Composition
Active ingredients: hydrocarbon polymer, alkyd solution and siloxane in petroleum solvent.
Appearance
Free flowing slightly milky liquid.
Packing
Available in plastic pail of 18 litres, 7 litres.
Storage
Store at normal room temperature away from sources of ignition.
Ensure containers lid are covered lightly after use.
limitations
Rainshield is designed for static weather resistance and may lessen efficiency is subjected to physical abrasion.
Warranty
5 years subject to terms and condition.
White cement paint colors
Waterproof cement paint used for exterior and interior decoration for walls, its main ingredient is white cement, it is available in different shades, it can long lost for 2 to 3years on exterior walls and 3 to 4years on interior walls
25 kg laminated gunny pack/polythean bag (17"x27")
Rust preventive dipping compound
Complete and permanent solution for rust prevention. Also helps in preventing minor damages on the component due to its protective coating.
Resist-a-flame
Water soluble, non-toxic spray-on, brush-on, roll-on fire coating for all substrates - inhibits flame spread and smoke development with an astm e19 & e84 a-rating. Lab tested to 1800+ degrees.
25 & 50 lb bags of granular material to be mixed with hot water @ 4.5 lbs per gallon
Anti corrosive paint
Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates
Colour:
Selected colours
Viscosity:
80 +/- 10 in ford cup b-4
Solids:
45 +/- 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Surface dry 4-6 hr.
Hard dry:
32 -48 hr.
Full curing in:
7-8 days
Flash point :
Above 30 c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/dip/ spray
Thinner:
P-71
Cross cut adhesion:
Passes
Bend test 1/2":
Passes
Resistance to salt spray test:
Passes 150 hr. Test
Surface preparation mild steel surface:
Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results
For marine application & chemical atmosphere
Polycoat -rop 801 epoxy primer can be used.
Heat resiting paint
Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c
Gives brilliant lustre with excellent weather resisting properties.
Colour:
Aluminum
Solids:
48± 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour.
Flash point:
Above 30° c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/spray
Thinner
P-73
Storage life:
6 month
Surface preparation:
Mild steel surface
Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest.
Precaution:
Not to be used in areas of high acidity or alkalinity
Does not cure and remains soft until temperature reaches 200°c
At the time of application metal must be at room temperature
Avoid applying thick coat since that may cause blistering.
Uses:
In industry for painting chimney stocks, exhaust sustems
Copal varnish is made from wood rosin(biroza) & finds its application in industries like paint, polishes
Basically used for giving a shining look on wood, glass, ceramic surfaces.
Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline"
Specially developed for modern powder coatings.
Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures)
The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc.
Call us and we will be happy to advise you
