High Plasticity New Plasticizer Used for Plastic Flooring
Plasticizer B02
Description
Processed from food grade palm oil, B02 is eco-friendly plasticizer passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations.
a.Good color and low Pt-Co, suitable for various of PVC products manufacture, specially used in colorless and transparent PVC products.
b.Good compatibility with PVC raw materials, replace 30% main plasticizer and more percentage could be achieved with main plasticizer DBP, DIBP.
c.Normally used in winter due to the low freezing point.
d.Good thermal stability, suit able for different PVC products manufacturers.
e.Good plasticity, w orks better with main plasticizer such as DOP, DBP, DOTP, etc..
f.Cost effective, i
t
would be first choice on plasticizer for PVC products manufacturers on condition that ensure products quality.
Usage
widely used in PVC processing industry, special for plastic flooring, synthetic leathers, flex banner, etc..
Applications
1.Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations.
2.Low Pt-Co, suitable for light color or colorless products.
3.High flash point(>200ºC),satisfy processing requirements.
4.Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality.
5.DOTP is main plasticizer in exported PVC floor, A03 could replace more than 50%.
6.Our product could be used in both base layer and medium layer of PVC floor.
Packaging & Delivery
Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum
Delivery Lead Time : within 10-20 days after receiving the deposit
Supply Ability : 20,000 ton/year
PREPARATIONS
The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease,
without laitance and loose particles.
Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water.
MIXING
Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water
based on the condition of stirring and keep stirring around 5 minutes until grouting well.
APPLICATIONS
Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the
stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to
escape. Suggest to blend the grout by auto-mixer for better application.
COVERAGE
25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid
Grouting Mortar.
ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
DESCRIPTION
Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed.
ADVANTAGES
* Easy and ready to use, by water addition only.
* Fast working
* Practical and high adhesive power
* Floor would be flat/ level in a second
APPLICATION
CA-010 is used as a floor screed material surface that canâ??t be exposed and should be
covered with floor material, such as: ceramic, granite, carpet, parquet and other
materials.
Various types of �ooring | Heavy construction equipment | Electrical lightings and �ttings Painting and wall decors | Bathroom and sanitary items | Tiles and Parquets Steel drums | HDPE pipes | Steel and Iron
PFC series hydraulic impact crusher has 45 degree feed chute with replaceable liners. The main frame can be opened by hydraulic device. Thick blow bars with locking tongue set into a replaceable backing bar seat. All curtain liners are interchangeable. Positive rotor lock to ensure the safety of persons who change the rotor. With the strengthening and toughening bear and replaceable backing bar seat, this crusher can be applied to the waste recycling materials processing. Final products are in a good product shape,the low proportion of conifer-like.
Main Features
1). High reduction ratio and crushing efficiency;
2). No-board connection; The blow bar with high chrome (high chromed blow bar).
3). Impact plate with a special shape.
4). Crushed product with cubical shape.
5). Easy maintenance and reliable operation.
6). Discharge sizes can be adjusted.
-
145583 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Quick details of lsaw
Out diameter 325-1420mm (14â?³ -60â?³)
Production process Jcoe
Wall thickness 8-40mm
Length 3-13m
Standards Api 5l, astm a672, astm a53, sy/t5768 -2006, gb/t3091 -2008, gb/t9711 -1
Steel grades Q235, q345, l245, l290, a53, s235, s275, s355, gr.B/x42/x46/x56, a672 b60 cl22
Tpi Sgs, bv, moody, ccic can be arranged before shipment.
Packing In bulk due to big sizes
Surface treatment Anti-rust black painting, anti-corrosion treatment (fbe, 3pe, 2pe)
Tpi ( third party inspection) Sgs, bv, moody, ccic
Applications Liquid shipping like oil, water and fuel, building and constructions, chemical vegetation, power station, as well as foreign drill system.
Description
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.
Feature
Resistant to UV, exposed sunlight and chemicals
When applied, it forms as seamless membrane without joints
Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius
Use Area
Roof terraces balconies and verandas
Industrial floor coatings
Stadium, car parks
Stones, marble and ce ramic surfaces
Coverage
Consumption of each layer: 0.1-0.15 kg/m2
Minimum two coats should be applied
Total consumption: approx. 0.2-0.3 kg/m2
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if
this time is exceeded
DESCRIPTION
a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling.
After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications.
ADVANTAGE
* Light, good workability and sanding properties.
* No cracks and hair cracks. (depends on background)
* Smooth surface, solid and no powdery.
* Can be painted or finished with wallpaper directly after dry in minimum 24 hours
* without using PVA putty to leveling up & filling uneven rough surface.
PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler : Limestone
3. Color : GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage : 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness
average 7.5m2/25Kg for 2-3mm thickness
6. Thickness : 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life : approx. 60 minutes
SURFACE PREPARATION
* The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
* Porous and absorbent substrates must be pre-wetted prior to application of Starcoat
CN finish coat.
DESCRIPTION
STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains
selected filler and additive used for smooth finishing to uneven wall cement based plaster
and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks,
smooth, no dust on the surface and ready to be painted with water based paint.
Easy to use, good workability and have a long pot life and correction time even at the
outdoor applications.
USES IN APPLICATIONS
*Cement Based Wall Plaster.
*Precast Concrete.
*Concrete Profile & Concrete Ceilings
*Internal & External.
ADVANTAGE
*Light, good workability and sanding properties.
*No cracks and hair cracks. (depends on background)
*Smooth surface, solid and no powdery.
*Can be painted or finished with wallpaper directly after dry in minimum 24 hours without
using PVA putty to leveling up & filling uneven rough surface.
PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler: Limestone
3. Color: GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage: 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness
6. Thickness: 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life: approx. 60 minutes
SURFACE PREPARATION
1. The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.
DESCRIPTION
AS-600 is a high-solid, solvent-based polyurea coating. Itâ??s also formulated with pure aliphatic resin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within one day.
CHARATERISTIC
* Fast drying and fast curing
* Brushable
* Abrasion and mechanical stress resistant
* Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etc)
APPLICATION AREAS
* Warehouse ramps, garages, terraces, parking areas
* Outdoor and indoor stores, industrial shop floors
* Outdoor laundries, gas station, etc..
Introduction: Non-asbestos fiber cement piping is an environmentally-friendly piping material free of harmful asbestos, produced from harmless fiber and high-grade cement through the use of leading and complicated technology, and is extensively used for projects such as water drainage, disposal of plant sewage, exhaust, flue and cable protective piping. The piping material can be customized according to customers'different demands for diameter, wall thickness and length and ordered according to users' demands.
The expanded metal plaster mesh is also a reinforcing material that we can often find in interior decoration, which is formed by cutting and stretching, so that it without bends or welds, and it is basically no loss in the production process so that cost savings.
In addition, the ribbed surface makes it has the max adhesion, so it can be used in many different kinds of surface, such as concrete, brick, wood, or even plaster ceilings, but it must be fixed with nails to ensure the plastering easier.
The expanded metal plaster mesh is also a reinforcing material that we can often find in interior decoration, which is formed by cutting and stretching, so that it without bends or welds, and it is basically no loss in the production process so that cost savings.
In addition, the ribbed surface makes it has the max adhesion, so it can be used in many different kinds of surface, such as concrete, brick, wood, or even plaster ceilings, but it must be fixed with nails to ensure the plastering easier.
Rock wool is a high quality thermal insulation material with low thermal conductivity. Suitable for medium and large diameter pipes; medium and small storage tanks; curved surfaces with small radius of curvature or surface irregularities. Rock wool is made of basalt,After being melted, adopted four-roller centrifugal cotton process to throw the high-temperature basalt-cotton into a 4-7 μm non-continuous fiber.
Our rock wool PH value between 7-9, soluble chloride ion content is low, in addition to the non-corrosive steel structure and metal structure, the main features are as follows:
Thermal insulation: The thermal conductivity of rockwool at normal temperature (around 25°C) is usually between 0.03 and 0.047W/.
Non-combustion : The combustion performance of rock wool products depends on the amount of flammable binders. Rock wool is an inorganic mineral fiber, non-flammable.
Sound insulation: rock wool products have excellent sound insulation and sound absorption properties. The mechanism of sound absorption is that this product has a porous structure. When sound waves pass through, friction is generated due to the effect of flow resistance, and part of the sound energy is absorbed by the fibers. Impede the transmission of sound waves.
Can be cut according to the security, less security, easy construction
Tanks, such as gas and liquid storage, play an important role in every major area of industry. In order to preserve the material and ensure the stability and safety of the production process, it is important to maintain the temperature inside the tank. If the internal temperature of the oil tank is too high, not only the volatile loss of the oil will increase, but also the environmental pollution will be accelerated, and if the temperature is too low, the objects in the tank will become viscous so that the fluidity of the oil will decrease and the oil tank is outdoor for a long time, so when selecting the insulation material, it must have two functions: low thermal conductivity and waterproof performance
Rock wool has been tested without asbestos, CFC, HFC, HCFC, and other environmentally harmful substances. It will not be corroded or produce mildew and bacteria. It has excellent performance for the insulation of oil tanks.
As a thermal insulation material, rock wool can increase the thermal insulation resistance of the tank walls, reduce the heat transfer coefficient, and reduce the cold/heat transfer through the wall by 70%. This reduces energy loss and saves energy costs.
Rock wool is a high quality thermal insulation material with low thermal conductivity. Suitable for medium and large diameter pipes; medium and small storage tanks; curved surfaces with small radius of curvature or surface irregularities. Rock wool is made of basalt,After being melted, adopted four-roller centrifugal cotton process to throw the high-temperature basalt-cotton into a 4-7 μm non-continuous fiber.
Our rock wool PH value between 7-9, soluble chloride ion content is low, in addition to the non-corrosive steel structure and metal structure, the main features are as follows:
Thermal insulation: The thermal conductivity of rockwool at normal temperature (around 25°C) is usually between 0.03 and 0.047W/.
Non-combustion : The combustion performance of rock wool products depends on the amount of flammable binders. Rock wool is an inorganic mineral fiber, non-flammable.
Sound insulation: rock wool products have excellent sound insulation and sound absorption properties. The mechanism of sound absorption is that this product has a porous structure. When sound waves pass through, friction is generated due to the effect of flow resistance, and part of the sound energy is absorbed by the fibers. Impede the transmission of sound waves.
Can be cut according to the security, less security, easy construction
Tanks, such as gas and liquid storage, play an important role in every major area of industry. In order to preserve the material and ensure the stability and safety of the production process, it is important to maintain the temperature inside the tank. If the internal temperature of the oil tank is too high, not only the volatile loss of the oil will increase, but also the environmental pollution will be accelerated, and if the temperature is too low, the objects in the tank will become viscous so that the fluidity of the oil will decrease and the oil tank is outdoor for a long time, so when selecting the insulation material, it must have two functions: low thermal conductivity and waterproof performance
Rock wool has been tested without asbestos, CFC, HFC, HCFC, and other environmentally harmful substances. It will not be corroded or produce mildew and bacteria. It has excellent performance for the insulation of oil tanks.
As a thermal insulation material, rock wool can increase the thermal insulation resistance of the tank walls, reduce the heat transfer coefficient, and reduce the cold/heat transfer through the wall by 70%. This reduces energy loss and saves energy costs.
Foam Glass ASTM Standard
Description
Cellular glass is a new inorganic thermal insulating material with a structure of equally closed cells. The composition is glass, added with foaming agent. It ?s foamed by high temperature in foaming oven, and then cooled down in cooling oven. It well reserves the chemical stability of inorganic glass. As a result, it has the following features: low density, low thermal conductivity, vapor impermeability, no water absorption, non-combustibility, protection from mould and rat eating, high mechanical strength but easy to cut and able to bear all kinds of chemical erosions except the hydrofluoric acid.
Advantages
1.Wide working temperature range from low temperature to high temperature;
2.Low thermal conductivity and high compressive strength;
3.Water proof,humid resistant,air tightness;
4.Low thermal expansion,good dimension stability;
5.Not combustible,aging resistant,corrosion resistant;
6.Non-toxic,healthy and environmentally friendly;
7.Bacteria resistant;
Chemical Resistance
Dehe foamglass slab is silica-based and is therefore not designed for hydrofluoric envirenments.
Application
Foam glass (cellular glass) is applied widely as follows:
1.Chemical Industry Reaction equipment, chemical pipes, oil pipes, LNG pipes, LPG pipes, tank bottoms and insulation projects, etc.
2.Architecture: refrigeratory, ship-building industry, roof heat-preservation, inside and outside wall heat-preservation, parking lot and insulation of inner layer of chimney, etc.
3.Underground Projects: subways, underground storerooms and tunnels, etc.
4.Others: Military industries, pumice, air-separator pipes, cold liquid tank bottom insulation, etc."
Standard Packing
DEHE foamglass slab can be provide cardboard box form.Volume and numbers are specific to foamglass slab type.
Storage
Store in a cool,dry,frost-free place.Normal storage conditions in up to 25 ? should provide indefinite shelf life.The foamglass slab is extremely friable and should not have any weight stacked on top of it.Do not double stack pallets or any other materials on top of it.Take extreme care during handing.
Product size
Normal foamglass slab sizes are:
length: 600mm
width: 460mm
Thickness: 200mm
Low Density Closed Cell Foam Glass
Product feature:
1. Support device: advanced shaft structure, has automatic temperature measurement and electrical heating device, meanwhile you can choose liquidity support.
2. Catch wheel: mechanical wheel and hydraulic pressure
3. Gearing: single driver or double driver. Control the revolution by yzd, dc motor and frequency variable motor. Be reliable, energy-saving, and efficient.
4. Cylinder tyre bolster: bolster has three types: fixed type, adjustable type and floating type. The structure is simple, maintenance and replacement are convenient without hurting the cylinder.
5. Sealing equipment: there are many different design of sealing style for choice according to kiln models, including air cylinder edge sealing, spring edge sealing, graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And airproof performance is well.
6. Kiln head hood: including stationary type and movable type.
The successful industry application of environment-friendly, energy-saving active limestone with vertical preheated and vertical cooler breaks traditional pattern of lime production, due to reduction of fuel consumption significantly and reducing exhaust emissions, coupled with the adoption of pulse-packs dust-catcher purify exhaust, not only makes production cost and the energy consumption greatly reduced, but also the calcinations process of emission slandered, environmental condition is kept substantially.
