Bridge bucket wheel reclaimer could meet the technological requirements of blending reclaiming in steel and other industry, which is suitable for coal, concentrate, ore fines and other bulk materials. The bridge bucket wheel reclaimer has many good advantages such as good blending efficiency, large reclaiming capacity, high production efficiency. According to the structural style, quantity of bucket wheel, and direction of reclaiming materials, there are bridge twin-bucket wheel bidirection reclaimer, bridge twin-bucket wheel unidirection reclaimer, bridge single-bucket wheel bidirection reclaimer, and bridge single-bucket wheel unidirection reclaimer. The bridge twin bucket wheel reclaimer is mainly used for blending monohydrallite. There is an example for reference. The main parameters and operating modes are as follows: track gauge: 32m(axle base:8m ) production capacity: 100ï½?650t/h pile height: 10m pile width: 26-28m pile length: 330.6m power supply: 380V(50Hz) control source: 220V(50Hz) power supply mode: cable drum maximum wheel load: 280KN operating mode: manual operation, single action, PLC. Our company could provide customized production.
Z-shaped purlin is good in bending resistance, straightness, and it can cut, punch automatically,it is very easy and convenient to use.It can be used as bearing structure in big and medium sized building, such as factories, warehouses, garages, hangars, gyms, exhibitions, theater and so on. Applied plank stuff Color armor plate Applied slab thickness 1.8mm-3.5mm Line speed 16-18m/min Roll diameter 80mm Dimension 11.5m*1.9m*1.4m Weight 5t Hydraulic station power 4kw Working space and workman for the equipment: 1. Ground-level land 2.5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialppgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven gear transmission 7.Cutting model hydraulic profile cutting 8.Length measurement encoder 9.Control style plc 10.Operation model button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 C-shaped keel can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing MaterialPPGI,GI 2.Processing Thickness(mm)0.5-1.6 mm 3.Material of Rollers 45# steel, with hard chrome coated 4.Diameter of Shaft 40mm 5.Production Speed 0-25m/min 6.Roller Driven Gear Transmission 7.Cutting Model Hydraulic Profile Cutting 8.Length Measurement Encoder 9.Control Style PLC 10.Operation Model Button + Touch Screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Z-shaped purlin is good in bending resistance, straightness, and it can cut, punch Automatically, it is very easy and convenient to use.It can be used as bearing structure in big and Medium sized building, such as factories, warehouses, garages, hangars, gyms, exhibitions, theater And so on. Applied plank stuff Color armor plate Applied slab thickness 1.8mm-3.5mm Line speed 16-18m/min Roll diameter 80mm Dimension 11.5m*1.9m*1.4m Weight 5t Hydraulic station power 4kw Working space and workman for the equipment: 1. Ground level land 2. More than 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
C&z-shaped purlin is good in bending resistance, straightness, and it can cut, punch Automatically, it is very easy and convenient to use. It can be used as bearing structure in big and medium sized building, such as factories, Warehouses, garages, hangars, gyms, exhibitions, theater and so on. Applied plank stuffColor armor plate Applied slab thickness1.8mm-3.5mm Line speed 16-18m/min Roll diameter80mm Dimension11.5m*1.9m*1.4m Weight5t Hydraulic station power4kw Working space and workman for the equipment: 1. Ground-level land 2. Â?¥5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm).5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
This producing line applies galvanized steel sheet, colored armor plate and aluminum plate as the material plate.The products of it are used as the roof tile or wall panel outside of building,to increase the beauty and durability of the roof tile and wall panel.This line has no limit on processing length;you can set several different datas on the computer control cabinet according to customers' need. After pressing the button "Confirm", the machine can produce the panel automatically according to the set data.The molding plate surface smooth and not easy to be marked when it is being stamped.So it is easy to install. The product conforms to National Steel Construction Building Standard.
C-shaped purlin is good in bending resistance, straightness, and it can cut, punch automatically, it is very easy and convenient to use.It can be used as bearing structure in big and medium sized building, such as factories, warehouses, garages, hangars, gyms, exhibitions, theater and so on. Applied plank stuffColor armor plate Applied slab thickness1.8mm-3.5mm Line speed 16-18m/min Roll diameter80mm Dimension11.5m*1.9m*1.4m Weight5t Hydraulic station power4kw Working space and workman for the equipment: 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
This line can be set according to customers" need, length is positioning controlled by computer.It Can be exactly positioned, and shown timed on the touchscreen, as well as automatically count and Revise. This line suitable to process outer side of sandwich panel, materials sheet are colored steel Sheet, aluminium steel sheet, stainless steel sheet and so on. This line adopts advanced technique, which integrates gas, electricity and machinery, and this Line is the special equipment for processing colored steel sandwich panel. Its working speed can Be adjusted by frequency converter, and it can process sandwich panel at one time. The whole line Consists of decoiler, molding core, compound par. Products features: Beading equipment Speed:10m/min Power:2.2kw or according to the profile Diameter of roller:according to the profile Power supply:motor Material of roller’s 40cr quenched and tempered, chrome Roll forming Frame:cantilever structure Speed:10m/min Power:4kw up, 7.5kw down Shaft diameter:50 mm Distance roller head:350mm Rollers: 11 up, 18 down Rock wool delivery device Motor power:2*1.5kw Speed:8m/min The maximum transport width:1200mm Dispensing systems Effective volume:150l Unit motor power:10kw Roll forming machine Length:10mm Width:1200mm Lifting speed:200mm/min Drive motor power:2.2kw*4 Lifting motor power:1.5kw*4 Speed:10 m/min Cutting part Cutting motor power:7.5kw Lateral movement motor power:1.1 kw Traversing speed:150 mm/s Cutting width:1300 mm Cutting error:â±2mm
This line can be set according to customers" need, length is positioning controlled by computer.It Can be exactly positioned, and shown timed on the touchscreen, as well as automatically count and Revise. This line suitable to process outer side of sandwich panel, materials sheet are colored steel Sheet, aluminium steel sheet, stainless steel sheet and so on. This line adopts advanced technique, which integrates gas, electricity and machinery, and this Line is the special equipment for processing colored steel sandwich panel. Its working speed can Be adjusted by frequency converter, and it can process sandwich panel at one time. The whole line Consists of decoiler, molding core, compound par. Products features: Beading equipment Speed:10m/min Power:2.2kw or according to the profile Diameter of roller:according to the profile Power supply:motor Material of roller’s 40cr quenched and tempered, chrome Roll forming Frame:cantilever structure Speed:10m/min Power:4kw up, 7.5kw down Shaft diameter:50 mm Distance roller head:350mm Rollers: 11 up, 18 down Rock wool delivery device Motor power:2*1.5kw Speed:8m/min The maximum transport width:1200mm Dispensing systems Effective volume:150l Unit motor power:10kw Roll forming machine Length:10mm Width:1200mm Lifting speed:200mm/min Drive motor power:2.2kw*4 Lifting motor power:1.5kw*4 Speed:10 m/min Cutting part Cutting motor power:7.5kw Lateral movement motor power:1.1 kw Traversing speed:150 mm/s Cutting width:1300 mm Cutting error:2mm
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
