Material: high grade of gypsum, whiteness: >90 degree, breaking strength: 2.706MPa/2 hours, no impurity), with fiberglass, good quality fiber. Finish: Smooth surface, clear beautiful pattern, high temper. 1)It's fireproof, mildew and worm resistant, moisture proof, and sound and heat insulated. 2)Itcan be processed by sawing, digging, nailing, adhering and patching, and therefore it is easy and convenient in construction 3) Various shapes and sizes available. We can also produce upon your detailed requests. 6-10 pieces per bundle with water-proof package, filmy cushion between each pieces, and contractive plastic cover it ,also can according to your demand.
Introduction Model WD28-207-828 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX28-207-828 Frame Dimension 8m*1.5m*1.4m Weight 5-7 ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment. Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box.
Introduction Model WD76-305-914 series decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. Ití»s best to be used as the floor of high buildings, and the cost of such floor is low. Main Parameter Machine Type YX 76-305-914 Frame Dimension 19m*1.5m*1.3m Weight 10-12ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 11kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.75-1.5mm Forming Speed 10-12m/min Step Of Roller 25-30 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Introduction Model WD26-200-800/1000 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX 26-200-800/1000 Frame Dimension 8m*1.5m*1.4m Weight 5-7ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Component and Function 1. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement. 2. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. 3. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. Main Parameter Machine Type YX15-225-900 Frame Dimension 5m*1.5m*1.4m Weight 3ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 2.2kw Hydraulic Cut Power 1.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.3-0.8mm Forming Speed 10m/min Step Of Roller 9 steps More Details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Does not create cracks Can be applied to any surface
Uniaxial geogrid is a kind of high strength geosynthetics which take high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radition and anti-aging. Through directional stretch, the original scattered chain molecule will be realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation is only 4-10%, which nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Tensile Strength (KN/M) Tensile Strength @ 2% Elongation (KN/M) Tensile Strength @ 5% Elongation (KN/M) Elongation (%) Carbon Content (%) Width (M) TGDG50 í¦50 í¦12 í¦23 í_12 í¦2.0 2.0 TGDG60 í¦60 í¦16 í¦30 TGDG80 í¦80 í¦21 í¦40 TGDG110 í¦110 í¦29.5 í¦58 TGDG130 í¦130 í¦36.5 í¦72 TGDG170 í¦170 í¦50 í¦99 Standard package or as customers' requirements
Uniaxial geogrid is a kind of high strength geosynthetics which take high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radiation and anti-aging. Through directional stretch, the original scattered chain molecule will be realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation is only 4-10%, which nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Tensile Strength (KN/M) Tensile Strength @ 2% Elongation (KN/M) Tensile Strength @ 5% Elongation (KN/M) Elongation (%) Carbon Content (%) Width (M) TGDG35 í¦35 í¦10 í¦22 í_10 í¦2.0 2.5 TGDG40 í¦40 í¦11 í¦24 TGDG50 í¦50 í¦12 í¦28 TGDG60 í¦60 í¦14 í¦34 TGDG80 í¦80 í¦26 í¦48 TGDG100 í¦100 í¦35 í¦68 TGDG110 í¦110 í¦38 í¦75 TGDG120 í¦120 í¦43 í¦82 TGDG130 í¦130 í¦47 í¦90 TGDG150 í¦150 í¦57 í¦120 TGDG160 í¦160 í¦60 í¦124 TGDG180 í¦180 í¦64 í¦130 TGDG200 í¦200 í¦74 í¦145 TGDG220 í¦220 í¦80 í¦156 TGDG260 í¦260 í¦94 í¦185 Standard package or as customers' requirements
Biaxial geogrid is a kind of high strength geosynthetic which takes high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radition and anti-aging. Through directional stretch, the original scattered chain molecule is realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Longitudinal/ Transverse Tensile Strength (KN/M) Longitudinal/ Transverse Tensile Strength @ 2% Elongation (KN/M) Longitudinal/ Transverse Tensile Strength @ 5% Elongation (KN/M) Longitudinal/ Transverse Elongation ú¿%ú¬ TGSG1515 í¦15 í¦5 í¦7 í_15/13 TGSG2020 í¦20 í¦7 í¦14 TGSG2525 í¦25 í¦9 í¦17 TGSG3030 í¦30 í¦10.5 í¦21 TGSG3535 í¦35 í¦12 í¦24 TGSG4040 í¦40 í¦14 í¦28 Standard package or as customers' requirements
Refractory product with refractoriness is over 1,750oC. Many size and shaped of products are available. We are pleased to enclose the specification as follow: Chemical composition 1. SiO2, (%), < 55 2. Al¼2O3, (%), > 37 3. Fe2O3, (%), < 1.7 4. CaO, (%), < 1 5. MgO, (%), < 0.2 6. K2O, (%), < 1.5 7. Na2O, (%), < 0.5 Physical properties 1. Refractoriness, (oC), > 1,750oC 2. Heat resistance 950oC û air, > 11 times
LBM refractory ceramic pipe are used for metal casting, specifications as follow: - SiO2 < 55% - Al2O3> 37% - Bulk density, g/cm3 > 1.72 - Refractoriness > 1,750oC Many size and shapes are available -Straight pipe -Elbow pipe -Tee pipe -Nozzle cup
Plasterboard thickness: 12.5mm Aluminium alloy frame thickness: 2 mm Standard plasterboard, moisture resistance plasterboard, fire resistance plasterboard are available. Main size: 200x200mm, 300x300mm, 400x400mm, 500x500mm, 600x600mm Other sizes are available on your request. Individual box, 5 pcs/ctn.
Thickness 0.5mm to 3mm Material hdpe or ldpe Width 5 meters to 8 meters
Pp/polester non woven geotextiles Width upto 4 meters 100gsm to 2000gsm
Easy paper joint tape is a pre-gummed tape designed for use with jointing compounds to reinforce and strengthen plasterboard joints and corners. Retains strength when wet, with tapered edges for invisible seams. Specification: 50mm x 23m 50mm x 75m 50mm x 150m Other specifications on customer's request. We have local paper and import american paper for your choice. Easy is the best policy! 10 rolls/ctn
Easy drywall joint tape is a kind of woven fiberglass alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes. It is widely used for reinforcing wall surfaces in buildings, and is an ideal material for preventing wall cracks. Specifications: 1) width: 42, 48, 50, 100, 150 and 200mm 2) length: 10, 20, 30, 45, 90 and 153m 3) weight: 55 - 85gsm 4) mesh size: 2.85m x 2.85mm, 3.2 x 3.2mm 5) colors: white, yellow, blue etc. 6) other specifications are available according to customers' needs Easy is the best policy! As per customers' requirements, shrink warped with one label, plastic bag and so on.
Centrifugal glass wool blanket are made for large laying area.Beside the character of thermal insurance, it also has the performances of shock absorption and acoustical isolation, especially for middle or low frequency sound, which can cancel the noise and improve working environment. This material can be freely cut in construction according the shape required, mainly used in room, noise-canceling system, transportation, refrigerators and household electric appliances for noise canceling. 1. Vacuum plastic bag +woven bag 2. Vacuum plastic bag+woven bag+PE bag 3. Vacuum plastic bag+ PE shrinking bag 4. PE shring bag. Note:OEM is acceptable.
Helpful for reducing heat & cool loss and preventing condensation Flexible duct covered by fiberglass insulation and aluminum/ polyester laminate jacket. Good fire resistance and pressure resistance along with good thermal insulation. plastic bag or carton
Helpful for reducing heat & cool loss and preventing condensation Flexible duct covered by fiberglass insulation and aluminum/ polyester laminate jacket. Good fire resistance and pressure resistance along with good thermal insulation. Plastic bag or carton.
Glasswool pipe section is a kind of economical insulating material which is light and easy to install. This material has excellent performance of heat and sound insulation under both extremely high and low temperature conditions(.-85 degree to 454degree) therefore, glasswool section pipes are widely used on heat and sound insulation of ventilating ducts, industrial & civil heat supplying and all kinds of heating, cooling pipelines. Plastic bags or carton.
