 6, Complete protection function for PV input under voltage, PV input over voltage, input connection Reverse Polarity, DC over current, output, over load, short circuit, dry Well, overflow, dry running, and blocking protection.
High quality power converter with AC bypass function Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
60kw DC to AC off Grid Solar Hybrid Load Invertor Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
Dual Solar Iputs Battery Charge Cotroller Cotrol usig commo positive polarity way Accept 2 lies iput of solar module arrays Digital ad module structure desiged LCD equipped (backlight) to show parameters of system ruig status High efficiecy with by PWM chargig method Ati-reverse coectio, o chargig reversely while ight. Ad over-charge, limited chargig curret &voltage protectios for battery Equipped with system abormal status alarm fuctio Users ca to adjust the system parameters by settig keys Equipped with data commuicatio fuctio (optioal) Be able to offer DC power supply (optioal) Day ad ight double processig mode Wall moutig type is easy to istallation
10000 Watt AC to AC Hybrid Load sine wave converter Technical Features: * Using the fifth efficient IPM power module from Mitsubishi with stable performance and high efficiency. Its service life could reach 15-20 years. * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements. Technical Data Model BZT-10KW Isolation Low Frequency Transformer AC Input Input rated voltage(VAC) Single phase 220V Input rated current(A) 45.4A Input voltage range 110/120/220/230/240Vac optional AC Output Rated AC output power 10KW AC output waveform Pure sine wave Phases Three phase, 4 wires Output rated voltage 380VAC ±3% Output rated current(A) 15.1A (per phase) Output voltage range 380/400/415/440/480Vac optional Output Frequency 50Hz/60Hz±0.05Hz Power Factor(PF) 0.9 Overload Ability 150%, 10s Efficiency >93% Waveform distortion rate (THD)
18kw 380VAC Output Solar Pump System Power Converter Solar Pumping System Introduction: Bangzhao Solar pump system consists of the specialized pump inverter for PV, water pump and solar panels. This device widely used in domestic water, irrigation water, control of desert, animal husbandry, water supply for Sea Island, water treatment projects, etc. Water storage replaces battery and directly drives pumping, with high reliability, at the same time, it can reduce system cost and maintenance costs. Product Features 1, Adopting the proposed dynamic VI maximum power point tracking (MPPT) control method & optimized SVPWM; fast response and stable operation; and the conversion efficiency achieves of 99.6%. 2, Adopting high-efficiency IPM (intelligentpower module) from Mitsubishiwith high reliability and high efficiency. 3, Designed with variable frequency driver (VFD), can be used in variable frequency speed regulation technology, greatly improves efficiency, and better to protect water pump and maximum utilizationof solar panels. 4, AC drive function. When is no sunshine, such as at night, solar pump inverter can connect to AC city power to work by manually if AC power is available. 5, LCD display operating panel, can setting various parameters through LCD, easy to operation. 6, Complete protection function for PV input under voltage, PV input over voltage, input connection Reverse Polarity, DC over current, output, over load, short circuit, dry Well, overflow, dry running, and blocking protection.
Product Features 1, Adopting the proposed dynamic VI maximum power point tracking (MPPT) control method & optimized SVPWM; fast response and stable operation; and the conversion efficiency achieves of 99.6%. 2, Adopting high-efficiency IPM (intelligentpower module) from Mitsubishiwith high reliability and high efficiency. 3, Designed with variable frequency driver (VFD), can be used in variable frequency speed regulation technology, greatly improves efficiency, and better to protect water pump and maximum utilizationof solar panels. 4, AC drive function. When is no sunshine, such as at night, solar pump inverter can connect to AC city power to work by manually if AC power is available. 5, LCD display operating panel, can setting various parameters through LCD, easy to operation. 6, Complete protection function for PV input under voltage, PV input over voltage, input connection Reverse Polarity, DC over current, output, over load, short circuit, dry Well, overflow, dry running, and blocking protection.
50kw Three Phase 50Hz-415VAC Output off Grid Power Converter for Industrial Use Load AC Motor Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements.
Professional Solar Energy PV arrany combiner box Description PV combiner box is used to bring together the output DC current of the PV array. It will combine the same solar panels which in series to form a PV Array ,supporting the use of photovoltaic grid-connected inverter, so as to constitute a complete photovoltaic system, with the city electric grid. Summarize BPVB series PV Array Combiner For a large-scale grid-connected PV system, it is a general practice to install a DC combining device in between the PV modules and inverters for the sake of minimizing the cable distance between them, facilitating maintenance and improving reliability. With many years of PV grid-connected system design experience, our BPVB PV array combiner box series is specially-designed for meeting the need of high performance and high reliability of PV systems. In combining with our Solar Access inverters, Bangzhao BPVB provides a turnkey solution for PV power plant systems. By using PV array combiner box, according to the input voltage of the inverter, Clients can connect a fixed number of similar PV modules to form a PV array. Then different strings of PV array can be converged into the PV array string box. After that, together with lightning arresters and circuit breakers, it is connecting to the inverter to reduce the system installation time and increase the system safety.
Two Phase Output Sine Wave Power Inverter for Hybrid Load Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements.
We can make products according to your requirements. 1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of the load. 2, The output frequency can be set, this function is very convenient for customer. 3, The output voltage can be set between +20 % to -40 % of rated voltage. It's a great convenience to users. 4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly. 5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage. 6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 7, Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. 8, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-500V or 200-850V. 9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.
VDC High Efficiency and Low Price off Grid Solar Power Inverter Bangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply. The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave. We can make products according to your requirements. Technical Features: 1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of the load. 2, The output frequency can be set, this function is very convenient for customer. 3, The output voltage can be set between +20 % to -40 % of rated voltage. It's a great convenience to users. 4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly. 5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage. 6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 7, Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. 8, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-500V or 200-850V. 9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.
Using the fifth generation lntellingent Power Module from Mitsubishi, Improve the system efficiency higher High conversion efficiency Advanced technology for maximum power point tracking(MPPT) (>97%)MPPT efficiency Wide input voltage range High reliability due to compltte protection function Powerful communication interfaces Easy operation and installation Easy-to-set multilingual LCD display Adjustable protection / operation parameters ModelBZS-1000W Isolation typeTransformerless DC InputMPPT Voltage RangeDC100~500V Max. DC Voltage550VDC Start Voltage180V Recommend PV Array Open Circuit Voltage200~400V Control SystemMPPT Number of MPPT Tracker2
25kw 3 Phase AC 380V Variable Frequency Drive Inverter Bangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply. The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave. Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
3 Phase off-Grid Pure Sine Wave Inverter Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made. We can make products according to your requirements.
