Features: 100/1000BASE-T1 via Marvell 88Q2112 PHY DC Voltage Requirements: 4.5-40Vdc Item will require the following items to work fully: Software, Cables, USB C cable Items Included: Intrepid Rad Moon 2 Media Converter Cable W/ power connector on one end 4500 units available
A DTWUH0301D B Multifunctional Home Theatre
XH-FSW-8-8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features: Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LED display panel. Visual display, Convenient operation. Transparent transmission signal. High stability and reliability. Channel and time interval of automatic scanning can be set up. RS232 Control and Ethernet Remote Management Applications: FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Specifications Parameters Unit Indicators Channel No. 8-8 Wavelength Range nm 1260~1650 Test Wavelength nm 1310/1550 Insertion Loss dB 2.5 dB Repeatability dB 0.04 Return Loss dB 50 Crosstalk dB 55 WDL dB 0.50 PDL dB 0.1 Optic Power mW 500 Fiber Type SM 9/125um Connector FC/APC Monitoring Port RJ45 RS-232 Working Power Supply Plug-type V AC:100ï½? 240 (50/60Hz) Power Consumption W 30 Operating Temperature -10 60 Size mm 4U:483 x 500 x 178
Describe XH-FSW-24X24 matrix rack optical switches is a product that uses optical switches to realize optical path conversion. The device provides serial port RS-232 and Ethernet RJ45 interface, through the TCP/IP protocol connection to send commands to control optical path switching, and finally realize 24 (input) Ã?? 24 (output) full-switching non-blocking two-way fiber-optic routing Cross-connect plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems; optical testing systems are used for optical fibers, optical devices, networks and field engineering optical cables Testing; Optical device assembly and adjustment Features (1) Ethernet port, serial port communication interface command control. (2) full switching non-blocking two-way cross connection. (3) Equipped with LC Seiko flange, the insertion loss is small. (4) Small insertion loss, fast switching speed, high signal stability, no crosstalk on adjacent channels parameter Parameter Parameter Values Model XH-FSW-24X24-Q Wavelength Range 1260~1650nm Insertion Loss 1.2 dB Repeatability 0.02 dB Return Loss 50 dB Crosstalk 70 dB WDL 0.25 dB PDL 0.05 dB Fiber Type SM 9/125um Lifetime 107 Switching Time 15ms(Adjacent channel) connector FC\PC control RJ45 RS-232 Operating power AC 100~240V Operating Temperature -10 ~ +60 Storage Temperature -40 ~ +85 Dimension 19 4U 483 X 600 X 178
XH-FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path manually, proximity and remote via keypad, serial communication and Ethernet communication. The FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path switching manually, near-range and remotely through keypad, serial communication and Ethernet communication. It plays an important role in optical communication applications. Optical switches are mainly Optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multiple light sources / detectors automatic switching and optical sensing multi-point dynamic monitoring The optical switch is used in optical fiber, optical device, network and field engineering optical cable testing; optical device installation and adjustment. Features (1) With small insertion loss and fast switching speed, etc. (2) The internal circuit of the optical switch is self-detecting, and the fault alarm informs. (3) The serial port adopts FT-232 industrial-grade USB to RS-232 chip. (4) LCD display is adopted to display the status of the optical circuit very intuitively, which is convenient for the userâ??s operation. (5) Can send commands through the key and serial port, network port to control the light path switching settings. And the key operation can be locked through the serial command. Performance Parameter Parameter Values Model XH-FSW-1XN-U Wavelength Range 1260~1650nm Insertion Loss 1.2 dB Repeatability 0.02 dB Return Loss 50 dB Crosstalk 70 dB WDL 0.25 dB PDL 0.05 dB Fiber Type SM(9/125um) connector FC\PC Monitoring port RJ45,RS-232 Operating power AC:100~240V Operating Temperature -10 ~ +60C Operating Temperature -40 C ~ +85 C Dimension 19 1U(483 X 230 X180)
XH-28-D1X2 OPTICAL SWITCH EQUIPMENT Features It has the characteristics of low insertion loss and fast switching speed. It can be controlled by RJ45 Ethernet or RS-232 serial port command. 28 independent control optical switch buttons, easy to operate. Two different colors of LED display lights, showing the status of the light path. Equipment power supply supports AC: 85~265V AC power supply. Performance Name Parameter Model XH-28-D1X2-U Working wavelength 850/1310nm Test wavelength 850nm Insertion loss 1.5 dB Repeatability ±0.02 dB Return loss 35 dB Crosstalk 50 dB Wavelength dependent loss 0.25 dB Polarization dependent loss 0.05 dB Switching time 10 ms Adjacent channel Fiber type MM 50/125um) Connector form LC\PC customizable Monitoring port RJ45 RS-232 Working power AC 85~265V Operating temperature -5 ~ +55 Storage temperature -40 ~ +85 Chassis size 270mm X 190mm X 135mm
1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type 1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type V AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134 AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134
XH-OSW-2X2B bypass mechanical optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize that the whole optical path cannot communicate normally when the power failure occurs at a certain point of the single-fiber multi-point equipment. Bypassing the power-off point, the optical path can operate normally. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fibers, optical devices, networks and field engineering optical cables Test; optical device installation and adjustment. Features Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Simple control, small size, easy to embed in the circuit board Locking and non-locking control types can be selected Performance Parameter Parameter Value Model XH-OSW-2X2B Insertion loss dB Typ 0.5 Max 1.0 Wavelength Range nm 800~1310 & 1260~1650 Working Wavelength nm 850/980/1310 & 1310/1550/1625 Return Loss dB MM 30 & SM 50 Channel Crosstalk dB MM 35 & SM 55 PDL dB 0.05 WDL dB 0.25 TDL dB 0.25 Repeatability dB ±0.02 Switching Times Times 107 Switching Time ms 8 Transmission Power mW 500 Operating Voltage V 3 or 5 Operating Temperature -20~+70 Storage Temperature -40~+85 Package Cize mm (L)27.0 (W)12.5 (H)8.4 ±0.2
XH-OSW-2X2F optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize the two-way direct and cross function of the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fibers, optical devices, networks and field engineering optical cables Test; optical device installation and adjustment. Features Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Simple control, small size, easy to embed in the circuit board Locking and non-locking control types can be selected Performance Parameter Parameter Value Model XH-OSW-2X2F Insertion loss dB Typh 0.5 Max 1.0 Wavelength Range nm 800~1310 & 1260~1650 Working Wavelength nm 850/980/1310 & 1310/1550/1625 Return Loss dB MM 30 & SM 50 Channel Crosstalk dB MM 35 & SM 55 PDL dB â?¤0.05 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB ±0.02 Lifetime Times 107 Switching Time ms 8 Transmission Power mW 500 Operating Voltage V 3 or 5 Operating Temperature -20~+70 Storage Temperature -40~+85 Dimension mm (L)27.0 (W)12.5 (H)8.4 ±0.2
Mechanical Optical Switch Module XH-OSW-1X12 is an optical path control device, with the role of controlling the optical path and converting the optical path, the size of this module can be up to 12 channels; can achieve multiple optical signal input, select the signal output of one of the channels or vice versa (to support bidirectional use), the module control mode using TTL high and low logic level control, the microcontroller chip pins can be directly driven control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fiber, optical devices, networks and field engineering optical cable testing; optical device mounting. Features hLow insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Imported motor components, higher reliability of life Failure self-test function in internal circuit design Simple control mode, small size, easy to embed in the system Parameter Parameter Parameter value Model XH-OSW-1XN N 12 Insertion loss dB Typical value: 0.5 Maximum value: 0.8 Wavelength range nm 800~1310 1260~1650 Working wavelength nm 850/980/1310 & 1310/1550/1625 Return loss dB Multimode 30 & single mode 50 Channel crosstalk dB 70 Polarization dependent loss dB 0.05 Wavelength dependent loss dB 0.25 Temperature dependent loss dB 0.25 Repeatability dB 0.02 Switching times Times >107 Switching time ms 8 Transmission power mW 500 Power supply V/mA 5/600 Operating temperature -20~+80 storage temperature -40~+85 Package size mm 80 40 32
XH-OSW-1 128 mechanical optical switch is a kind of light path control equipment. It can realize multi-channel fiber optic light path switching. In the optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and related component test, outdoor cable test and multi-spot optical sensors monitoring system. Feratures Low Loss and High Reliability Parallel Interface (TTL) Modularized Design Epoxy-free on Optical Path Drive Circuit Breakdown Self-checking Function Applications Ring Network Remote Monitoring in Optical Network Testing of Fiber Optical Component
Description: The matrix optical switch module is a kind of optical path control device, which can be arbitrarily interconnected among multiple groups of input ports and multiple groups of output ports. Due to its advantages such as good environmental performance, it is mainly used in optical communication for cross-connection of backbone optical nodes, multi-dimensional online monitoring, etc. Features: Low insertion loss Fast switching Support half-cross/full-cross customization Support input/output port power monitoring customization High stability and high reliability
XH-OSW-1xN optical switch is an optical path control device, which has the role of controlling the optical path and converting the optical path. It has an important role in optical communication applications. The optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multi-source/detector automatic switching and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment. Features Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Proprietary technology, no glue in the optical path Locking and non-locking control types are available
XH-OSW-1X4 optical switch is an optical path control device, which has the role of controlling the optical path and converting the optical path. It has an important role in optical communication applications. The optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multi-source/detector automatic switching and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment. Features â?? Low insertion loss, wide wavelength range â?? Low channel crosstalk, high stability, high reliability â??Proprietary technology, no glue in the optical path â??Locking and non-locking control types are available Performance Parameter Parameter Values Model XH-OSW-1X4 Insertion Loss 1
XH-OSW-1X32 optical switch is an optical path control device, which has the function of controlling the optical path and converting the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems in optical testing systems for optical fibers, optical devices, networks and field engineering. Optical cable testing ; Optical device adjustment. Features: Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Unique technology, no glue in the optical path Selectable locking and non-locking control types Parameter Parameter parameter values model XH-OSW-1X32 Insertion Loss 16
XH-OSW-4-8 mechanical optical switch is a kind of light path control equipment. It can realize multi-channel fiber optic light path switching. In the optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and related component test, outdoor cable test and multi-spot optical sensors monitoring system. Feratures Low Loss and High Reliability Serial Interface (RS-232) Modularized Design Epoxy-free on Optical Path Applications Ring Network â?¢Remote Monitoring in Optical Network Testing of FiberOptical Component Specifications Parameter Parameter Values Model XH-OSW-4X8-N Insertion Loss 1.5 dB Wavelength Range 1260~1650 nm Fiber Type 9/125um Return Loss 50 dB Crosstalk 55 dB PDL 0.10 dB WDL 0.30 dB TDL 0.30 dB Repeatability 0.05 dB Lifetime >107 Switching Time 20 ms Adjacent channel Connector LC/UPC Control Mode RS-232 Working Power Supply 5V/800 mA Product Sze 135x64x32 Operating Temperature -20 to +70 Operating Temperature -40 to +85
USB 3.1 Type C to HDMI VGA Adapter USB Type-C Terminal equipped USB Type-C image conversion adapter that converts video signals of PC, tablet, etc., and can output to display TV projector, etc. equipped with HDMI input terminal.
Nomral Touch, Automation Switch
Product Description - We have power range for all products so we need to add ach power one by one. Is it possible to myself Product origin - We have Made in Turkey and Made in Germany option Minimum Order Size and Packaging details - There is no min order limit Oversea packing Key Specifications/Special Features Place of Origin - Turkey and Germany Brand Name - LOTUS Model Number - LOTUS-STS Usage - SVC Phase - Three Phase Protection - IP20 / IP55 / IP65 Frequency - 50Hz/60Hz Power factor - 0.8/0.9/1/Customized Color - Black or RAL7035 or Customized Rated power - 3KVA - 4000KVA 25A- 600A
Product Description - Frequency Converter Price of product ( USD price or FOB price) - Is it possible to myself Place of Origin - Turkey and Germany Brand Name - LOTUS Model Number - LOTUS-FC Usage - SVC Phase - Three Phase Protection - IP20 / IP55 / IP65 Frequency - 50Hz/60Hz Power factor - 0.8/0.9/1/Customized Color - Black or RAL7035 or Customized Rated power - 10KVA - 4000KVA
