Promotional item, gifts.
Product Information: Above-average ENplus quality! Our pellets are ENplus certified. In terms of abrasion, ash content, fine particles, and heating value, they exceed the minimum requirements of the quality standard. The standard values are intended to ensure high product quality, good heating performance, and a stove-friendly combustion. This way, you can heat energy-efficiently because your stove runs smoothly and you need fewer pellets. The ENplus values in detail: Lower heating value over 4.8 kWh/kg This is the most important value for you, as the higher the lower heating value, the greater the maximum usable amount of heat generated during combustion. The wood pellets we offer have a lower heating value of over 4.8 kWh/kg â?? the ENplus standard requires 4.6 kWh/kg. This value is important because only the lower heating value measures the actual energy content of your pellets! Many manufacturers and retailers indicate the upper heating value on the packaging, which is always higher than the lower heating value but does not provide any information about the actual energy content of the pellets during combustion. Abrasion under 0.6% The ENplus standard for abrasion is 2%, which corresponds to a mechanical strength of 98%. This means: The lower the abrasion, the more stable the pellets. Our offered pellets have an abrasion of 0.6% and a mechanical strength of 99.4%, which is significantly better than the standard. This means that less dust and fine particles are produced during combustion. Ash content less than 0.4% ENplus certified pellets may have an ash content of 0.7%. This refers to the amount of ash that remains after combustion. The ash content of the offered wood pellets is a maximum of 0.4%, making it particularly low and gentle on your stove. Almost dust-free with a fine particle content of 0.05% The bagged product is almost dust-free because it has only a fine particle content of 0.05%. This is well below the ENplus standard upper limit of 0.5%. Fine particles are defined as pellets smaller than 3.15 mm. If this proportion is too high, deposits can form in the stove, affecting heating quality. Optimal moisture content The pellets from Dorr Biomass Farm have a moisture content of 6.9 to 7.1%. This is optimal because a higher moisture content reduces the heating value of the pellets during combustion and produces more soot. The ENplus standard therefore allows a maximum of 10%. If the moisture content is too low, pellets burn too quickly and do not heat efficiently.
Marble, granite, stones, slates, tiles, power cord, wires, cables , cable assemblies, tyre scrap, used tyres, steel tire wire scrap, firewoods, pistachios, hazelnuts, textiles.
.Boat owner
.Hotel accommodation, lodging
Ppf2 Face Masks.
Thermo roll paper, office and school materials.
SPA finished for 300 mil boxes Vglove 6,3$
We offer : Logs: Oak - 30cm - 50 cm, 3m+ , price : 230 eur /m3 Beech - 30cm - 50 cm, 3m+ , price : 165 eur /m3 Poplar - 30cm - 50 cm, 3m+ , price : 130 eur /m3 Boards: Dried oak boards - 2.5/3cm x25/30 cm x 2m+ , price : 850 eur / m3 Firewood in pallets : Beech 2rm , price : 100 eur / pallet Oak 2rm , price : 80 eur / pallet Payment terms : 50% t/t , 50 % t/t against shipping documents or 100% at sight We also provide inspection in logistics ; 1. Checking documentation and goods that you have purchase , measurement , quality etc.. Fees : 140 eur / per truck or container Service provided in : croatia, bosnia, serbia
D2 oil (Diesel)
School Book And Notepad Covers
Folders For Car Documents
High Quality 3ply Surgical Masks and KN95 face masks..
Dear Buyers, We are located in Croatia and we have a stock of 4 000 000 3ply masks with extra soft ear-loop and the edge of the mask what provides better comfort when using for a longer time at once. Masks are certified and they are high quality. (CE, ISO, FDA, RICOTEST) 3ply masks come in packages of 50 pieces and we can offer you unique price of 0.32 - 0,39USD per mask depending on the quantity. Transport to most countries of EU is included in price. If you are located outside EU we are able to cover some of the shipping costs. On stock we also have 10 000 KN95 face masks. If you are interested or you have some question feel free to contact me.
Three-layer waterproof mask with elastic ties. The layers are made of polypropylene (non-woven) textiles with different thickness and density. Pack of 10 pieces. The minimum order is 1 pack. In accordance with Directives 93/42 / EEC and EU / 2007/47. The country of origin is Turkey.
Mask KN95/FFP2, made in China. CE certificate. QTY 1000.000. MOQ 100.000.
Euronda Monoart surgical mask 3 layers certificate available QTY: 30.000 MOQ: 10.000 ETA: Ready stock
MacoPharma FFP2 mask Certificate available QTY: 200.000 MOQ: 50.000 ETA: 3 days
Surgical mask 3 layer - no certificate QTY: 40.000 MOQ: Take all ETA: Ready stock
Respiratorna MASKA ( SIFRA:3436) FFP2 NRD / CE0121 - Certificate not available. EN 149:2001+A 1:2009 EAN: 3872667000986 Qty:28.008pcs Ready stock (Bosnia)
