Coal is a naturally occurring black deposit of sedimentary rock that is formed in layers called coal beds. The main component of coal is carbon and has varying quantities of hydrogen, sulphur, oxygen and nitrogen with some other elements in minute quantities. Coal is a mined resource and is the largest source of energy for the generation of electricity worldwide. Coal is a valuable source of energy for heavy industry users such as for powering iron ore smelting and minerals processing facilities. With strong relationships with mines in West and Southern Africa regions, Charin Energy brokers supply contracts to users worldwide.
Two grades available: Specification 1: Calorific Value: 6944 Kcal/kg Moisture: 8% Volatile Matter: 38% Ash: 8% Sulphur: 0.85% HGI: 50 Size: 0 to 50 mm Specification 2: Calorific Value: 5555 Kcal/kg Moisture: 18% Volatile Matter: 35% Ash: 10% Sulphur: 1.5% HGI: 38 Size: 0 to 50 mm Seller will provide copies of past analysis report, bill of lading and mining/export licenses subject to receipt of firm request from the Buyer.
Product properties 1high purity - control the consistency of raw material from the mine resource. - introduce automatic whole-process equipment to ensure product consistency. 2 good performance - increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3fine classification - various product category, to provide customized carbon raising scheme 4cost-saving - reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1for 1-5 t furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. Which can make carbon additive fully absorbed. 2for greater than 5 t furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
Ningxia biyuan activated carbon co., ltd. Sells carbon additive for sale anthracite coal for metallurgy carbon additive carbon, which is finished by series production process. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, product features and application range: high fixed carbon content, low sulfur content, stable oil effect, high carbon absorption rate, degree of graphitization the best is to increase the nucleation of molten iron, which is mainly used for smelting cast steel and cast iron. Ningxia biyuan activated carbon co., ltd. Is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Coal tidy is a finely powdered type of coal, which is made by the devastating, crushing, or pounding of coal. As a result of the fragile idea of coal, coal clean can be made amid mining, transportation, or by mechanically taking care of coal.
Metal-refining industry, waste, by-product No detectable crystalline silica Easy cleanup No heavy metals Shiny or dull, dark brown to black, irregular particles Medium performance abrasive Tends to be dusty and shatter on impact Limited use for ultra hi build coating removal used for blasting coated or uncoated metal or concrete surfaces
we are offering high quality Anthracite Coal that is used as a fuel in various industries. Offered coal is processed by making use of advanced techniques in compliance with the defined international industry standards. We test this coal on different parameters of quality to ensure its purity. This Anthracite Coal is extensively used in different industries like chemical, oil, power, thermal & gas, cement, steel, etc. Features: High calorific value Eco-friendliness Optimum purity Long shelf life Anthracite Coal We "Shree Sai Enterprise" is involved in supplying of Metallurgical Grade Anthracite Coal in India.The Anthracite Coal from trusted vendors it has low sulphur and phosphorus contents due to which "Shree Sai Enterprise" has carved a niche for itself as the preferred supply source of coal by leading Ferro Alloys manufactures & Other manufacturers in India. It is generally used in Rolling mills, paper mills and some specific type of foundries to manufacture the different type of products Anthracite Coal finds use as a reductant in Ferro Alloys, Smelters, Steel Plants and Pellet Plants etc. The Low Grade Coal on the other hand, has been successfully used in Cement Kilns, Sponge Iron Plants and Power Plants. It also makes an ideal blend with high volatile matter thermal coal.
Shell Charcoal is an important product obtained from coconut shell. Shell charcoal is used widely as domestic and industrial fuel. It is also used by blacksmiths and goldsmiths and in laundries. Shell Charcoal is also used to produce activated carbon. Currently, the king of natural coals is Coco Nara charcoal, and they're slightly responsible for creating the natural coconut coal movement. Their hookah charcoal is made from 100% recycled coconut husks and burn clean with little to no smell while lighting.
Tons of RB1 and RB3 fresh from the coal mines available for Export, products are ready to be loaded on trucks. The mine is located 40km away from Richards Bay
Indonesian Steam Coal Volume 50,000 - 100,000MT per month on 1 year rolling contracts Option 1 - Supply FOB Mother Vessel assay at the port of loading Option 2 - Supply CIF Destination Safe Port assay at port of discharge RFQ required with specification for reply with Product Offer Any commissions need to be stated with RFQ
We sell coal with the list below: GCV 5800 Total moisture 10% Ash 1.8% Capacity 100,000MT/month Prefer contract 12month. FOB price : 37 USD./MT Origin: indonesia Payment term: T/T or cash for first transaction, the rest month we receive L/C. Shipment start at a month (PO 1month) From the T/T received.
Indonesian Coal: GCV (GAR & NAR) 4200 rejection below 4000 until 7500 rejection below 7300 Minimum Order: 30,000 mt Price: FOB, CFR, and CIF Note: For CFR and CIF Buyer has to issue LOI first, before issuing LOI Seller issues specification of the goods
We hereby represented some Mining Company arround South Kalimantan would like to offer the Steam Coal which has standard specification origin from south Kalimantan which have type of Calorie as shown like this A. Kacal 6400,Kcal 6300,Kcal 5200,Kcal 5000,Kcal 4200,Kcal 4000,Kcal 3800 We confirm that we have all of those Calorie above B. Loading Port : Depend on where we choose the Miner. C.Loading Rate : Average on 7500 MT per day E. Price revised : Every 1 Months F. First Shipment : 45 days G.Payment terms : Cash which use the system like this : - 50% after Signed Contract - 40% after Loading on Board - 10% After Complete the Document G. Type of Order : - Once Stop Buying - Contract at 1 Year H. Validity Offer : Unlimited I. Procedure : 1. Buyer Issue LOI with Specification 2. Seller issue the FCO with the price 3. Buyer signed and returns back the FCO mean that Buyer agreed of all Items inside the FCO. 4. Seller Issue the Draft Contract 5. Buyer and Seller revised exchanged the Draft Contract. 6. Buyer and Seller Signed, exchanged the Document via Fax or emai and conclude 50% of payment. 7. Shipment scheduled adjust the payment terms * purchasing procedure can negotiations Those are above the following statement we provide to make an order . If anyone interested, so let us know your Irrevoc LOI and BCL immediatelly. Thanks for your all kindly attention.
Commodity steam coal Quantity 150 000 - 300 000 metric tons Quality c grade steam coal: specifiactions rejection limit: A. Net calorific value 5500kcal/kg 5300kcal/kg (rejection 5200 kcal/kg) B. Total moisture 10% - 13% C. Calcium oxide in ash (db) 12% max D. Ash content 22 -24% (rejection 24%) E. Sulphur content 0.8% - 1% F. Volatile matter 20 - 25% min (rejection 20%) G. Hardgrove grindability index 40 – 50 H. Size range 0 - 50 mm Delivery fob, richardsbay (rbct) Nature of sale 12 - 24 months contract with an option of rollovers and extensions Price api3 + 1 usd Loading date tbc
Scope Kerosene smoke point tester is based on the standard gb / t382-83 (91) "determination of the smoke point of kerosene" design and manufacture. The maximum height for the determination of the lamp with kerosene and jet fuel smoke point, that the sample in a standard fixture, smokeless flame under specified conditions of, expressed in millimeters. Features 1, kerosene smoke point tester uses millimeter scale background, you can clearly read the data 2, the entire instrument is compact structure, complete 3, kerosene smoke point tester using plug-type structure, more convenient to replace the wick 4, kerosene smoke point tester using a special glass observation window, easy to operate 5, kerosene smoke point tester simple operation, high measurement repeatability Technical parameters 1, the scale: ruler should on the black glass with white flags, their white or black stripes central 2 mm will be divided into bisecting vertical ruler. Ruler measuring range should be 50 mm, 1 mm division. Every 10 mm on the digital standard, with each 5 mm long marking. 2, wick catheter: top wick catheter should be exactly at the same level with the zero on the scale. 3, the lift base: total distance of not less than 10 mm stroke, moves smoothly and evenly. 4, ? reservoir oil: oil reservoir mainly by oil storage body, wick pipes and air ducts, etc., whose critical dimensions conform to gb / t382, oil storage body diameter size ?21.25 ± 0.05, length of 109.0 ± 0.05; wick tube diameter ?4.7 ± 0.05, length of 82.0 ± 0.05; air duct diameter size ?3.5 ± 0.05, length of 90.0 ± 0.05.
A GRADE COAL QUALITY SPECIFICATION: . Total Moisture (a.r.b.) : ±5% . Ash Content (a.d.b.) : ±15,% . Volatile Matter (a.d.b.): ±25,63% . Mixed Carbon (a.d.b.): ±56% . Chlorine :
Coal is a flammable black hard rock used as a solid fossil fuel. It is primarily made up of 65-95% carbon and also contains hydrogen, sulphur, oxygen and nitrogen. It is a metamorphic rock formed from peat, by the pressure of rocks laid down later on top.
Cement, clinker, bauxite, gypsum, fly ash, slag, steel products, kaolin, scrap, pumice stone, silica sand, dolomite, coal, anthracite coal, pet coke, wood pellets.
Antimony ore , iron ore fe 57%, a7 aluminium ingots 99.9%, copper cathode, silica sand 99.7%,.
We provide Bituminous coal from 6135 and above, with low sulfur content, less than 1%. Our products include: Our supply capacity reaches more than 200,000 MT/month, ensuring consistent availability for customers worldwide. We also have experience in fulfilling large orders, including orders of 1 MV with a capacity of more than 40,000 metric tons. Documents and Guarantees: We prioritize transparency and trust in every transaction. Complete documents such as Certificate of Analysis (CoA), Bill of Lading (BL), and other supporting documents are available to ensure smooth business processes.
