High molecular high-density poly ethylene (HM, HDPE), a type of plastic carry bag, has a strong degree of rigidity as well as a high initial tear and propagation resistance.
Special Features: The device can transport dry fluidity powder material in any distance. The transport ability is 1500m3/h. It is widely used in building material, metallurgy, light chemical and feed industries etc. to feed or transport cement, powder coal and flour of milling and stove. But it is not suitable for the material of great granularity, big washiness and bad fluidity. The device is divided into three layers. Puff layer is below the device, transport material layer is above and ventilate layer is in the center of device. Low pressure and little volume air supplied by wind machine flow from puff layer to ventilate layer, making the material flowing and realize the moving of material. It has the features of little cost of energy, no noise, no pollution, no lubrication, low maintain ratio, high carrying ability, lightweight, saving effective place, agility to dispose wire and easy to change transport direction. It is only can transport in certain angles, not upwards. Otherwise please choose air-elevating system. Great obliquity is good for transporting if the technics disposal permits. Obliquity is always 4 ï½? 6%. Commendatory obliquity is more than 10% when transport coarse material.
We have recently representing China TOP 5 Container manufacturer with following information:
1. Montly supply: 1000+ units of Containers
2. 20 / 40 / 20HQ / 40HQ
3. Artwork &: printing included on Container body
4. Ex-Factory China Price: USD5600- 8050
5. Payment Terms: L/C or TT
6. MOQ: 100 units
7. Production Leadtime: 60-80 days
8. Quality: Universal Standard
9. Brokers welcome
Principal particulars
LengthO. A.69.70 m
LengthB.P.63.5 m
Breadth mld10.8 m
DepthMld5.3 m
DraftLoaded3.9 m
Approx. Block coefficient0.80
Total no of engine2 nos
Engine power (each)620 bhp
Gear box ratio3 : 1
PropulsionTwin screw
1.Complying with European Trailer Standard (A1371), improved front lift fitting protect reefer machine, and is secure while stacking.
2.The installation of the space checker
3.Low tare weight, high strength and excellent insulation capacity
4.A capacity of 33 European standard pallets
5.The installation of the anti-thief system
6.Overhang of protection frame, and steel slim door structure
7.Full intermodal operation.
Dimension: 13716mm X 2556mm X 2896mm
Tare weight: 5710kg
Inner capacity: 83.90cbm.
We are a special reefer container manufacturer, operated as the subsidiary of China International Marine Containers (Group) Ltd (CIMC), our core business is focused on manufacturing various reefer & insulated containers and has full-scale product range from 10ft to 53ft special containers, inclusive standard shipping refrigerated containers, military containers, specialized reefers, insulated containers, cold storage containers, we hold more than 100 engineering patents and have full capability to manufacture your desired units.
Our factory has obtained ISO9001, ISO14001 and ISO18000 certification as well as factory and laboratory certifications from international authorities inclusive ABS of the U.S., GL of Germany, BV of France and CCS of China. As taken customer's requirements oriented, we have continuously supplied standard and special reefer & insulated containers to most famous ship-owners, container lessor and international trading company all over the world.
20'HC: 6058mm X 2438mm X 2896mm, capacity:32.30cbm
40'HC: 12192mm X 2438mm X 2896mm,capacity:67.40cbm.
Sevik container has been produced with top quality materials and high end technology, to meet European standards.
For storing those materials which have a risk of leakage it provides an intrinsically safe environment with an internal reservoir which has filters that control the leaking substance. The container can be demounted, folded and wrapped. Therefore it has a low transportation cost. Thanks to its special lifting lugs on the corners a fully packed container can easily be lifted by crane or forklift.
This container is made to the highest standards and provides practical solutions for any storage problem.
Storing chemical substances
Due to the design of the castellated floor and leakage reservoir for the petroleum products, fluid chemicals and flammable substances, for those facilities that use these chemical substances, particularly gas stations, it provides an environment friendly safe storage
Storing waste, organic waste and garden waste
The container can be used domestically and for any facility which requires storing any waste products including organic waste. Also it is a useful container for the garden.
Garage container
Due to its special design with the additional side door, it provides an easy exit from the side and is particularly useful as a garage as there is ease of entry with its entry ramps.
Storing materials, equipment, tools.
Any kind of equipment can be stored due to the materials resistance to changing weather conditions.
Transportation and storing are made easier by mounting it on trailer.
It is then possible to transport material and equipment with a tow hook or any other towing equipment.
Sides and doors are produced from 0,75 mm frame, 2,00 mm galvanized steel.
Therefore there will not be oxidation. The ground is produced from 35 mm corrugated, joint, hardwood floor or 12 mm plastic.
The reservoir is covered with demountable galvanised grate.
The container does not require infrastructure or foundation.
20' / 40' used, certified, sea worthy containers
Standard / Open top /high cube / Flatrack / Reefer containers supplied in all ports / inland container depots of India / UAE.
All details about
Liberian flag built 84
26650 mt dwat on 9.543 m ssw
Loa 167.2m / beam 26.00m tpc 37.63
Moulded depth 13.3m
Grain 1200528 cuft/bale 1153007 cuft
Gear 4 x 25t cranes
5 holds/5 hatches
Hatch sizes 1)13.86 2-5)19.25 all x 13..05 tt strengths 15mt per
M2 cons
Abt 13k on abt 19mt ifo 180 cst plus 1.5t mdo under good weather
Upto/incl
Bff4/dss3 grt/nrt 15763/9004 ifo/mdo capa 1020 mts ifo and 150 mts
Mdo bbs
90% full port cons: idle 0.1 mts ifo and 1.5-2 mts mdo / working
0.1 mts ifo
Mts mdo
Constants 300 mts excl fw
Gr bdown per hold 1-5 :
170038/262471/262703/263106/242210 total 1200528cbft
Tt 15 mt/m2 - deck 3.5 mt/m2 - hatches (1) 2.3 mt/m2 (2-5) 3 mt/m2
Hold dims
Given in good faith wog:
(1) 21.55m x 5.8m fore 17.5m aft (2-4) 25.95m x 17.5m (5) 25.41m x
17.5m
Fore 7.25m aft
Tanktop area wog h1=251.05 h2=454.125 h3=454.125 h4=454.125
H5=314.45 sqm
Class: nkk
