The windshield of the car needs to be clean at all times for safe driving. With Kristall Windshield Protective Coating, your windshield will no longer need regular cleaning as invisible coatings will create a self-cleaning glass effect, meaning that water and debris will no longer stick on the surface. You may enjoy protection for up to 1 year and not only that, it improves visibility during rain and dust storms. Not forgetting its anti-scratch and UV resistant features. Remark: Price is FOB Malaysia only
It works both ways, smartwatches or traditional watches. It gives you ever lasting shininess. While you are exercising or tracking your personal health, lots of viruses and particles sticks on your watch at sub micro levels and It is extremely hard to clean It off. But with Kristall Nano Coating. All you ever need It is just a simple swipe. Remark: Price is FOB Malaysia only.
Kristall anti-static formulated nano-coating is designed for glass surfaces and screens, It provides long-lasting shine solution that is easy and quick to use and will repel tiny particles dirt and other environmental contaminants
A multi-layer, highly durable nano-coating to guard against heavy abrasion and maintain the highest effective gloss level. Our super hydrophobic and UV resistant technology creates a self-cleaning glass effect meaning that water and debris will no longer stick on the surface. For maximum effectiveness, all you have to do is reapply the special coating once every 6 months and you would enjoy protection for 3 years.
Different from Kristall Quartz Car Protective Coating, our premium line makes your vehicles look last even longer. Along with benefits such as high gloss and color rejuvenation, anti scratch, super hydrophobic properties and UV resistance, you will enjoy all these advantages for up to 5 years. Remark: Price is FOB Malaysia only.
Kristall Car Coating Shampoo outperforms traditional water wax in every single aspect. Our secret, a 6.5 Ph balance, preferred by elite car collectors for a clean yet safe result. Our premium automobile coating shampoo gives your vehicle looking shiny by creating an additional layer of nano-coating protection. It has super water repellent properties which reduces deterioration on the vehicle paint surface and enhances brightness and gloss of the surface. These benefits have a durability for up to 3 months. Remark: Price is FOB Malaysia only.
Kristall Top Speed Coat will lock in liquid, bringing out colors and vibrancies that you have never seen on your vehicle before. In detail, this product revitalizes your paint using a super hydrophobic effect which at the same time boosts the surfaces gloss and darkness. This solution has a durability for up to 6 months. Remark: Price is FOB Malaysia only.
Kristall Top Speed Coat will lock in liquid, bringing out colors and vibrancies that you have never seen on your vehicle before. In detail, this product revitalizes your paint using a super hydrophobic effect which at the same time boosts the surfaceâ??s gloss and darkness. This solution has a durability for up to 6 months.
It works both ways, smartwatches or traditional watches. It gives you ever lasting shininess. While you’re exercising or tracking your personal health, lots of viruses & particles sticks on your watch at sub micro levels and It’s extremely hard to clean It off. But with Kristall Nano Coating. All you ever need It’s just a simple swipe.
Roof Kote Elastomeric Water Proof Coating is basically a specially formulated water based elastomeric waterproof paint designed for topcoat waterproofing of terraces, external walls, chajjas etc. It is a heavy duty ready to use waterproofing paint having excellent adhesion to all kind of surfaces. It is also fiber reinforced. It has excellent abrasion resistant properties making it suitable to be evenly applied on China mosaic surfaces. Minimum Order Size and Packgaing details MOQ 15 ton
LUMINX is a high performance non-toxic high emissivity ready to use solar reflective coating which reflects maximum amount of UV and infra-red rays and Keep the house Cool Minimum Order Size and Packgaing details MOQ 15 ton
Material : S/S with coating 2.5mm + S/S lid SS304 0.4mm body+1.7mm aluminum+0.4mm copper Packaging: Color Box MOQ: 1500pcs per each item 7.09 Sauce Pan with Lid: $21.09 7.87 Sauce Pan with Lid: $23.92 7.87 Casserole with Lid: $24.98 9.45 Casserole with Lid: $31.9 9.45 Fry Pan with Lid: $26.49 10.24 Fry Pan with Lid: $28.57
Coatings Optical Filter Optical Window Whenever light passes from one medium into another medium with different optical properties, most notably refractive index, part of the light is reflected and part of the light is transmitted. The intensity ratio of the reflected and refracted components is a function mainly of the difference in refractive index among the materials, the polarization of the incident light and the angle incidence. Whenever light passes from one medium into another medium with different optical properties, most notably refractive index, part of the light is reflected and part of the light is transmitted. The intensity ratio of the reflected and refracted components is a function mainly of the difference in refractive index among the materials, the polarization of the incident light and the angle incidence. As light passes through an uncoated glass substrate, approximately 4% will be reflected at each surface, this result in a total transmission of only 92% of the incident light. Coating each component will increase the throughput of the system and reduce hazards caused by reflections traveling backwards through the system (ghost images). Optical coatings are often used to alter the reflectance, transmittance, absorbance, or polarization properties of optical components. The components being coated are usually called the substrates. The coating layer is deposited in high vacuum using the process of evaporation by either e-beam, or IAD(Ion Assisted Deposition). Coating materials include metal such as Au, Ai, Ag, Cr, etc. And semiconductors such as Si, Ge.
Differences between Spray Paint and Electrostatic Powder Coating: 1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes. 2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns. 3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health. 4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius. 5. The same grade of Powder is cheaper than lacquer. 6. The strength of the powder is better than the ordinary paint. 7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost. Hebei Hanna technology CO., LTD. 's Fast Automatic Powder Color Changing System can change color rapidly for 15 minutes. It saves manpower and time. This is really good for you if you have more color on your workpiece to change. And the Big Cyclone can achieve 99.2% recovery. It's economical and environmentally friendly.
RTV insulator coating are silicone-based paints designed to protect underwater surfaces from fouling and corrosion caused by marine organisms. These coatings are often used in boats, ships, and other marine structures to inhibit the growth of algae, barnacles, and other organisms on underwater surfaces. RTV coated insulators are durable, long-lasting, and resist abrasion and water erosion, making them ideal for harsh saltwater environments. They provide a smooth and glossy finish that reduces drag and improves fuel efficiency in marine vessels.
The series of products are made of saturated carboxylpolyester resin, TGIC or HAA, rutile titanium dioxide ,which are the main raw materials.They have good UV resistance and play a good protection and decorative properties for the application of outdoor metal workpiece surface.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Heat transfer coating for photo or image transfer on wood. Acrylic-polyester nature, ready for use .....
Sublimation coating with acrylic-polyester nature ( in concentrate form ) for sublimation to wood and plywood. Other adhesives with 2 or more components, the mixture of they must be used within 4-5 hours. Unlike these, this concentrate does not mix with other components and is ready for use, can be used whenever needed even in small uses. This makes it economical. This is very easy to use it, with paint brush or paint roller . Sublimation coating with acrylic-polyester nature in paste form (concentrate). The concentrate is ready for use. For the decoration of different wood materials, such as wood board and plywood, through sublimation
Screen printing coating for sublimation on cotton. Recommended mesh number: 90 mesh - 110 mesh Drying with air (ventilated) kiln at 120-140 degrees Celsius (or hair dryer at medium temperature). The process is sample: 1. Print the coating 2. Dry (recommended ventilated kiln) 120 - 140 degrees Celsius for 2-3 minutes (or hair dryer in medium heat, or room temperature for 24 hours) 3. Sublimation at 180 - 182 degrees Celsius ( 355-360 F ) for 30-40 sec.
