Apc pure sine wave inverter is the latest model presented by yiyuan electric co., ltd.. Developed on the base of our previous psw 7 series, the apc charger has achieved significant improvements on battery charging, ac transfer, etc. By adopting dip (dual in-line package) switch, the apc pure sine wave inverter provides more smart options for users to customize the performance of the device. Features of apc pure sine wave inverter, charger 1. High overload ability of our apc charger is up to 300% rated power(20 sec.). 2. Apc pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10w(3s sensing cycle)/3w(30s sensing cycle) *. It can extract max. Power from various batteries with different protections, and low voltage trip can be selected (9.5v/10v or 10v/10.5v). 3. Uses pfc(power factor correction) for charger, which has less power consumption than conventional units. 4. It has 15s delay before transfer when ac resumes, and overload protection when our apc pure sine wave inverter equips with generator. 5. 10ms typical transfer time between battery and ac, which guarantees power continuity of apc charger. Uses selectable input ac voltage (184-253v or 154-253v) for different kinds of loads. 6. Our apc charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90amp**. 7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries. 8. Lcd status display, battery/ac priority switch, usb communication port are available for our apc pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too. Note:*for 1kw one. **for some models. 18kg 520*315*300mm
General purpose inverter: KE200,KE300, KE600 series; Power rating: 0.4KW to 1200KW Voltage: 220V to 660V Control mode: V/F control, open-loop vector control & close-loop vector control Different power rating with different packing.
Non-isolated( transformerless) Max input power(dc):3600w Max dc input voltage:600v Trigger voltage: 420v dc Mppt voltage range¡êo350~600v dc Rated input current(dc):10a Max input current Dc input channels¡êo 2 Rated ac output power:3000w Max ac output power:3300w Rated grid voltage: 230/240v ac Grid voltage range:195.5~270 ac Max output current: 15a Rated grid frequency: 50/60hz Display 1 lcd, 2 led Thd&3% Power factor>99% Direct current injection
125v sequence of events (1c31157g02) External power pulse accumulator (1c31150g03) 24v/48v sequence of events (1c31157g01) 125v sequence of events (1c31157g02) 48v on-card contact wetting soe (1c31157g03) Rtd (1c31161g02) Rtd (1c31164g02) Link controller rs232/rs485 (1c31166g01) Rs232 link controller (1c31169g01) Rs485 link controller (1c31169g02) 0-10v ai; 0-10v ao loop interface (1c31174g01) 0-5v ai; 0-10v ao loop interface (1c31174g02) 0-20ma loop interface (1c31174g03) 0-5v electric drive (1c31174g04) Voltage ao loop interface (1c31177g01) Ma local shield loop interface (1c31177g02) Ma remote shield loop interface (1c31177g03) Master - attachment unit electronics (1c31179g01) Master - attachment unit electronics (1c31179g02) Master - attachment unit pmod - 2n (2km) (1c31181g01) Master - attachment unit pmod - 4n (2km) (1c31181g02)
Dxa-6300 -480 960021-02 Dxa-480 dx-480 850021 Dxa-6300 Dxa-8200 Dxa-8300 Dxa-8400 dx-8400 960080-03 Dxe 450 Dxe-208c dxe208c Dxe-208c dxe208c Dxe-316w Dxe-316wb Dxe-4120w 960128-01 a4 Dxe-450b Dxe-455w 960100-01 Dxe-480 Dxm-208 960105-06 Dxm-208 960105-16 Dxm-208c Dxm-308 Dxm-316 Dxm-316c 870360-56 960098-47 Dxm-316w 960098-10 Dxm-316w pg90-020 Dxm-316wb Dxm-340c Dxm-340c 960099-03 Dxm-340c 960099-03 a5 Dxm-340cb Dxm-340w Dxm-4120cb Dxm-4120w Dxm-455c Dxm-490c Dxm-490w Dxm6120 dxm-6120 Dxm-6200 Dxm-71208 Dxm-8200 Dxm-8400 Dxm-8400b 861120-00 Eb-202 Eb-202-00-00 Eb-203-00-000 Ecs-001.5 Ecs-050 Ecs-060 Ecs-15 810503-15 Ecsc-015 Ei-203-00-000 Ei-205-00-000 Eio-005 En-204 en204 En-204-00-000 En-204-00-000 960500-06 En-208 En-208-00-000 en20800000 En-214 Ep202-p00-en00 Ep202-p00-en00 Fm-2 Fm-3dn Fx-208 Fx-208 960135-01 Fx-208 fx208 Fx-316 Fx-316 fx316 401159-01 Fx-340 Fx-340 fx340 Fx-4120 Fx-4120 fx4120 Fx-455 Fx-455 960134-01
KJ2004X1-BA1 Remote Interface Unit
Continuous power: 1000w peak power: 2000w input: 12/24vdc output: ac 220v10% output frequency: 50hz+2hz/60hz+2hz efficiency: ;98% wave form: pure sine wave
Continuous power;3000w peak power: 6000w Input: 20-30v Output: ac 110v/220v output frequency: 60 hz efficiency: 95% wave form: modified sine wave convert: dc 12v to ac 220v reverse connect: blown fuse. Package : size: 430*200*100mm Nwt: 5000g gw:6000g
* using the fifth efficient ipm power module from mitsubishi * high conversion efficiency, max. Efficiency¡ý92% * perfect protection and warning functions * low frequency transformer, which ensures that inverter has high efficiency and low no-load loss. * pure sine wave output, has higher efficiency and higher capability of driving load. * lcd display, small size, high efficiency, easy installation. * european CE certification and australian CEC listed.
* using the fifth efficient ipm power module from mitsubishi * high conversion efficiency, max. Efficiency¡ý92% * perfect protection and warning functions * low frequency transformer, which ensures that inverter has high efficiency and low no-load loss. * pure sine wave output, has higher efficiency and higher capability of driving load. * lcd display, small size, high efficiency, easy installation. * european ce certification and australian cec listed.
For CNC, textile machine, printing machine, packaging machine, we usually use more than 1 motor in 1 machine. But the common servo drive in the market can only run 1 servo motor. Therefore we need such a servo drive which can run 2 motors together. Now it is launched. Whats more, it will save your cost and mounting space sharply! Its very suitable for CNC lathe machine, or other 2-axis machine. HSV-162A uses the latest Digital Signal Processor (DSP) for motion control, Complex Programmable Logic Device (CPLD), and Intelligent Power Module (IPM). It features small size, easy installation, and easy commissioning. HSV-162A takes full use of processing chips and saves installation space. It is the preferred feed drive for your economical CNC machines. Five control modes: Full state display capability Alarm memory capability Customized input and output signal Wide range of speed regulation ratio Integration of main circuit and the input power supply of the control circuit Small size and easy installation AC servo drives and motors- Which is compatible with SIEMENS, FAGOR CNC controller, and all the types of PLC. Dual-motor servo system Its very suitable for CNC lathe machine, or other 2-axis machine, save much cost. Servo system for AC380V power input lower current, and higher torque, free of transformer. Standard packaging.
DNV360/DNV310/DNV300 series inverter is a high-quality, multi-function vector control inverter. Flux through the motor current and torque current decoupling control, to achieve a rapid response and accurate torque control, high precision operation for a wide range of speed and torque control. The new hardware platform, scientific production technology and self-developed special debugging testing equipment to ensure the product more stable and reliable in below applications. Metallurgy, petroleum, chemical, textile, electric power, building materials, coal, medicine, food, paper, plastics, printing, lifting, cable, washing, water, heating, sewage treatment and other industries, machinery and equipment for: drawing machine, mixer, extruder, slitting, winding machinery, compressors, fan pumps, grinders, conveyors, hoists, centrifuges, and a variety of mechanical speed. Low frequency 180% large torque 3-hall hardware protected Waves current limit. Over-load, over-torque protection. Extensive expansion and interface Rich industry application of expansion card 11 digital input / 4 digital output 2-way AD/ 2-way DA Digital voltage/ pulse given/ rotary encoder Powerful communication function Drino standard Modbus Optional industrial application Modbus SAE 1939 of HEVBUS CAN Siemens Pribus DP A key shuttle double-keyboard control Local/ Remote Multi-language text display 8 group of control parameters storage Application filed: Metallurgy, petroleum, chemical, textile, electric power, building materials, coal, medicine, food, paper, plastics, printing, lifting, cable, washing, water, heating, sewage treatment and other industries. Machinery and equipment for : drawing machine, mixer, extruder, slitting, winding machine, compressors, fan pumps, grinders, conveyors, hoists, centrifuges, and a variety of mechanical speed.
Introduction: The I-P-PPI 1000W design of pure sine wave inverter are ultimate choice of appliances demand a clean, pure source of AC power.This inverter is a high conversion efficiency model and continuous working module generating a sinusoi-dal wave from a 12/24V/48V - battery bank, which can supply energy to various loads such as resis-tive load (heater),inductive load (air conditioners, refrigerator),motors (vacuum cleaners), and rectifier load (computer). It is compatible with optional accessories such as the Remote ON/OFF Control unit and the selectable sockets. Application: Designed for a variety of applications such as residential, commercial, emergency and vehicles, constructi- on and solar & wind system etc. Product Features: 1. Low voltage input model adopt original imported IR MOS tube.The current is 5.5 times of rated current. 2. It low voltage input connection adopt high frequency low resistivity electrolytic capacitor. How- ever ordinary capacitor will explode if the temperature become very high. 3. Every transformer has independent fuse protection.If there is a MOS tube break down,then the fuse will break fast.So that will not effect other MOS tube to break. 4. All the protection signal adopt monolithic processing.Circuit is simple and stable. 5. Input and output are isolated to ensure the operation stability 6. Output circuit adopt convertible circuit.The SPWM signal produced by Single Chip Microcomputer drive the A3120 optical coupler.Then the optical coupler isolated drive the output through IGBT tube.Adopt negative pressure to cut off IGBT to eliminate Miller effect,so the output is more steady. 7. The whole design adopt patch technology.The circuit is simple and steady. 8. Optional remote ON/OFF control switch; 9. Smart protection function with LED and alarm show. Protection: Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Battery reverse polarity protection. 420MM*203MM*90MM 4.1KG.
Top Level Quality Pure Sine Wave Inverter With battery charger & UPS I-P-TPI series CPU intelligent management, Latest American technical inverter, Adopted best electric components, stable quality, long-life The high conversion efficiency ( 87%-98%) Low power consumption,1W~6W under sleep state. I . Introduction This power inverter series is a member of the most advanced line of mobile AC power system available. This design combines the advantages of top class inverters in the world global market and adopts latest American low frequency circuit design. The features are high conversion efficiency, high performance and lowest consumption. The models range from 1000W-6000W. II . Application: It supplies reliable pure sine wave power for various loads in various fields. This design is special for using in solar & wind system with excellent conversion efficiency. Application loads: various loads such as resistive load, inductive load, motors and rectifier load, like team ship, truck, industrial equipment, air conditioning, television, cash register, refrigerator, computer, electric power tool etc. Application fields: It can be used in every field, such as business, working station, home, industry fields etc. III. Production Functions: 1. DC/AC Conversion Function: With advanced conversion technologies, the machine owns strong overload ability, high conversion efficiency. It is suitable for high demand industry, such as manufacture, energy industry and so on. 2. High-power Intelligent charging function: 1). It can charge for all kinds of batteries. For more details please check the parameter of the product. Remarks: standard matched battery is free maintenance lead-acid battery. If lithium battery, we need to reset the parameter of the inverter according to the specification of customers' battery. 2). The maximum charge current for DC 12V input is 40A, for DC 24V/48V is 70A.It can be adjusted by the users. The charging process can be divided into three stages. Stage I: With largest constant current charging, this can improve the backup power. Stage II: Constant voltage charging to charge batteries gradually, then there is enough time for batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be avoided. Stage III: When the batteries are fully charged, the output of inverter will turn into float voltage to maintain full power state of batteries for a long time. Meantime, it would auto detect the battery power, and stop working for saving electricity after finished charging. 2. UPS Function: When this inverter connected with batteries and utility, it is made up of UPS system, which can make sure the loads keep working after the utility cut off suddenly. Step 1: When utility power is available, it will output directly after stabilizing voltage and charge batteries simultaneously. Step 2: When utility power cuts off, the system will convert DC power to AC power automatically to ensure uninterrupted power supply within 4ms. Step 3: When utility power comes back, the system will turn into utility power supply automatically and charge batteries simultaneously. 3. Sleep Function: No load power is between 1W-6W when on sleep mode and only the chip works. This inverter will automatically loop detection under the sleep mode, when the connected loads power more than 30W, the system will automatically start to work and turn into normal mode within 20S for providing power to the loads; when the loads power less than 30W, the machine will back to sleep mode automatically within 20S.This can largely reduce the waste of electricity .It is a special design for saving energy. 4. Products Features: 1. Pure sine wave output. 2. Built-in transfer switch automatically transfers between inverter power and incom- ing AC power. 3. CPU management, intelligent control, module design. 4. LEDs display function; 5. High conversion efficiency (between 87%-98%)/ low no load consumption. 6. Can match with all kinds of batteries, such as sealed lead acid battery, open lead- acid battery, gel battery and kinds of lithium batteries. 7. Three-step intelligent charging mode available. It charges all kinds of batteries intelligently. And the maximum charging current is adjustable. It also can be used as a charger. 8. This series inverter is also called dynamic inverter according to the advantage of strong overload capacity. For example, 1KW model can drive 1P air conditioning, 2KW can drive 2P air conditioning,3KW can drive 3P air conditioning etc. 9. With adopting latest American low frequency circuit design, and new electric materials, the whole system is more stable, low malfunction rate, long-life.It is no problem to use for more than 5 years under the normally use. 10. 3-year warranty plus life-time service. 5. Protection: High voltage protection Under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection 6. Parameter: I-P-TPI series Model 1000W 2000W 3000W 4000W 5000W 6000W DC input DC12V/ DC24V/ DC48V Optional DC 24V/DC48V Optional Utility Model Specifications Input Wave Type Sinusoid (utility or generator) Nominal Input Voltage AC 100V/110V/220V/230V/240V ( Optional) Input Voltage Range AC75V~135V or AC184V~AC253V Nominal Input Frequency 50Hz or 60Hz (Optional) Input Frequency Range 47+0.3Hz~55+0.3Hz 50Hz or 57+0.3Hz~65+0.3Hz 60Hz ; Output Wave Type Same as the input wave type Overload Protection Circuit breaker startup Short Circuit Protection Circuit breaker startup Power Efficiency >98% Transfer Current 30A Transfer Time (Ac to Dc) 4ms Transfer Time (Dc to Ac) 4ms Bypass switch current YES Max Overload Current of Bypass 30A Inverter Mode Specifications Rated Output Power (W) 1000W 2000W 3000W 4000W 5000W 6000W Power Factor 1 (Sufficient output power) Nominal Output Voltage (V) 100V/110V/220V/230V/240V AC(Optional) Nominal Output Frequency (Hz) 50Hz 0.3Hz or 60V , 0.3Hz Output Voltage Range 5% Efficiency 87%~98% Over-Load Protection (110%
Digital Control Technology--LCD Display Low frequency pure sine wave inverter - single-phase interactive uninterrupted power supply- high quality Function: 1, Auto Voltage Regulation(AVR): When utility power is unstable, this machine owns precise and stable voltage output function. For example, in China, the utility voltage can drop to 190V at peak demand, but the output voltage of this machine is 220 V, 3% V, 50 Hz, 0.5, which can help to protect electrical equipment. 2, DC/AC Conversion Function: When the utility power fails suddenly in the home, office, supermarket and industrial zone etc, it can be an environment-friendly engine; in some outdoor areas without electricity, it can be used as Mobile Power and provide AC power for household appliances. 3, Intelligent Charging Function:. When batteries run out of power, inverter can be connected to the utility and automatically charge the battery. When connected with utility and battery, it could be used as a UPS system and will charge batteries automatically when connected with utility, The charging process can be divided into three sections. Section I: With largest constant current charging, this can improve the backup power. Section II: Constant voltage charging to charge batteries gradually, then there is enough time for batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be avoided. Section III: When the batteries are fully charged, the output of inverter will turn into float voltage to maintain full power state of batteries for a long time. 4. UPS Function: When this inverter connected with batteries and utility, inverter will start its UPS function. The output UPS of the inverter can be choose as AC first(utility comes first) or DC first(DC power first).The transfer time is less than 5 milliseconds. Features: 1, Pure sine wave AC output; 2, Intelligent program control, CPU management; 3, With LCD display, users can know operation status of the whole system clearly; 4, With multi-functions, extra charger is not needed and electric appliances can be protected (AVR, UPS); 5, Wide applicable scope, can be wide used for all kinds of occasions, such as outdoor area without electricity, industrial area, household, office, supermarket, hospital, bank, solar system, wind energy systems etc; 6, With external battery connection, its convenient for users to expand use time and back-up power time; 7, With super load carrying ability and high load capacity, this inverter can not only carry resistance load; but also can carry various kinds of inductive loads, such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp, etc; 8, With high quality, low frequency circuit design, stable system, low failure rate and long service life normally under proper operation, this machine can last more than 3 years; 10, Approvals: CE / EMC / LVD/ RoHS ; 11, Two years warranty, lifelong technical supports. Technical Specification: I-P-XD-15000VA Rated output capacity(Full Power) 10000W Peak Power 20000W Battery voltage(DC) 96V or 192V (Optional) AC Input Voltage(AC) 220V, 35% or 110V+35%(Optional) Frequency 50Hz, 3% or 60Hz, 3% Output(AC) Voltage 220V, 3% or 230V, 3 or 240V, 3% or 100V, 3% or 110V, 3% (Optional) Frequency 50Hz, 0.5 or 60Hz, 0.5(Optional) Charge Battery Charge circuit 0~25 A Charge time By the capacity of battery Battery protection Automatic self-test. charge and discharge protection Display Mode LCD Information Input voltage, Output voltage, Frequency, Battery capacity, Load capacity State parameters Output wave type Pure sine wave (Waveform distortion 3) Overload capacity 120% 60s,130% 10s Inverter efficiency Average 90% Transfer time 5ms Communication port RS232 Protection function Output overload protection, Output short-circuit protection, Battery reverse polarity protection, Input high-voltage protection , Input low-voltage protections, Overheat protection; Using environment Temperature -10 ¡«60 Humidity 10%¡«90%,Non-condensing Altitude 4000m Size W, D, H(mm) 570*265*600. Packing size W, D, H(mm) 660*350*750 Net weight (kg) 78 Gross weight (kg) 88=78+ 10 (wooden case).
ABB standard drive acs550 0.75kw to 355 kw - driveit low voltage AC drive. The abb standard drive is simple to buy, install, configure and use, saving considerable time. The drive has common user and process interface with fieldbus, common software tools for sizing, commissioning, maintenance and common spare parts. The abb standard drive can be used in a wide range of industries. Typical applications include pump, fan and constant torque use, such as conveyors. The abb standard drive is ideal in those situations where there is a need for simplicity to install, commission and use and where customising or special product engineering is not required.
1.Main Features: a. Durable construction for long life under extreme environmental conditions b. Low idle current (less than 1 watt) conserves energy when no loads are present c. power Inverter has soft start capability for starting heavy loads d. Built-in starting control circuits for two- and three-wire generator starting systems e. Simplified controls with a snap-on cover that protects settings from being accidentally changed f. Better thermal performance allows full output power to 50¡ãC (122¡ãF) without de-rating g. High surge capacity starts more difficult loads and handles overload conditions reliably h. Durable powder coated, corrosion resistant steel chassis i. New digital display shows kilowatts (kW) when inverting and amps (A) when charging, plus incorporates a robust ON/OFF switch and status indicators j. 70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance. 2. Protection Features: A. Battery over voltage and under voltage protection B. Over temperature protecton C. Automatic overload protection D. Short circuit protection. F.pure sine wave inverter g. pure copper transformer h.1kw to 6kw available i. low frequency inverter j. huge charge current k. support solar system, generator.
1.Advanced MPPT technology 2.Fully automatic three-stage charge control 3.High efficiency up to 99% 4.High reliability with extensive electronic protections 5.Data logging and networking capability 6.Non-fan design, natural convection.
1.Compact and lightweight design for ease of installation 2.Transformer-less technology with maximum efficiency over 97.4% 3.Aluminum housing with IP65 industrial protection against harsh environment. 4.High reliability with full protection functions. 5.Wide range of DC input and MPPT voltage. 6.Integrated DC switch for PV panel isolation. 7.Certified grid-connection operation according to local standards. 8.RS485 and optional of Ethernet/USB/Wireless communication. 9.Non-fan design
Technical Data Rated Output Power 2500W Peak Output Power 5000W Stackable Max. 10 Units In Paralles (20000W) DC Input Voltage 12V 24V 48V AC Output Voltage 100V / 110V / 120V / 220V / 230V / 240V AC Output Frequency 50Hz / 60Hz AC Output Wave Form Modified Sine Wave Converting Max. Efficiency >85% >90% >92% DC Input Voltage Range 10V~15V 20V~30V 40V~60V Input Low-Voltage Alarm 10.5V,0.5V 20.5V,0.5V 41V,0.5V Input Under-voltage Cut-Off Voltage 10V,0.5V 20V,0.5V 40V,0.5V Input Over-voltage Cut-Off Voltage 15V,0.5V 30V,0.5V 60V,0.5V No Load Current
