Squeege:Â 60-65 SHORE
Mesh:Â 120/inch
Tension:� 25 N/cm2
Clean Up:Â Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Sublimation coating with acrylic-polyester nature ( in concentrate form ) for sublimation to wood and plywood.
Other adhesives with 2 or more components, the mixture of they must be used within 4-5 hours. Unlike these, this concentrate does not mix with other components and is ready for use, can be used whenever needed even in small uses. This makes it economical. This is very easy to use it, with paint brush or paint roller .
Sublimation coating with acrylic-polyester nature in paste form (concentrate). The concentrate is ready for use.
For the decoration of different wood materials, such as wood board and plywood, through sublimation
Screen printing coating for sublimation on cotton.
Recommended mesh number: 90 mesh - 110 mesh
Drying with air (ventilated) kiln at 120-140 degrees Celsius (or hair dryer at medium temperature).
The process is sample:
1. Print the coating
2. Dry (recommended ventilated kiln) 120 - 140 degrees Celsius for 2-3 minutes (or hair dryer in medium heat, or room temperature for 24 hours)
3. Sublimation at 180 - 182 degrees Celsius ( 355-360 F ) for 30-40 sec.
Two-component, air drying polyurethane based clear.
Recommended Use :-
This product is recommended Top coat for glossy , uv protection,weather property and also as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system.
Physical Data :-
COLOUR : Clear
FINISH : Smooth & Glossy
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 16 sq.mt / ltr at a DFT of 25 �µ
FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C
DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
New concrete should be cured for at least 1 month prior to paint application. Ensure concrete surface is absolutely dry and free from moisture, oil, laitance, dust and dirt. For old concrete, ensure surface is free from oil, grease, algal & fungal growth and any old coating. Sand Blasting on concrete gives the best performance and should be given first preference out of the available surface preparation methods. If blasting is impracticable, Acid Etching with diluted Hydrochloric Acid followed by fresh water washing to be adopted. Seasoned wooden articles should be scuffed with Emery 220/400 to achieve smooth surface. Please refer our Directive Sheet on Surface Preparation.
Application Data
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : Indefinite
COMPATIBILITY : Can be applied on Epoxy primers and oleo-resinous primer and coated / over coated by two component paints like Epoxy, PU, etc.
AFFIX 1K  PU COATING water proofing  is a single component liquid applied, highly permanent elastomeric polyurethane based coating. It is designed to give long lasting, cold curing, maintenance free and superior waterproofing protection for concrete and steel substrates. It is UV stable coating and specially formulated for external applications.
Description
CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage .
Application
* used in multi-kind materials, such as metal, wood, cement and asphalt.
* Indoor, outdoor paint.
* Line Marking.
Characteristics
Durable hard and tough film.
Excellent adhesion.
Excellent abrasion and corrosion resistance.
Description
CC-610N is a 2k topcoat which cured by non-yellowing isocyanate.
Feature
â?¦ Solvent-free, friendly to human.
â?¦ Compression and impact resistant.
â?¦ Chemical resistant as its special structure.
â?¦ Suitable for critical area (0~80â??).
â?¦ Suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc
Usage
Used as a topcoat on surface of concrete and
metal, bridges and steel structures.
CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage .
* Durable hard and tough film.
* Excellent adhesion.
* Excellent abrasion and corrosion resistance.
* used in multi-kind materials, such as metal, wood, cement and asphalt.
* Indoor, outdoor paint.
* Line Marking.
Description
CC-020 is a new type cement based compound coating with various texture of finishes and shades. By apply with different tools and methods, it can provide either natural or rough texture, depending on the requirements.
Use & Feature
1. Suitable for interior and exterior decorative applications.
2. An economical alternative to textured elastomeric coatings.
3. High water-resistance with handy-usability.
4. The built-in texture helps to disguise rough and irregular surfaces.
5. Can be used as primer with water-diluted CC-020.
It works both ways, smartwatches or traditional watches. It gives you ever lasting shininess. While youâ??re exercising or tracking your personal health, lots of viruses & particles sticks on your watch at sub micro levels and Itâ??s extremely hard to clean It off. But with Kristall Nano Coating. All you ever need Itâ??s just a simple swipe.
Kristall Nano Tablet Coating is your one stop solution if you want to protect your device. After applying the coating, you dont have to worry about scratches, or shattering, or even water. Your screen surface will no longer need regular cleaning as the invisible coatings will create an easy to clean effect meaning that water and debris will no longer stick on the tablet surface.
The windshield of the car needs to be clean at all times for safe driving. With Kristall Windshield Protective Coating, your windshield will no longer need regular cleaning as invisible coatings will create a self-cleaning glass effect, meaning that water and debris will no longer stick on the surface. You may enjoy protection for up to 1 year and not only that, it improves visibility during rain and dust storms. Not forgetting its anti-scratch and UV resistant features.
It works both ways, smartwatches or traditional watches. It gives you ever lasting shininess. While you’re exercising or tracking your personal health, lots of viruses & particles sticks on your watch at sub micro levels and It’s extremely hard to clean It off. But with Kristall Nano Coating. All you ever need It’s just a simple swipe.
Kristall Nano Smartphone Coating is your one stop solution if you want to protect your phone. After applying the coating, you dont have to worry about scratches, or shattering, or even water. Your screen surface will no longer need regular cleaning as the invisible coatings will create an easy to clean effect meaning that water and debris will no longer stick on the smartphones surface.
