COPPER CATHODES Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Weight of each sheet: 105 kg (+/- 1 %) Net weight of each pallet: 2 MT (+/- 1 %) Min.weight each container: approx. 20 MTI Gross weight each container: approx. 22.20 MT Packing: Palletized banded by aluminums bands 2. CHEMICAL COMPOSITION Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
We are looking for substantial buyers who are end user or agent regarding Copper Cathode. As this matter, we can supply this good as very high quality, competitive price and short delivery by our best service. So please notice the following specification. - Commodity : Copper Cathode - Origin : Congo, Zambia, Chile or Other countries. - Purity : 99.99% min - Term of Price : FOB Steinweg Ndola or CIF ASWP - Payment : By BG, SBLC or Irrevocable, Non Transferable, Confirmed Documentary L/C 100% at sight. For CIF term of payment, The buyer can pay full amount at destination after buyer's inspection for cargo. - Shipment : Within 30 days after receipt of L/C. - Capacity : 5,000mt up to 10,000mt monthly - Loading Port : Port of Congo, Zambia, Chile or Other countries.. - Inspection : By SGS or equal qualified surveyor at loading port as seller's expense and at unloading port as buyer's expense. If you have interests and any question for above specifications, please do not hesitate to get in touch with us and to send LOI issued by end buyer in anytime. Then we will provide full information such as FCO and draft SPA based on attractive price right now. Thanks.
Clean Grade (99.9% to 99.99%) scrap copper wire. The copper wire consists of clean (free of any insulation), unpinned, uncoated, unalloyed copper wire, free of hair wire, brittle burnt wire and excessive oils minimum.
We can supply 99.99% PURE copper cathode from Zambia at LME-14% CIF ASWP , Only end buyer or direct mandate contact with LOI/ ICPO of end buyer only. Supply ability: upto 50000Mt x 12. Accept SBLC and can issue 2% PB.
Size : 125*125*8000 125*125*16000 125*125*812 R4000, R60000
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal. In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV. Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal. In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV. Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
3000MT/MONTH
24 Mt fortnightly 24 Mt in 40 Feet container
PNS: Plates and structures. PNS is very well accepted in Indonesia, India, Pakistan, Bangladesh, Kaohsiung, Taichung and Thailand. It is in 20 ft container and cut under 3-5ft long pieces. Average loading is 24-26 MT in 20 ft GP.
WILSON WALTON / CATHELCO / ACG / NIPPON / CAPAC / JOTUN / WILSON TAYLOR / MORGAN / KC/MME Our specialties are: Impressed Current Cathodic Protection Systems (ICCP) Marine Growth Prevention Systems (MGPS) Shaft Earthing Device (S.E.D) Spare parts Sacrificial Aluminum and Zinc Anodes
Fr-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and ccl is finally formed by hot pressing and curing. Fr-4 copper clad laminated sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (pcb) for television sets, computers, communications equipment and other electronic products.
The main globle makers listed as below: wilson walton / cathelco / acg / nippon / capac / jotun / wilson taylor / morgan / kc/mme Our specialties are: Impressed current cathodic protection systems (iccp) Marine growth prevention systems (mgps) Shaft earthing device (s.E.D) Spare parts Sacrificial aluminum and zinc anodes You can contact with me on whatsapp:008613623351268 or fivestarmarine@vip.163.Com We are the one-stop service station for iccp & mgps systems when your vessel drydock in china. We provide not only spare parts/material but also technical services.
MOQ:1.000MT FOB/CIF/CFR PRICE:LME
Copper scrap wire 1.Product name : copper scrap 2.wire from copper cables 3.clean,red,99.9% 1.name:copper wire scrap 99.99 2.copper content:99.95% min 3.material: copper 4.copper scrap/pallet Material : quality brass wire Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 5.Packing: shrink wrapped+carton+pallet to resist moisture, quake, and corrosion. 6.We could supply the copper scrap with high quality and competitive price. 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could neet customers need. Copper wire scrap at 99% purity. Insulation removed through burning. Copper wire scrap at 96% purity.
we have copper scrap wire high quality 99.9%.do you need it?please tell me .thank you -
Copper Tubes: Copper tubing is most often used for supply of hot and cold tap water, and as refrigerant line in HVAC systems. There are two basic types of copper tubing, soft copper and rigid copper. Copper tubing is joined using flare connection, compression connection, or solder. Copper offers a high level of corrosion resistance. Please speak to the Central.
Copper scrap wire 1.Product name : copper scrap 2.wire from copper cables 3.clean,red,99.9% 1.name:copper wire scrap 99.99 2.copper content:99.95% min 3.material: copper 4.copper scrap/pallet Material : quality brass wire Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 5.Packing: shrink wrapped+carton+pallet to resist moisture, quake, and corrosion. 6.We could supply the copper scrap with high quality and competitive price. 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could neet customers need. Copper wire scrap at 99% purity. Insulation removed through burning. Copper wire scrap at 96% purity.
email:cara@fuoucommercial.com Copper scrap wire 1.Product name : copper scrap 2.wire from copper cables 3.clean,red,99.9% 1.name:copper wire scrap 99.99 2.copper content:99.95% min 3.material: copper 4.copper scrap/pallet Material : quality brass wire Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 5.Packing: shrink wrapped+carton+pallet to resist moisture, quake, and corrosion. 6.We could supply the copper scrap with high quality and competitive price. 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could neet customers need. Copper wire scrap at 99% purity. Insulation removed through burning. Copper wire scrap at 96% purity. Insulation removed through burning. 7.Application: Electrical, light industry, machinery, building industry, national defense industry Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
