SUN 3024 Cooktop.
essure Regulators • Inlet pressure 200 bar maximum • Delivery pressure adjustable 1 to 10 bar • Fluid media, non corrosive gases o o • Temperature range -40 c to +70 c • Body ports 1/4" / 1/2" npt female • Pressure gauges 50 mm diameter • Wetted area parts ultrasonically cleaned corrosion resistance Test pressure is 50% above manifold pressure. Normal cylinder / manifold pressure is: 2 Argon : 151 kg/cm 2 Helium : 151 kg/cm 2 Hydrogen : 151 kg/cm 2 Nitrogen : 151 kg/cm 2 Oxygen : 151 kg/cm 2 Carbon-dioxide : 60 kg/cm 2 Dissolved acetylene : 20 kg/cm 2 Ammonia : 25 kg/cm 2 LP Gas : 17 kg/cm Model PV-R2101 Flashback arrester with non return valves MATERIAL •Varieties of non-corrosive materials to select from •All materials confirm to IS specifications •Materials compatible to fluids •All materials environment friendly MANUFACTURING •Manufactured to exact drawing specification •Threads confirm to IS specifications •Total interchangeability within same type and size CONNECTIONS Standard in 3/8” BSP LH and RM •Wide range of external, internal as well combination of threads, for industrial & domestic usage DESIGN ADVANTAGES •Compatible materials •No soldiered, brazed or welded joints •Leak tight integrity •No gas contamination •Compact size •Useful for all fluids •Pressure suitability •Maintenance free TEST •100% factory tested •Factory test certificates available on demand •Available in 2 models - 20 bar & 200 bar test pressure. Flame Arrester Mesh type MS Seamless body. Available in ½”, ¾”, 1½” BSP Line Regulators for Industrial / Commercial Piping Pre-Reg 2 - 1" Adjustable Regulator - High Pressure LP Online Regulator - Low Pressure with nozzle or 3/8 BSPM LP Online Regulator (Adjustable) - Low Pressure with 3/8 BSPM With NCV adopter As per customer
anifolds Suitable for any number of cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm (17”), 2 x 2, 3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. We manufacture manifolds for all industrial gases in stainless steel pipe and forged blocks. As depicted below : For LPG in LOT or VOT Systems Part No. 1171 to 1177 Suitable for any number of S.C.V. type cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm (17”), 2 x 2, 3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. As depicted below : Multi Lock Bearing Adapter cylinders fitted with self-closing valves to a high pressure system through a standard M.E.C.V. thread with unreduced pressure and a high flow rate. The adopters are fitted with a non return valve to ensure that there is no return flow of LPG whilst cylinders are being disconnected. The salient features of these adopters is the multipoint locking mechanism which combined with a face seal ensures that the adopter will not leak even if it is loaded off axis. The quick disconnecting arrangement coupled with a safety interlock ensures that the device can only be disconnected after turning off the gas flow. Both adopters featured above are available in 22 mm and 25.6 mm seats, and 3/8” or MECV outlet size. Makes available : Kosan | Vel | Gasman cylinders fitted with self-closing valves to a high pressure system through a standard M.E.C.V. thread with unreduced pressure and a high flow rate. The adopters are fitted with a non return valve to ensure that there is no return flow of LPG whilst cylinders are being disconnected. The salient features of these adopters is the multipoint locking mechanism which combined with a face seal ensures that the adopter will not leak even if it is loaded off axis. The quick disconnecting arrangement coupled with a safety interlock ensures that the device can only be disconnected after turning off the gas flow. Both adopters featured above are available in 22 mm and 25.6 mm seats, and 3/8” or MECV outlet size. Makes available : Kosan | Vel | Gasman Manifold Fittings for LPG Manifold Lug MECV MS Adopter • Union Pin Set With Nut • Non return valve for VOT manifold • M.S. Adopter 3/8” B.S.P.P.M. X Bull nose for FECV Nut. Available for ½" and 1" pipelines • Bung: Manifold bung for F valve fitting size ¾” B.S.P.T.M or ½”B.S.P.T.M. Standard Lot Size
Cyclone Burner System B Art No. 333501 •Cyclone flame burners are the most efficient burners for brazing and soft soldering •The rotating flame gives an even and all-round heat transfer to the pipe •Working pressure 2 bar Hot-air System B Art No. 333401 •Hot-air burners with powerful wind proof hot-air streams for heat shrinking •3349 ideal for shrinking in confined spaces and fibre optic closures •Working pressure 2 bar Soft Flame Burner System B Art No. 334191 •Soft flame design ideal for cable work and other heat shrinking applications •To heat the sleeves efficiently but still soft enough not to overheat the shrink material •Working pressure 2 bar Standard Burner System B Art No. 334401 •Standard burners with brush-type flames for all kinds of soft soldering / small heating applications •Silver soldering about 615°C •Working pressure 2 bar Pin-point Burners System R Art No. 884204, 393802, 393902 •Pin-point burners with the finest flames for precision work such as gold and silver forging •Recommended working pressure 2 bar Pin-point Burners System R Art No. 294102 •Standard burners with brush-type flames for all kinds of soft soldering/small heating applications •Recommended working pressure 2 bar Neck Tubes System R Art No. 350101 Only for pin-point burner 884204 Neck tube Length, 78mm Art No. 351102 Neck tubes made for high quality brass Neck tube Length, 70mm Propane Hoses • Diameter 5 mm and 8 mm • EN 559 / ISO 3821 • Fixed connection type • BSP 3/8" LH connection Regulators Art No. 309129 Art No. 306119 Standard Lot Size
Descriptions: Oil consumption: 2 - 3 (kg/hour) Output heat power: 15-35 (kw) Output heat: 15, 000-32, 000(kcal/h) / 60, 000 - 130, 000 (btu/h) Distance from fire gun to flange: 173mm / 6.8 inch Fire gun dia. : 90mm / 3.54 inch Compressed air pressure: 0.05-0.1mpa 220v/50hz & 110v/60hz both available; Package weight: 30kgs / 66lbs Features: 1. Various fuels are applicable, e.G. Used engine oil, used vegetable oil, used crankcase oils, used glycerin, used hydraulic oil, used synthetic oils, waste machine shop cutting oil, Waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc., As well as regular oils, such as diesel, etc. .2. Automatic ignition, workers-nursing unnecessary 3. Flame adjustable freely by air-inlet controller easily; from the ¡¡ãobserving window¡¡à operators can Easily see changes of the flame. 4. All parts tested thousands of times and improved to be of good quality and reliable. 5.All errors readable from the front panel, thus sky burner is just ¡¡ãsmart burner¡¡à! 6. Complete fuel burning ensures very low emissions, reducing pollution as much as possible. Environmentally ¡§cfriendly, exhausting air complies with the requirements of euro iii; 7. Big oil tank optional, as big as 100l container for holding waste oil, pumping system is held At the top topump waste oil into burner machine; at the same time hold the burner machine during Shipping from damage; 8. There is heating instrument at the bottom of big oil tank to pre-heat fuel before pumping, Esp. Considerate for using in cold area. 9. Double safety design for pc program. Export standard packing 27kg
Condition: new type: induction furnace usage: melting furnace Place of origin: f china (mainland) brand name: greenvinci Furnace model number: gv-500-a Voltage: 380v power(w): 70kw induction aluminium melt and holding furnace dimension(l*w*h): 1900*1900*1600 Weight: 1000kg induction aluminium melt and holding furnace Certification: iso9000: 2008 application industry: foundry Validity: 12months melting temperture: 720 degree Color: printed according to your request Unload: manually/ auto pouring Save 30-40% energy 24hours running Fast melting 500kg induction aluminium melt and holding furnace Application industry Aluminum die casting factory Aluminum ingot manufacturer, aluminum waste melting industry Casting factory Auto parts manufacturer Mobile shell, lamp holder, automatic rice cooker plate Energy saving record Save energy above 50% compared with diesel technology Save energy 10%-20% compared with resistance technology Save energy 30% compared with silicon carbide furnace and scr technology 1000kg
Biomass pellet burner for boiler, coating, drying, heat equipment, foundry and other industries, burning of biomass fuels to replace oil, gas, save 30-80% of the cost, energy saving and environmental protection. * combustion chamber temperature: 1700 * output temperature: maximum 1100 * burner outer tube material: 316 s * burner body: carbon steel pained 1800mmx1350mmx1800mm, 2ton
The regulatora conform to international specifications for over 80countries and can aslo be designed as per your needs if large qty.Is orderes All sizes
Tube piston rod thread f1 force 12 4 M4/m3 10-200 n 15 6 M6 40-400 n 18 8 M6/m8 50-600 n 19 8 M6/m8 50-750 n 22 10 M8 100-1500 n 25 10/12 M8 100-2000 n 27 10/12 M10 100-3000 n 28 12/14 M10 100-3000 n By carton, each adjustable gas spring with water-proof plastic bag.
¡¡¡¡ydq5 liquid resistor rotor starters (hereinafter referred to as starters) are the new kind of starting devices developed for improving the starting feature of large- and medium sized wire-wound ac asynchronous motors. Having solved the problems of frequency sensitive resistor starters which are high in impact current, difficult in starting and not easy to Technical characteristics 1 the starting current is low but constant without impact on power network; the starting current is no more than 1.3 times the rated current. Therefore the requirements of the heavy-load starting of motor for transformer capacity can be decreased, reducing lump sum investment. 2 it is smooth in starting, so as to lower its impact on the mechanical equipment, and the service life of the mechanical equipment and motor can be prolonged by about 30 percent. 3 it is high in its heat capacity, and it can start for 3~10 times continuously. 4 it can still start under low voltage state. Smooth start can be ensured so long as the voltage of the power network can guarantee the motor to operate normally. 5 it is simple in structure, easy to maintain. Its reliability is more superior than that of frequency sensitive, oil-soaked type resistors. Packing:wooden case Dimension: variable
The svi gas savers are made with brass or s.S. Extrusion bars and equipped with special property magnets. The product improves the thermal efficiency of the gas and provides up to 25% of gas saving. Certificatation : - india’s one and only gas saver company which is certified and tested by Iso 9001 -2008 company. & “ ce “ certified product. 1.) Government laboratory national small industries corporation limited (nsic) – india 2.) Ongc approved italab pvt. Ltd. – india. 3.) Gas appliances reserch & development – taiwan.
Ef431s Wall mounted fire with pebbles fuel effect N.W. /g.W.: 17/19.2kgs 252pcs/20'gp; 510pcs/40'gp; 584pcs/40'hq Optional led version: model no. Ef431sl Optional led version with backlight: model no. Ef431slb Electric fireplace heater/stove, halogen/quartz heater, convector heater Packing size: 975x195x630mm Product size: 885x135x560mm N.W. /g.W.: 17/19.2kgs 252pcs/20'gp; 510pcs/40'gp; 584pcs/40'hq
Galaxy electric appliance co., ltd, a branch company specializes in production of kitchen&bathroom electric appliances series products, such as gas cooker, range hood, gas water heater, gas oven, etc.
Principle of operation Self-operated pressure regulators are control devices whose measuring units draw their energy from the process mediun which creates sufficient force to move the final control element(plug with plug stem). The regulators consist of a valve and an actuator which either opens or closes the valve when the pressure increases.The regulators are proportional regulators controlled by the process medium.Each deviation from the adjusted set point is assigned a certain valve plug position. Pressure reducing valves Pressure reducing valve or pressure reduing stations withdraw as much energy from a pressure vessel with a higher pressure level as needed to maintain a nearly constant pressure level in downstrem equipment, although consumption fluctuates. The pressure p2 to be controlled (controlled variable x) produces the force fm=p2 x a, which is proportional to the controlled variable, on the diaphragm area a.This force corresponds to the actual value and is compared at the plug stem with the spring force fs=set point Media:water Port size:1/2''~12''
The temperature regulators consist of a valve(globe or three-way valve), or including temperature sensor, set point adjuster, capillary tube and operating element. Special features Low-maintenance p-regulators requiring no auxiliary energy. Globe or three-way valve for liquids, gases and vapors, especially for the heat transfer media of water, oil and steam or for coolants, for example cooling water or brine. Valve body material optionally available as cast iron, spheroidal graphite iron(din version only), cast steel, cast stainless steel or red brass.Din and ansi versions available. Media:water Port size:1/2''~12''
Specifications Gas spring for auto, furniture, machine 1)high quality 2)competitive pricing 3)with iso9001, sgs, rohs 4)3 years warranty Gas spring for auto, furniture, machine 1. Spec.: Extended long: 100~2000mm Stroke: 10~500mm Force: 20~3000n 2. Technical parameter for choice 3. Usage: Cabinet, furniture, tool box, machinery, automobile etc. 4. Features: 1) material: steel 2) color: silver/black and other options 3) connector: ball joint/metal eye/clevis and so on 4) gas: nitrogen filled inside 5) color : black, silver, or as clients' request 6) quality: we can provide fatigue test report. Our products can open and close 100, 000 times, not leak oil; our paint is passed rohs test 7) no noise, smooth operation 8) safe and easy installation 9) resonable price, excellent quality, delivery soon, good service 10) moq: 3000pcs 5. Packing: 1) as standard, 1piece in a plastic bag, then 50-100pcs in a carton 2) also can be according to customers' request 6. Marking: 1) is possible to mark your logo as request. 2) no specified, will mark our logo as standard. 7. Quality: 1) with 100, 000 times life 2) meeting iso9001 international standard 3) pass sgs&rohs certification 8. Warranty: With one year guarantee except man-made troubles. 9. Delivery terms: Fob & cif&cfr 10. Delivery lead time: 7 working day as normal 11. Shipment: Goods can be loaded in fcl at our factory or delivered to warehouse in lcl as request. We can accept your appionted forwarder 80cm*5*5 1.45 kgs for 1 pcs
1. Outside:cast iron coating. 2. Inside: Monobloc steel structure, hand welded, heat-resistant up to 1200° C. 3. Door: Carbon steel, high temperature resistant, with glass-ceramic. 4. Removable ash box: It collects the ash fallen through the holes in the brazier. 5. Glass-self cleaning: Designing wind to blow ash from the glass keeps the glass always Cleaning. 6. LCD control panel: It is placed on the upper side of the stove, simple and easy to be used. It is possible to plan the weekly switching on and off of the stove (week-end included). 7. Thermostat: The stove can keep the room's temperature stably. The temperature can be selected by users both on the panel and remote control, showing on the display. 8. Four steps power setting: It is up to your need, which also shows on the display. 9. Smoke outlet: DIA. 80 mm, inlet DIA.50 mm. 10. Electrical supply: 230V-50Hz-1Ph. 120V-60HZ, 100V-50HZ 11. Remote Control: It is helpful to have the functions of on and off; Power low or high; Temperature low or high; Auto or manual in your hands within 10 meters scope. 12. Automatically clean the dust inside the Burner: It is solved the problem of clogging to the burner when the ash value of biomass pellet is over 2%. Reduce the frequency of your cleaning times Model CR-01 Dimension(W*H*D) 460*1070*582MM Weight 100KG Air inlet pipe 50MM Air outlet pipe 80MM
Item codePp001 Dimension620 l x 305 w x 60 h Sheet thickness0.6 mm No of burnersTwo Total heat output3619 kcal/h Pan supportPowder coated ms Spill trayStainless steel 2 nos. Gas flow rate of burners332 g/h
Item codePp001 Dimension620 l x 305 w x 60 h Sheet thickness0.6 mm No of burnersTwo Total heat output3619 kcal/h Pan supportPowder coated ms Spill trayStainless steel 2 nos. Gas flow rate of burners332 g/h
High efficiency gas burners. Cuts gas leakage automatically if left open from the burner. India's 1st gas stove with automatic flame failure device technology. Patented technology with energy saving up to 30% 8 mm toughened glass. Internationally acclaimed. 100 % safe.
