Easy Installation: easy installation process and no specified skills
are involved, hence only short time training is required.
Easy Decoration: tiles can be applied direct on the surface board of
the panel & can be spiked, drilled, install setscrew at any point.
Save Money: Compared with traditional Wall Panel can save 30% usable
fee.
High Strength: Can be used in high buildings (No deformation & No
cracking )
Environmental Friendly: without any harmful substance
Energy conservative: recycled used
Light Weight: 1/6 of normal brick wall
Water Proof & Moisture Proof: excellent protection for damp
circumstance.
Heat Insulation: Suitable temperature 350-500
Fire Resistance: Grade A of National standard, excellent
• Lightweight and removable, easy to install and transport. No tools needed, fast constructing by simple interlocking interface design.
• Grating, edging and corner, with 6 male buckle on each two sides, 6 female buckle on another two sides.
• Edging: snap button, corresponding to grating.
• 6.8 tons capacity per square meter (flat ground)
• Color : red, green, yellow, blue, black, white ,gray. Colors can be customized if the order is large.
• 200 supporting points under granting, to ensure drainage and withstand pressure.
TAR residue is a by product material from producing of Bisphenol A ,
Tar Residue
Tar residue is a by-product material from producing of Bisphenol-A ,
with following details:
1. Physical appearance: shiny black solid pieces on solidification.
2. Nature: highly brittle and softens at about 110 deg centigrade.
3. Average Density: 1200 kg/m3 (molten state)
4. Average molecular weight: 261
5. Composition: contains mainly heavy molecular weight products, Bisphenol-A content being about 1 wt% average. The detail average composition is as follows:
• Phenol : 2.9922 wt%
• PRF : 0.0356 wt%
• TMC : 0.6244 wt%
• TMI : 3.1845 wt%
• M210 : 0.1111 wt%
• M198 : 0.2278 wt%
• o,p-BPA : 1.4102 wt%
• codimer : 42.1097 wt%
• p,p-BPA : 1.4102 wt%
• Cyclodimer : 29.7875 wt%
• Rest being : Unknown Compounds
Product Description
Redispersible polymer powder produced by spray-drying special water-based emulsion, mostly based on vinyl acetate-ethylene (VAE), and then obtained a free flowing organic polymer powder. It can re-disperse in water, and form a film after water evaporation by coalescence of individual polymer particles. The film acts as an organic binder, to glue together different substrates, reinforce mortar structure and provide excellent adhesion at cement or gypsum based dry mixed mortar substrate interface.
Technical specification
Appearance: White powder or Fine particles, Free-flowing
Solid content: 98.5%
Bulk Density: 300-500
Viscosity of 50% water solution(Pa.s): 8-12
Minimum film forming temperature: 0
Ash content(1000): 10
Average particle size(um): 80-120
PH value: 6-8
Glass transition temperature(Tg): 0
1.Standard packing is 25kg paper bags inner with PE bag
2.Bluk bags 400kgs/bags,500kgs/ bags
3.Follow customers requests
Chemical name:
Caustic soda/sodium hydroxide
Molecular formula: naoh
Cas no.: 1310-73-2
Molecular weight: 40.00
Description:
White solid or flakes with strong corrosiveness, soluble in water, ethyl alcohol, glycerin, insoluble in acetone . Presenting alkaline solution and heat liberation, presenting deliquescence when exposed to air.
Specification:
Item index index
Appearance flake/solid pearls
Naoh%y 96 99 99
Na2co3%¨¹ 1.0 0.4 0.4
Nacl%¨¹ 0.6 0.1 0.05
Fe3o3¨¹ 0.01 0.01 0.01
Usage:
Sodium hydroxide (synonymous with caustic soda) is one of the basic chemical materials in national economy, and widely used in detergent, petroleum drilling, oil-refining, paper-making, glass-making, textile, printing & dyeing, metallurgy, synthetic fiber, pesticide, petrochemical, pharmacy, food and power industries.
In plastics woven bags, net weight 25kg, 200 kgs iron drum.
145583 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Kasner siding is a new kind of the lightweight and high quality building decorative materials. They become worldwide popular so quickly due to the characteristic of its time-saving, low cost, beauty and weatherability. It is not only for external wall decoration of various constructions such as residence complex, superior villas, scenic spots
Architectures and office buildings, but also suitable for refurbishment of old buildings.
1.Camp k modular houses with middle-size are the most economical ones for accommodation, office, temporary storage. The layout is flexible with span from 5m-18mand length of 1.82m(1k=1.82m) as standard expansion module.
2.The stable frame-share wall structure of house is worked by unique structure system, superior wind resistance, cold-formed thin-walled steel structure, cross layout, flexible cable, lateral wall panel arrangement.
3.The house is one of the fasted installation temporary houses. Four people can install 80m2 each day. A 40ft container can ship about 200 square meters(construction area). This transport volume is economical.
4.This house is one of the best dismantling performance temporary house. It can disassemble 10 times. Building technology: one layer, two layers and three layers .
1.T modular house is most economical temporary house for living and working. General standard is width 5m, length 1.15m, or 0.9m which is flexible in design.
2.It is installed quickly, usually 4 workers can assemble 130 square meter one day. While 330 sqm can be loaded in the 40ft container.
It can endure dismounting for many times up to 10. The roof is designed with water insulation structure and without tack hole.
Product Introduction:
Energy is an important material basis for human survival and development, since entering the 21st century, energy conservation and emission reduction has become the common goal of the development of countries around the world, insulation materials have been a large number of development and application. 1050 degree high temperature resistant calcium silicate board with low thermal conductivity, light weight, high strength, high temperature resistance and other excellent properties, become one of the most promising thermal insulation materials. Calcium silicate board is mainly made of silicon powder, calcium powder, natural wood pulp by high temperature and high pressure steam curing made of low, medium and high density new environmental protection insulation material.
Product features:
Calcium silicate board has good fire resistance, high temperature resistance, waterproof, light weight, easy to cut and other properties. Applicable to steel, petrochemical, ceramics, glass, cement, external wall insulation and all kinds of furnace insulation, as well as electric power, machinery, electronics, shipbuilding and other industries of insulation. Calcium silicate is a common substitute for asbestos and is a safe insulating material. Calcium silicate is one of the most widely used fire-resistant materials in Europe. Europeans are more inclined to use calcium silicate as cladding. When smelting metal ores, silica reacts with calcium carbonate to form this substance, forming slag.
Product use:
Metallurgical industry: heating furnace, holding furnace, annealing furnace, high temperature flue, hot air pipeline.
The 1000â?? high temperature calcium silicate insulation board is composed of hard calcium silicate carbohydrate and reinforced fiber, does not contain asbestos, the highest heat resistance temperature of 1050, is an efficient energy-saving product. With high heat resistance temperature, strong heat insulation performance, low volume weight, high strength, good durability, corrosion resistance, cutting, sawing and other excellent construction characteristics, can be widely used in kiln energy saving and heat preservation projects. Applicable to steel, petrochemical, ceramics, glass, cement, external wall insulation and all kinds of furnace insulation, and electric power, machinery, electronics, shipbuilding and other industries of thermal insulation. Calcium silicate is a common alternative to asbestos as a safe insulation material. Calcium silicate is one of the most widely used materials for fire prevention in Europe. Europeans are more inclined to use calcium silicate as cladding. In smelting metal ores, silica reacts with calcium carbonate to form this substance to form slag.
1050 degree high temperature resistant calcium silicate board has:
1. Good durability, can withstand the continuous heat load within the high temperature limit.
2. Low thermal conductivity and high adiabatic performance throughout the use range.
3. Light weight, high specific strength.
4. Good durability, long-term use without powder phenomenon.
5. Strong construction applicability, with ordinary woodworking tools can be cut products at will.
6. Safe and hygienic use. Free of asbestos, sulfur, chlorine and other toxic substances.
7. Not afraid of wet water, product performance unchanged after drying.
8. Protect high temperature equipment and extend the service life of equipment
The Vineyard Trellis, Line post (EURO STANDARD AND ECONOM STARDARD), ZINC COATING (Z275).
WINE TRAINING STAKE
The best quality and the best price. minimum order 40ft container. FCA Tbilisi, Georgia
From
Ancient Mariners N Cowboys Corporation
( A Management Corporation)
We are dealing in
1.All kind of raw materials
2.All kind of heavy metals
3.All kind of construction materials
4.All kind of scraps and metals
5.All kind of automotive
6.All kind of oil n gas
7.All kind of marine industry equipments spare parts and pipeline projects
8.All kind of real estate
Ready-Mixed Mortar for Various Construction Purposes
Our Ready-Mixed Mortar Factory can supply large quantities of ready-mixed mortars for different construction purposes. They are:
Masonry mortar
Plastering mortar
Special thin layer masonry mortar
Special thin layer plastering mortar
Flooring mortar
Polymer crack-resistant waterproof mortar
Thermal insulation mortar
Soundproof mortar
Door and window joint filling mortar
ALC panel bonding mortar
Ceramic tile adhesive
If you have interest in any of the above ready-mixed mortars, please feel free to contact us with your specific requirements including packing and possible order quantity, etc., and we will provide all the necessary details.
Advantages of ready-mixed mortar:
Ready mixed mortars offer top quality construction with low cost.
Ready-mixed mortars solve the problem that the proportion of mortar prepared by traditional mixing is difficult to control and thus influences the construction quality. The measurement of ready-mixed mortar is very accurate and the quality is reliable. Because mortar with different purposes has different requirements for shrinkage, crack, heat preservation and moisture, etc., and the workability, water retention and setting time of construction requirements are also different, these specific requirements need to be formulated strictly according to scientific formulas, and only the production process of ready-mixed mortar can meet these requirements.
Because of the accurate measurement and quality assurance, the engineering quality after using ready-mixed mortar is obviously improved, the construction period is obviously shortened, and the amount of labor, reduced.
Ready-mixed mortar is a factory-ready-mixed material, which can be used only by adding water and stirring it evenly at the construction site, with little dust escape and more environmental protection. Excellent construction quality will greatly increase the confidence of contractors and owners. The leakage of waterproof mortar layer traditionally mixed on site is also a prominent problem that puzzles owners, but many special waterproof materials in ready-mixed mortar will fundamentally solve such problems.
Our ready-mixed mortar factory has been trying to develop new products and one of them is the ready-mixed heatproof mortar. Here are the product details.
1. Basic information
Specification and color: 20kg/bag; white powder
Compliance standard: Q/DGJC 12-2018 "Flat Roofing Mortar for Buildings"(China National Standard)
2. Product features
Heat insulation and waterproof, anti-cracking and anti-alkali, fire and flame retardant, green and environmental protection.
3. Scope of application
It is applicable to:
---the protection and heat insulation of substrates such as waterproof layer of buildings and cement mortar for flat roofs.
---the protection of house waterproof layer and liquid coil waterproof layer.
---substrates such as cement mortar, cement-based or asphalt-based waterproof coating
It is not applicable to:
---substrates such as colored steel tiles, glazed tiles, ceramic tiles, etc.
---sloping roofs.
4. Product Overview
Ready-mixed heatproof mortar is a new type of inorganic material pre-mixed and dry-mixed with selected lightweight aggregates, inorganic cementitious materials, additives, ect.
It has excellent thermal insulation performance, aging resistance and fireproof performance, and is easy to use.
Just add water, stir and start the on-site construction work.
The product is one of the components of the roof waterproof system, which is used for thermal insulation protection of flat roof, with good thermal insulation effect and waterproof layer protection effect. It can also be used for the protection and thermal insulation of other substrates such as cement mortar flat roofs.
Brand name : ORBOFIX
Origin : Made in Turkey
Payment : TT, LC %30 in front at purchase, %70 before loading
Whole Sale Price
Minimum Order Quantity : 3000
