These belts are manufactured according to the customer specific requirements and usage, the range includes rib, cleats, side wall on top surface of the belt, rough top surface, embossed type surface like waive top and fish top. These belts are manufactured in our own plant situated at Ahmedabad. These belts are designed to provide the major advantages for trouble free service life and have the following advantages like high adhesion, level, higher ply strength and lower self weight, improved utilization, outstanding impact resistance, elimination of edge protection & higher longuidinal flexing. Jagruti endless belt (joint less belt) ‘jagruti’ endless belt without splice joint (joint less belts) are manufactured directly in “sleeve” form as per customer’s requirement. The basic advantage is that, it has no transversal or longitudinal joints. Joint less belts have been highly acclaimed especially when they are used as feed belts on the system such as conveying, gauging, die cutting, dosing and weighing, squaring, stretching bag filling, packaging etc. Joint less belts provides more life then splice joint vulcanized belt. Used for zero spillage, fast and bulk material handling. Suitable for high inclination & magnet separator. Use to carry materials on steeper angle up 90’ with no spillage space requirement is quiet less as compared to conventional belts.
All types conveyor belt, wire mesh.
This machine suitable for transport all kinds of powder granular materials and samll block , such as coal, gravel , lump coal and sand , cement , cereal , etc.Not applicable to transp or perishable , viscous , easy caking materials.
Various conveyor belts. UV Protection+ Iron Reel.
Character: High tensile strength, low elongation values, impact resistance and good troughability. Available for long-distance, large capacity, high-speed transmission of massive, granular and powder materials. 1. More flexible than their equivalent with fabric reinforcement and requiring drums with smaller diameters 2. Using zinc galvanized open steel cord and rubber with property of good adhesion, then the adhesion between steel cord and rubber is tight. And belt is resistant to impact and having longer using life. 3. With advanced manufacturing techniques, steel cords are evenly arranged with the same tension. Therefore, belts can run well and difficult to run away. 4. Limiting of longitudinal cuts and tears with one or two layer of steelcord tensioning according to customers special requirement Application: Steel cord conveyor belts are widely used in distributed occasion, cement, coal mines, quarries, mining, power plants, metallurgy, ports and chemical industry, etc. UV Protection+ Iron Reel.
In some conditions, due to the limit space or in case of lifting materials at a large slope, sidewall conveyor belt is always used to avoid material spilling. This system can convey materials vertically and also can work at a large slope from 0 degree to 90 degree, and allow heavy load material conveying. Carcass: the carcass of the base belt can be CC, NN and EP fabric; clients can choose anyone according to their requirements Character: 1. Low maintenance cost 2. Large transport capacity, and it can avoid material spilling effetely 3. The belt can facilitate switching from horizontal to inclined conveying and from inclined to horizontal conveying 4. It saves a lot space as it allows material conveying at 0¡ã-90. Application: harbor, metallurgy, mining, electricity, coal, foundries, construction, food, cement works, fertilizer, etc. UV Protection+Iron Reel
We manufacture various Steel Cord Conveyor Belts with strength from ST630 to ST7500 and width range from 300mm to 2200mm according to special requirement from customers. Standard: DIN, AS, ISO, BS, JIS, SABS and RMA, etc. Character: High working tensions, low elongation, great conveying capacity, steady running, convenient maintenance, high bucket attachment values, suitable for conveying bulk material. Application: Bucket Elevator conveyor belts are the best solution from the technical and cost-efficiency point of view. They are suitable for conveying material vertically and widely used in building, mining, power station, cement, concrete plants, chemical industry, light industry and grain, etc. UV Protection + Iron Reel
Specification: Open V, Closed-V, L type, H type, Y type, A type and F type, etc. And new patterns can be developed for customers accordingly. Character: 1. Can carry bulk material at angles of 17~ 18 and bagged material at angles of 30~ 50. 2. Cleat angle and pitch are designed for smooth travel over return idlers 3. Cleats and top cover rubber are mono block molding for strength. Application: Chevron conveyor belts are used to convey wet and/or loose materials or bags up steep inclines. The patterns prevent or reduce slide back and increase the amount of product moved by quick pick-up at the point of loading. They are used in quarries, sandpits, cement works, lime works, mobile crushers and screens, farming and salt mines, etc. UV Protection+Iron Reel.
Fabric specs: EP-80~EP-630Belt width(mm): 300~2600Polyester conveyor belts also called EP conveyor belts, whose tensiion resistant body is canvas woven by polyester in warp and polyamine in weft. The belts have the characteristics of low elongation in warp and good troughability in weft, good water resistance, good wet strength, no mould it is suitable for medium, long distance and heavy-load transportation of materials.
Belt strength(ST_NO. ): ST_630~ST_5400Belt width(mm): 600~26001. UsageSteel cord conveyor belts are widely used in high strength, long distance and heavy load than sportation of materials, and they are also used in high strength and distance transportation of materials on special occasions.2. Characteristic(1)High tensile strength: The belts are suitable for large span, long distance transportation of materials.(2)Small elongation in use: The belts need only a very short take-up stroke distance.(3)Small diameter of drive pulley: The bell body has a layer of longitudinally arranged steel cords as its skeleton, and thus is flexble and fatigue - resistant. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.(4)High adhension between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber has the property of good adhesion with steel cords. Therefoe the rubber is tightly adhered to the steel cords that is shock resistant and hard to peel off, which make the belt long life.(5)Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very equably arranged and have the same tension, so the velts are well balanced in tunning and diffcult to run away.(6)Good troughability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from eacaping.(7)Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton, the steel Exporting package
Fabric specs: NN-80 ~ NN-630Belt width(mm): 300~2600Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue.
It works to carry speedy of box, package, jug bag and like this loose or in packs. It can use fixed height or adjustable units. It can be speed adjustable according to customer need. The belt selection is made according to type of product which will carry. It can select pvc, rubber and wire belt types. We can produce speacial manufacturing for desired sizes. Standart Wides A) 300 mm B) 450 mm C) 600 mm D) 800 mm Standard length : 1000-6000 mm Special length : 6000- 60000 mm
It is assumed pick-up will be performed with: - Transported material: powder or fluent plastic granules; - Apparent specific weight 0.7 kg/dm³; - Initial pick-up length having inclination α = 0° and α = 30°; - Rotary spiral with 580 rpm (930 rpm applications are also possible). Load capacity from 120 kg/h-10,000 kg/h.
Materials: stainless steel wire, steel wire, galvanized iron wire, polyester fiber, etc. Weaving and characteristics: conveyor belt can be made into different types, including chain link type belt mesh, balanced weave, reinforced and other types offering different mesh opening and features. Uses: conveyor belt mesh is used widely in heat condition, food processing, pharmacy, glass printing and some special equipments. 1 belt per pack or carton.
Conveyer belt Per container
It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases. No.2 Product advantages: 1. High efficiency, low labor intensity, light in weight, applicable to different types of environment; 2. Unique domestically, advanced internationally. No.3 Technical parameters: 1. Power supply: voltage 380V 50Hz; 2. Power: 3 KW; 3. Weight: 96 kg; 4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered. No.4 Method of usage: 1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape. 2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping. Wooden cases
1. Vulcanization pressure: 0.2 Mpa; 2. Vulcanization temperature: 145 centigrade degree; 3. Difference in surface temperature of vulcanized plate: í+ 5 centigrade degree; 4. Calefactive time (at normal temperature to 145 degree): í_30 mins; 5. Power supply voltage: 220V, 380 v, 415V, 440V, 550V, 660V. 50Hz; 6. Output power of Electronic Control Box: 7.5 KW; 7. Temperature adjustment range: 0 to 200 centigrade degree; 8. Timing adjustment range: 0 to 99 mins; Wooden cases
No.1 Usage: The Conveyor Belt Misalignment Switch is used for detecting the deflection value and distortion of the belt. It keeps the edge of belt from damaging and the material leakage due to deflection of the belt. It is a kind of protective switch that outputs alarm and shutdown signals automatically. No.2 Working Principle & Structural Characteristics: The misalignment switch has two level active function. The first level is used for alarm; The second level is used for shutdown automatically. As the belt conveyor running, if the belt is deflected and contacts the vertical miller of the switch at the same time, vertical miller rotates itself, as the deviation increases, and the vertical miller will be squeezed to deviate. When the deflection angle is over 12íp, the first-level works and outputs alarm signal. When the deflection angle is over 30íp, the second-level works and outputs shutdown signal. The first level switch is used for alarm. It connect the signals with adjusting deflection device, it can realize the function that there is no need shutdown but to adjust automatically. The second-level is used for shutdown. If connect the signals with control lines, it can be realize the function that it will stop as serious deflection of the belt. After eliminating the obstacles, the belt will depart from the vertical miller and it will be restore automatically. In order to adopt the long-term outdoor usage, the product is adopted integrated closed technics. And the inner accessories are adopted vulcanization technics. The outside accessories except the shell are adopted multi-layer chromeplate technics. The shell is adopted casting aluminum, and the surface adopts electrostatic spraying technics to adapt the usage in bad environment. Main Technical Index Ambient temperature 40 ípC to +60 ípC Relative temperature not more than 90% Atmospheric pressure 80 ~ 110 Kpa Altitude not more than 2,000 M Useful time the switch 10,000 Insulation voltage AC1000V, testing one minute Wooden cases
Conveyor Belt Type: nylon/ EP/ canvas / heat-resisting /cold resistant / oil proof / Acid & alkali resistant/ inflaming retarding /sidewall / endless belt / rubber water stop /PVC &PVG / more than 30 type specific molds and so on. 1. Plies: 1-10ply 2: width: 100-3000mm 3. Thickness: 3-50mm 4. Tensile Strength: 9-25MPA 5. High-performance characteristic: resistance to abrasion 6. ISO9001: 2000 Quality Management System authentication Bearing is sealed type, dust resistance and maintenance-free. working time can reach to 12000hours with high loading capacity. By waterprof cloth or as per requested
CWP Machinery manufactures spiral conveyors in various diameter, various length, and various types according to the purpose from carbon steel or stainless steel materials. Chain Conveyors It is used for the high capacity transport of the granule materials in narrow space, in short or long distance. It usually operates in the galleries of the underground mining firms. It is durable through its driving gear, pads, and conveyor chutes of high quality steel against corrosion.
