Model: TP25A Capacity kg: 2500 Load Center mm: 600 Turning Radius mm: 1608 Max. fork Height mm: 205 Min. fork Height mm: 85 Fork Length mm: 1150 Fork Width mm: 680 Driving Motor v/kw: 24/1.2 Lifting Motor v/kw: 24/0.8 Run Speed (Load/Unload) km/h: 3.6/5.4 Lift Speed ( Load/Unload ) mm/s: 22/32 Lower Speed ( Load/Unload ) mm/s: 50/55 Grade Ability ( Load/Unload ) %: 8/10 Battery v/Ah: 24/210 Charger v/Ah: 24/25 Overall Length mm: 1781 Overall Width mm: 690 Overall Height mm: 1305 Net. Weight kg: 524. Packed with pallet.
Model: TC250, TC450 Capacity kg: 2500, 4500 Lifting Motor V/kw: 24/1.2, 24/1.2 Drive Motor V/kw: 24/1.5, 24/1.5 Drive Speed km/h: 3.0/4.5, 3.0-4.5 Battery V/Ah: 24/210-240, 24/210-240 Overall Length mm: 2520, 2660 Overall Width mm: 1850, 1950 Overall Height mm: 1385, 1385 Net. Weight(Excluding battery) Kg: 424, 480. Packed with plywood case.
EOT cranes are designed according to the specification of the customer. Depending upon the "span" of the crane to "bay length" of crane. Application of cranes is also very important factor in designing these eot crane. According to application & technical parameters these eot cranes are designed These are divided into four standards: * SGIB crane: single girder i beam crane * SGBT crane: single girder box type crane * DGIB crane: double girder i beam crane * DGBT crane: double girder box type crane Each crane designing depends upon tonnage, span, lifting height & application of crane. According to the wight & size of the product.
2 post parking lift, lift capacity 3000kg, lift height 2160mm. 20'' container 12 sets, 40'' container 18 sets.
2 post lift electrical lock release, capacity 4000kg, lift height min 95mm, max 1900mm. 20'' container 24sets, 40'' container 36sets.
Model GM750 Engine Rated Power Kw 45 Kw 61.2HP Rotating Speed 2500 rpm Noise In Cab ≤ 92 dB Out of Cab ≤ 106 dB Hydraulic System Cycle Time (s) Raise Dump Lower 3.5-4.5 2-2.5 3-3.5 Performance Operating Load 750Kg Bucket Capacity 0.55m3 Max lifting force 1610 Kg Speed 0-11.2Km/h Operating weight with standard bucket 3520Kg Tyre 12-16.5 Dimennsion: Model GM750 model GM750 Max height 3900mm overall length to outside of tyre 1980mm Dump height 2200mm Ground clearance 190mm Height to top of cab 2300mm Clearance circuit front 2200mm Overall length with bucket 3500mm Dump angle at max height 45° Dump distance 640mm Max attachment rollback when on groud 31° Overall length without bucketmm 2800mm. Angle of departure 20. 2pcs/20'GP, 4pcs/40'GP.
1.Rated capacity (kg): 2,000 2. Max lifting height (mm): 4,000 3. Diesel engine: Weichai, Changchai or according to customers¡¯ requirements. 4.Weight distribution with load front/rear (kg): 4775/635, 5525/745, 6500/870, 6925/1035 5. Internal combustion engine displacement: 2.54 L 6. Internal combustion engine fuel tank capacity: 52 L 7. Total weight ( kg) : 3200 8. Service brake: Hydraulic-foot pedal, 9. Parking brake: Mechanical-hand lever 10.Battery voltage ( V): 12/100/20h 11.Tilting angles ( forward-backward): 6¡ã/12¡ã 12.Loader center: 500 mm L:2650mm W:1300mm H:2110mm
1.Rated capacity (kg): 3,000 2. Max lifting height (mm): 4,000 3. Diesel engine: Weichai, Changchai or according to customers requirements. 4.Weight distribution with load front/rear (kg): 4775/635, 5525/745, 6500/870, 6925/1035 5. Internal combustion engine displacement: 2.54 L 6. Internal combustion engine fuel tank capacity: 52 L 7. Total weight ( kg) : 4350 8. Service brake: Hydraulic-foot pedal, 9. Parking brake: Mechanical-hand lever 10.Battery voltage ( V): 12/100/20h 11.Tilting angles ( forward-backward): 6/12 12.Loader center: 500 mm L:2600mm W:1300mm H:2140mm.
Tower crane. 40' container
Crane Models : Tadano TL250E, TL300E, TG450E, TG500E, TG550E, TG600E, TG800E, TG1000E, TG1200E Kato NK160, NK250E, NK350E, NK400E, NK500E, NK800E, NK1000E, NK1200E
EOT cranes Export Packing
Crawler crane "aska crane" is mini crawler cranes with lifting capacity of 1.7t, 2.8t, 3.0t (now remodeling) and 4.9t(will be available in 2009), manufactured by our affiliate company, r&b engineering co., ltd. In 2007 october, r&b engineering co., ltd. Was established and inherited a development and production technology from a Japanese pioneer mini crawler crane manufacture, �gtoa corporation�h. Model list Ntch174 - 1.7t petrol Cr285g - 2.8t petrol Cr285d - 2.8t diesel
Model: SA-40 1.Capacity: 4000 KG 2. Double hydraulic cylinder 3. Max Lifting Height: 1900mm 4. Minimum Lifting Height: 85mm 5. Current Price: US$ 765/set, FOB Shanghai 6. Power Pack: 220-240V/50Hz/60Hz/1Ph; 380-415V/50Hz/3Ph 7. Asymmetric arms: Short: 712-1051mm Long : 992-1462mm 8. Standard Color: Blue column / Yellow carriage and arms 9. Delivery time: 18-25 days 10. Warranty: 12 Months. Load quantity: 1X20GP/24 sets.
Load capacity: 3000kg Load center: 500mm Max. lifting speeds (full load): 400mm/s Max. driving speeds: 18/20km/h Drawbar pull: 10,000N Gradeability: 15/20% Lifting height: 4,500mm Free lift: 1270mm Tilting angles (forward - backward): 6 / 12 Min. turning radius: 2,700mm Angle stacking aisle: 2,550mm Min. under-clearance: 135mm Overall length: 3,820mm Overall width: 1,228mm Overall height (with mast retracted): 2,110mm Overall height (with mast extended): 5,770mm Overall height to overhead guard: 2,120mm Wheel base: 1,700mm Front tread: 1,000mm Rear tread: 970mm Front tyre: 28x9-15 PR Rear tyre: 6.5 - 10 PR Total weight: 4480kg Fork width: 125mm Fork thickness: 45mm Backrest height: 1,195mm Fork length: 1220mm Engine model: 490BPG made in China, imported engine ISUZU 4JG2PE-01 optional Rate power: 37kW Rotate Speed at rate power: 2,650rpm Max. torque: 145N.m Rotation speed at max. torque: 1,800-1900rpm Power shift:Tor-con Packing Details:3 pcs/20CTN & 5pcs/40CTN. 3pcs/20'GP, 5pcs/40'GP.
Specifications: 1) load capacity: 3, 500kg 2) load center: 500mm 3) max. Lifting speeds (full load): 375mm/s 4) max. Driving speeds(with/without load): 18/20km/h 5) drawbar pull(with/without load): 14.5/9.8kn 6) gradeability: 18% 7) lifting height: 3, 000mm(2 stage mast with 3300mm, 3500mm & 4000mm;3 stage mast with 4.5m, 5m & 6m) 8) free lift: 80mm 9) tilting angles (forward - backward): 6 / 12 10) min. Turning radius: 2, 500mm 11) angle stacking aisle: 2, 110mm 12) min. Under-clearance: 135mm 13) overall length: 3, 800mm 14) overall width: 1, 230mm 15) overall height (with mast retracted): 2, 110mm 16) overall height (with mast extended): 4, 270mm 17) overall height to overhead guard: 2, 110mm 18) wheel base: 1, 700mm 19) front tread: 1, 000mm 20) rear tread: 970mm 21) front tyre: 28x9-15pr 22) rear tyre: 6.50-10pr 23) total weight: 4, 580kg 24) fork width: 125mm 25) fork thickness: 45mm 26) backrest height: 1, 225mm 27) fork length: 1, 070mm(1300mm, 1500mm &1800mm optional) 28) engine model: mitsubishi 4g64-31zg (made in japan)/ nissan engine for option, Guangqing gq-4y-df (made in china) 29) rate power: 37kw 30) rotate speed at rate power: 2, 650rpm 31) max. Torque: 153.7n.M 32) rotation speed at max. Torque: 1, 600rpm 33) packing details: 3 pcs/20ctn 5 pcs/40ctn. 3 pcs/20ctn 5 pcs/40ctn.
Introduce: Automatic transmission with high efficiency and productivity Combined axles with minimum turning radius and aisle width Low energy consumption, high stability, maximum visibility Minimum noise and pollution Wide-version mast with ergonomic design for high working efficiency. ---------------------------------------------------------------- The Battery-powered is our newly invented battery powered forklift. It has a high visibility range , has an automatic transmission, it easy to operate and easy to charge. Both AC powered and DC powered models are available. It is an ideal machine for conveying product.
Introduzca: They help operators work with maximum efficiency in narrow aisles; store and retrieve loads with precision and at unprecedented heights; and make your operations more productive than ever.
Heavy Duty Design Brake system: Integral electromagnetic disk brake mounted on motor shaft. Drive wheel: complete gear train mounted on ball and roller bearing in oil bath housing. High-torque horizontally mounted motor has copper graphite brushes for excellent fabrication. Load roller: Tandem Polyurethane.
Configures of T5 are so advanced and functions are so many that there is hardly not any other product in the field can exceed it.
4x2 truck mounted crane hp:336-440 Body longth:6000-8500mm. The product of us use the Renault tech frame, they have the most comfortable cab and reliable quality. Usually we equip the cummins engine, a very famous engine brand, to supply you good truck products.
