This load moment indicator is a tower crane safety system. It has the following functions: Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: í_ 95%/25 Combined error: 1% Power supply: AC220V (to be customized according to clients requirement) Parameter: Rated load, actual load, angle of the jib, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls. carton
his anti-collision device is a tower crane safety system. It has the following functions: CXT/800 system protection Tower crane Anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once anticipating the hook or cable of the higher tower crane may collide the jib or counter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site. The CXT/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accidents from happening. Pre-alarm/alarm and control CXT/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitive areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
Our company is able to provide various parts for series forklift trucks, and our parts are in high quality and competitive price. We can also give you the technical support.
The following is parts of our rims. We can produce the wheels according to your drawing. Rim 3.00D-8 3.50D-8 4.33R-8 4.00E-9 5.00S-9 6.00E-9 5.00F-10 6.50F-10 5.00S-12 5.50F-15 4.50E-15 6.00G-15.
Our company can produce many kinds of water pumps, as well as many band water pumps, such as the TCM, Toyota, KUMATSU. For that, our company can make this parts according to the customers requirements.
Forklift parts.
Forklift spare parts.
Forklift seat BF1 is economic driver seat specially designed for forklift ,truck,tractor.
Forklift seat bf2 is top quality driver seat specially designed for forklift, fork truck and other industrial vehicles. Two seat into one carton.
Four Ropes Orange Peel Grab is equipped for the crane which has two hoisting drums and it is an efficient tool for loading and unloading steel scraps, ore and clinker. The mechanical structure for opening & closing is succinct and original. It is easy to use and can work under any circumstances in order. Now the grabs are widely used in ports, vessel, mine, metallurgy, dump, and are exported in batches.
Wireless remote control grab is a new type single type opened in the air without any additional energy. It has the advantages of simple structure and good perform of rope grab and also the high productivity of the powered grab. It can be used in single hook crane and ship deck cranes. The grab is widely used in ship, port, railway station, factory, mine and other transport departments. Suitable for all type of bulk cargos like grain, fertilizers, cement, coal, barley, wheat, iron ore, sun flower seed, corn, maize, clay and etc. Manufactured in every capacity 3 cbm to 30 cbm with reducing capacity system. Supplied with removable spill plates, giving the capability to work light and heavy cargos with the one grab. Radio remote control unit gives facility to start or stop the grab with one button. Radio control unit will operate from 100 m distance from the grab. Work with oil circulation and battery.
Hydraulic clamshell grab is an efficient tool for loading and unloading sands, coal, mineral powder and bulk chemical fertilizer. The grab has hydraulic system itself, and the hydraulic system is imported from Germany, so it has high performance. It can work under any circumstances in order. The mechanical structure is succinct and original and it is easy to use. The scoop of grab is particular, so it easy to grab bulk materials. The grab has tie-in on the grab and it is easy to connect to the crane.
We are specialist in old as well as new model's godrel & voltas forklift spare parts with warranty in reasonable price. We also take annual maintaince of forklift truck's. Depends
Can supply forklift truck and spare parts, clutch disc, clutch cover, fly wheel, gear, charging pump, transmission pump... For the following model, Toyota: 1dz 1dz-ii 1z 2z 2j 2h 2d 4p 4y 4y-ii 5k 5p Komastu: 4d95 4d94e 6d102 4d105 4d95s 4d95d-1 4d95s-w 6d95l Mitsubishi: s4e s4e2 s4s s6e s6e2 4dq5 4dq7 4g15 4g33 4g52 4g63 4g64 Tcm: c221 c240 da220 da640 4bc2 4fe1 4fa1 6bb1 6bd1 4lb1 4jg2 6bg1 Nissan: sd22 sd25 sd33 td25 td27 td42 d11 a15 h15 h20 h20-ii h25 tb42 j15 fe6 bd30 Packed by ctn
Cxt/20p-i tower crane load moment indicator Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: 95%/25 Combined error: 1% Power supply: ac220v (to be customized according to clients requirement) Parameter: Rated load, actual load, trolley amplitude, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with standard fall Remarks: cxt/20p-i is a basic model while cxt/20p-ir add the function of slewing indication and cxt/20p-if adds the function of anemometer.
Cxt/800anti-collision and zone protection system Cxt/800 system protection Tower crane anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once acticipating the hook or cable of the higher tower crane may collide the jib or couter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site.The cxt/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accielents from happening. Pre-alarm/alarm and control Cxt/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitise areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
Crane parts
Forklift transmission - Transmission fit in forklift Usually placed in containers by shipment
Overhead Crane, Gantry Crane, Winch, Hoist.
Crane accessories: insulated baskets, metal baskets, post manipulator, pallet forks, post puller, insulated booms.
