Features: * Automatic Configuration. * Connects up to 4 HDMI / DVI displays at the same time to one video source. * Allows simultaneous display * Supports 720P, 1080i and 1080P resolutions. * Works with HDMI 1.3 compliant devices. * Works with HDCP compliant devices. Specifications: * Video amplifier speed: 6.75 Gbps. * Video amplifier bandwidth: 225 MHz. * Up to 36bit color depth. * Input video signal: 1.2 Volts p-p. * Input DDC signal: 5 Volts p-p (TTL). * HDMI connectors: type A 19-pin female. * Power supply: DC5V 3A Color packing : neutral packing.
Features: * Automatic Configuration. * Connects up to 4 HDMI / DVI displays at the same time to one video source. * Allows simultaneous display * Supports 720P, 1080i and 1080P resolutions. * Works with HDMI 1.3 compliant devices. * Works with HDCP compliant devices. Specifications: * Video amplifier speed: 6.75 Gbps. * Video amplifier bandwidth: 225 MHz. * Up to 36bit color depth. * Input video signal: 1.2 Volts p-p. * Input DDC signal: 5 Volts p-p (TTL). * HDMI connectors: type A 19-pin female. * Power supply: DC5V 3A * Dimensions: 250 x 161 x 50.5mm * Weight: 1690g.
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported Plug-and-Play installation Support Jumbo frame (64-9216 Byte) Support Voltage Monitor Support full/half duplex auto-negotiation Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX Description: 10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM. 10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. Export standard packaging
HDMI 5 in 1 out switch Features: * switches easily between any five hdmi 1.3 sources. * maintains 480i/p, 720p, 1080i and 1080p solutions. * support hdmi 1.3(12-bit) deep color. * support hdcp compliant devices. * hdmi or dvi to hdmi cables are used to connect the inputs and switcher output. * inputs can be switched with the slim ir remote control * installs in seconds * fully hdmi 1.3 compliant * plastic shell Includes (1) 5x1 switcher for hdmi 1.3 (1) 6v dc 1a power supply (1) ir remote control (1) user manual Product dimensions: 198(l)x98(w)x24(h) Product weight(net): 0.3kg
HDMI to RJ45 converter Features: * plug and play * maintains 480i/p, 720p, 1080i and 1080p video formats * support hdmi 1.3(12-bit) deep color * support hdcp compliant devices * fully hdmi 1.3 compliant * transmit audio & video using cat5e stp cable * plastic shell *** supports 720p/1080i at distance up to 164ft ( 50meters) and 1080p 60hz at distance up to 115ft (35meters). Includes: (1) hdmi to rj45 converter-tx (1) hdmi to rj45 converter-rx (1) user manual Product dimensions(mm): 62.5(l)x52(w)x22.5(h) Product weight(net): 0.15g
Model No.: AJ-PS-50W Specifications Dimension: L159*W97*H38mm Weight: 0.5KG Input voltage: 85-130/170-264VAC Output voltage: 12VDC Output current: 4.2A Output power: 50W According to order
Model No.:AJ-WPS-5W Specifications Dimension: D58*H24mm Weight: 120g Input voltage: 110-250VAC Output voltage: 12VDC Output current: 0.42A Output power: 5W IP Rating: IP65 According to order
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
Features: Automatic selection of optimal fusion splice program Automatic detection of fiber end face Automatic calibration of arc discharge Automatic fiber alignment function Automatic calculation of splice loss 5-inch color LCD monitor with clear digital image display Dual mode of view, separately view of X/Y axis, simultaneous view of X and Y axis Wind resistance function Intuitive operating interface and menu design Built-in battery Compact size and light weight Specifications: Parameters Specifications Applicable Fibers SM, MM, DS, NZDS Fiber Cleaved Length (mm) 12 ~ 16 (Coating Dia.: 250um) 16 (Coating Dia. 250 ~ 1000um) Fiber Diameter (um) Cladding diameter: 80 ~ 150 Coating diameter:100 ~ 1000 Fiber Count Single Fiber Aligning Method Core aligning Return Loss (dB) >60 Actual Average Splice Loss (dB) 0.02(SM), 0.01(MM), 0.04(DS), 0.04(NZDS) Splice Mode Auto & Manual Typical Splice Time (sec) 9 seconds with standard SM fiber Fusion Splice Program 12 (templet), 188 (user) Tube Typical Fusion Time 30 sec Protection Sleeve Length (mm) 60, 40, 20 Storage of Splice Result 5000 results, 3 parameters per result Tension Test (N) 2N Fiber Magnification 400X (X or Y view), 200X (X and Y view) Electrode Life 2500 times No. of Splice/Heating with Battery Typical 130 cycles with built-in Li-battery Monitor Reversible The fiber image can be turned over Display Screen 5 inch color LCD monitor Terminal RS232 Power Supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Operating Condition -10 ~ +50ó¬C; 0~95%RH (no condensation); 0-5000m above sea level; Max wind velocity of 15m/s Dimensions (mm) 150(L) x 150(W) x 160(H) Weight 3.52Kg including battery
Product features Hot z-pluggable Xaui electrical interface: 4lanse@3.125gbit/s Below 2.2w power dissipation Sc-duplex optical receptacle Digital diagnostic monitor interface Very low emi and excellent esd protection Cooled 850nm vcsel laser and rosa Up to 300m for om3 fiber Operating temperature range 0ípc to 70ípc Standards X2 msa compliant Ieee802.3ae-2002 compliant Gr-253-core compliant Rohs compliant Applications 10g base-sr/sw ethernet Other optical link Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty 00
Features 10gb/s serial optical interface compliant to 802.3ae 10gbase-sr Electrical interface compliant to sff-8431 specifications for enhanced 8.5 and 10 gigabit small form factor pluggable module í¦sfp+í¦ 850nm vcsel transmitter, pin photodetector 2-wire interface for management specifications compliant with sff 8472 digital diagnostic monitoring interface for optical transceivers Operatingcase temperature: 0 to 70ípc All-metal housing for superior emi performance Low power consumption Advanced firmware allow customer system encryption information to be stored in transceiver Rohs compliant 0
Features: Hot pluggable xenpak form factor Xaui electrical interface: 4lanse@3.125gbit/s Below 2.2w power dissipation Sc-duplex optical receptacle Digital diagnostic monitor interface Very low emi and excellent esd protection Cooled 850nm vcsel laser and rosa Up to 300m for om3 fiber Operating temperature range 0ípc to 70ípc Standards: Xenpak msa compliant Ieee802.3ae-2002 compliant Gr-253-core compliant Rohs compliant Applications 10g base-sr/sw ethernet Marks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty 00
AV to VGA Convertor, PC Displayer for Monitoring, RCA Input Connector : Support 1024X768 Resolution from CCD Camera to PC Displayer VGA to AV Convertor, Transmission VGA Encoding Signal by Coaxial Cable Support 1024X768, for Media -Eboard Distributed Instation
We are a professional manufacturer of membrane switch, graphic overlays, membrane circuit and the related supporting products, also produce or assemble fpc, pcb, silicone rubber & plastic, and hardware components
Elecsound is strong in types of switch. Welcome to check below series: Bottom slide switch Detector switch Hook switch Horizontal slide switch Leaf switch Micro switch Mini slide switch Multi function switch Plastic push switch Push switch Rocker switch Special function switch Tact switch toggle switch Vertical push switch Vertical slide switch Bulk
4 input hdmi signal and 16 hdmi signal sink , any input to output With backward ir channel Hdmi 1.3 protocol compliant Hdcp 1.2 protocol compliant Support deep color 36bit Wall mounting with power protection & heat dissipation window Dts-hd/true-hd/lpcm7.1/ac3/dts/dsd audio format Full-hd 1080p/1600x1200uxga It can smartly jump over these input sources which are not in work. Color gift box, 5pcs/ctn
1 input hdmi signal can split to 8 hdmi signal sink devices simultaneously Hdmi 1.3 protocol compliant Hdcp 1.2 protocol compliant Support deep color 36bit Super slim type Dts-hd/true-hd/lpcm7.1/ac3/dts/dsd audio format Full-hd 1080p/1600x1200uxga Capable for up to 2 times cascade without any transmission los Hdmi gift box, 5pcs each ctn
4 hdmi input and 4 output over cat5e/6 . Any input to any output Hdmi1.2 1080p full-hd output Hdmi1.3 1080p full-hd output, deep color 36bit Wall mounting with power protection & heat dissipation window Hdmi digital audio format: dts-hd/dolby-true-hd/lpcm7.1/dsd Support xv-ycc and blue-ray player for 24fs film format Manual or remote or with rs232 controled by computer select source input signal to different sink It can smartly jump over those input sources which are not in work Dc9v power supply Color gift box, 5pcs/ctn
1.25g cwdm-sfp-1490 optical transceiver. Dualfiber singlemode 1490nm 80km Features Dual data-rate of 1.25gbps operation 1490nm cwdm dfb laser and pin photodetector for 80km transmission Compliant with sfp msa and cwdm-sfp-1490 with duplex lc receptacle Digital diagnostic monitoring: Internal calibration or external calibration Compatible with rohs +3.3v single power supply Operating case temperature: Standard : 0 to +70+¼pc Industrial : -40 to +85+¼pc Applications Gigabit ethernet Fiber channel Switch to switch interface Switched backplane applications Outer/server interface Other optical transmission systems Description The sfp transceivers are high performance, cost effective modules supporting dual data-rate of 1.25gbps and 80km transmission distance with smf. The transceiver consists of three sections: a cwdm dfb laser transmitter, a pin photodiode integrated with a trans-impedance preamplifier (tia) and mcu control unit. All modules satisfy class i laser safety requirements. The transceivers are compatible with sfp single-source agreement (msa) . Information, please refer to sfp msa.
Product name: 10/100m fiber media converter Dual fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a
