100% Virgin or Recycled Plastic Slat for Goetry Farm. Size Can be any size but ready to ship available size of 500x600mm and 500x500 mm Colors will be any color, ready to ship color is Dark Blue.
Self adhesive bitumen flashing tape is a self-adhesive, aluminum /hdpe film surfaced bitumen backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates. Self adhesive bitumen flashing tape is a self-adhesive, aluminum surfaced bitumen backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates. It is recommended for all substrate sealing repairs on asphalt, bituminous sheets, glass, metal, plastics, timber, mortar, concrete, bricks, roof tiles, stone. Seal guttering, downpipes, roof sheets or flashings. Seal cracked brickwork, concrete, titles or glass. Seal carport or verandah roof to main wall. Seal window frames, chimney, etc Technical information An aluminum foil/ hdpe film carrier A self adhesive rubber modified compound and A silicone coated release interleave( removed during application) Thickness: 1.0mm, 1.2mm, 1.5mm Available in rolls: 50mm x3m, 75mm x 3m, 50mm x 10m, 100mm x 10m, 150mmx10m, 225mm x 10m Special sizes made to order
Malthoid is a 2 ply felt material impregnated with bitumen which is also covered in a fine sand to prevent sticking when rolled. Malthoid is used for waterproofing of flat roofs and under corrugated iron water tanks, to prevent condensation corrosion. Usage: For prevention of rising moisture up through walls of brickwork etc., 90mm x 20mm roll 110mm x 20m roll 150mm x 20m roll 230mm x 20m roll 300 mm x 20m roll 1m x 20m roll 1m x 10m roll Special sizes made to order
A damp proof course ( dpc ) is a physical barrier inserted into the fabric of a building to stop water passing from one place to another. This can be on a horizontal plane, stopping water rising up from the ground by being sucked up by the dry masonry above, or vertically to stop water passing from the outside of a building, though the masonry, to the inside. Dpc's have taken many forms through the ages and one of the earliest forms was to use a layer of slate in the construction. Slate is still used but the less expensive plastic version ( below right ) is now more widely used. Technical specification of dpc Water vapour permeability 0.28 gm2 day-1 Bs3177 Water vapour transmission 733 mnsg-1 Water absorption 0.22% Bs2782 : 430a Resistance to leakage at joints Pass Moat 27 : 5.2.1 Tensile strength of joint Unaged : 300 n Heat aged : 290 n Water soak : 257 n Moat 27 : 5.2.2/3/4 Cold flex temperature −60¡ãc Bs2782 : 320a Tensile strength L : 12.9 nmm-2 T : 11.2 nmm-2 Bs2782 : 320a Elongation at break L : 415% T : 582% Bs2782 : 320a Tear strength L : 122 nmm-1 T : 96 nmm-1 Bba method Low temperature flexibility L :
Coun 2.00.25dtex Tenacit 11.5cn/dtex Elongation 7.5% Molulus 0.1-0.4% 28020 cn/dtex Hot water solubility(90 Packing p.P. Bag, 180kg net 12.96t / 20fcl container
Density¡êo2790-3070 kg/m3 Compressive strengtho1000-3000 kg/cm2 Modulus of elasticityo1.3-1.5x106 kg/cm3 Water absorptiono0.13 % Shore hardnesso> hs 70 Specific gravityo2.6 Wooden packaged, as customer demands
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
EPS blocks can be uses are different sizes to produce flotting object or marking in the sheet and fabricated and decoration for building eco frendly statue and many more. EPS blocks can be uses are different sizes to produce flotting object or marking in the sheet and fabricated and decoration for building eco frendly statue and many more.
18''- 22 base-square groove 1. For casement window 2. Made in ss 304, ss 201 3. Square groove, two- pivots pointed, straight arm or curve- surfaced arm 4. Biggest open angle 90 5. After 50, 000 times opening tests 6. Specification: 4 arms, length 18 base width 22mm, arm thickness 3.0mm. 100 pieces per box, export cardboard packing
Plastic lumber looks and feels like premium wood for outdoor landscape use Extensive applications: Plastic building materials: deck, flooring, handrails, lattice, plank road, wall board, dock, railing, fencing, wall panels, siding board materials. Garden facilities: garden chairs, garden fence, pergola, pavilion, flower shelf, artificial wood flower pot. Outdoor leisure furniture: chair, beer table, park bench, street furniture, bulletin board, garbage bin, Wall panel, tub step, tub panel for bathroom, diy tiles.
Plastic lumber looks and feels like premium wood for outdoor landscape use Extensive applications: Plastic building materials: deck, flooring, handrails, lattice, plank road, wall board, dock, railing, fencing, wall panels, siding board materials. Garden facilities: garden chairs, garden fence, pergola, pavilion, flower shelf, artificial wood flower pot. Outdoor leisure furniture: chair, beer table, park bench, street furniture, bulletin board, garbage bin, Wall panel, tub step, tub panel for bathroom, diy tiles.
20''- 22 base-square groove 1. For casement window 2. Made in ss 304, ss 201 3. Square groove, two- pivots pointed, straight arm or curvesurfaced arm 4. Biggest open angle 65 5. After 50, 000 times opening tests 6. Specification:5arms, length 20 base width 22mm, arm thickness 3.0mm. 100 pieces per box, export cardboard packing
20''- 22 base-square groove 1. For awning window 2. Made in ss 304, ss 201 3. Square groove, two- pivots pointed, straight arm or curve-surfaced arm 4. Biggest open angle 30 5. After 50, 000 times opening tests 6. Specification: 6 arms, length 20 , base width 22mm, arm thickness 3.0mm 100 pieces per box, export cardboard packing
26''- 22 base-square groove 1.For awning window 2. Made in ss 304, ss 201 3. Square groove, two-pivots pointed, straight arm or curve-surfaced arm 4. Biggest open angle 25 5. After 50, 000 times opening tests 6. Specification: 7 arms, length 26 , base width 22mm, arm thickness 3.0mm 100 pieces per box. Export cardboard packing
20''-20 base- round groove 1. For awning window 2. Made in ss 304, ss 201 3. Roundgroove, one- pivot pointed, straight arm or curve-surfaced arm 4. Biggest open angle 25 5. After 50, 000 times opening tests 6. Specification: 6 arms, length 20, base width 20mm, arm thickness 3.0mm 100 pieces per box, export cardboard packing
Description Aluminum tile, also called corrugated aluminum, is one of the most popular construction material.To a certain extent it could replace stainless steel because its property of lightness and anti-corrosion. Specification: MaterialAlloy aluminum TypeSeries 1 series 9 TemperAll temper Thickness0.1mm 2.0mm Surface treatmentSpray coating/roll coating ColorNaturall/gold¡ Characteristic & advantages Very light and easy to assemble Inexpensive and cost saving Good property of antirust Good effect of heat insulation & sound insulation Moist-proof, fire-proof & dust proof Usage: The roof and wall of workshop or warehouse Temporary house, simply building, dormitory Cleansing house & office Packing Protective film, wood pallet, standard export pacakage Protective film, wood pallet, standard export pacakage
- produced by advanced technology and equipment using high-purity gypsum as the raw material, auko regular gypsum board bears flat surface, accurate dimensions and assured quality. - the imported high-quality covering paper has high strength and good adhesive property with plaster core, thus guaranteeing the strength of plasterboard and laying a firm foundation for applying plaster putty or direct decoration. - light weight and high strength, strong nail-pull resistance, good flatness, low water content, low expansion rate, good durability, favorable processability and easy cutting. - tapered edge offers easiness for jointing and the surface of joint is smooth and not easy to crack. - it can adjust indoor humidity to a certain extent and has passed green building material certification for its healthy and environmental property. Packing in containers
Moisture resistance gypsum board, covered with green paper, is moisture resistant lightweight plasterboard. It can be directly used in indoor environment with a relative humidity of over 95%, such as partition and ceiling in washroom, kitchen, basement, it can also be used as base board for applying ceramic tiles, metal sheets, plastic sheets, etc.(it can also be used as lining board of ceramic tiles, metal sheets, plastic sheets, etc.). Standard carton(can add bubble and hard paper for protect products)
The regular paper-faced gypsum board : Technology parameter Main physical propertiesMain thickness specifications mm Standard requirements (gb/t9775-1999) Fracture load(n)Vertical9.5 360 12.0 500 Lateral9.5 140 12.0 180 Weight per unit area(kg/©o) 9.5 9.5 12.0 12.0 9.5120024007.0 1002882.01 12120024009.0 80230.42.08 9.5120030007.0 1003602.52 12120030009.0 802882.59. Standard carton(can add bubble and hard paper for protect products)
