Fully Automatic Servo Driven Vial Tray Loading System with Automatic Tray Changeover Machine is use to collect half stoppererd vials in trays. This machine is application when customer wants to handle vials manually for lyophilization process. Half stoppered vials comes from injectable liquid filling machine, it enters conveyor of this machine where vials gets counted according to tray's capacity and are pushed inside tray.
Full Automatic Four Axis Cycle Working Spraying Equipment for Industry As the machine designed by double table structure, its most outstanding function is that it can cycle operation, save time of take and put material, improve production efficiency. With point, line, face, arc, circle, and irregular curve continuous interpolation and four axes linkage, and other functions. Four axis designed Y&D 5400-2Y dispensing robot arm is a newly designed dispensing robot arm with a working range of X/Y/Z axis of 500 300 300 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as Semiconductor packaging, Fixing and protection of PCB electronic Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key, Speaker dispensing, Dispensing seal of battery boxes Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc. Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste, Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc. Main use: The product in the process of bonding, infusion, coating, sealing, filling, Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and Irregular curve and triaxial linkage function is available etc. Specifications Item Y&D5400-2Y X/Y/Z working area (mm): 500/300/300/100 Load worktable: 11.0kg/5.0kg Speed PTP X&Y/Z (mm/sec)0.1~800/500 Repeatability: +/- 0.01mm / axis Resolution: 0.01mm/axis Data memory: 100 programs, 4000 points/program Data storage: CF card/pc Storage & USB Display: Teach pendant LCD Operation system: PTP (point to point) & CP (continuous path) Interpolation linear/circular: 4 axis Teaching method: Teach pendant I/O signals: 8 inputs / 8 outputs External interface: RS232 Power supply: AC 90~260V 320W Operating temperature: 0~40 C Motor system: Micro stepping motor If you have any interest and questions about us and our products, Pls feel free to let me know, I promise to give you the quickest reply as soon as I got it.
PG128 is one of a new series of models launched by our company for small and medium-sized customers. It is a cost-effective automation equipment solution customized for small and medium-sized customers. The system adopts the mode of industrial control computer (built-in control card), motion control system, optical and mechanical positioning comparison system, fast and accurate positioning, and fully automatic completion of the whole process of chip grasping, placing, burning, taking and packaging conversion. It solves the problem of high cost of original personnel, low efficiency and high defect rate, which can be quickly transformed into automatic equipment by manual, and can also meet the market demand of the majority of small, medium and micro customers. The Main Features: 1. Superior performance the system can select Tray, Tape packaging input and Tray, Tape packaging output operation, optional ATMK20 marking machine, so it can provide most kinds of IC burning, marking and packaging integration operation. 2. Intelligent operation automatically take and put IC in order to complete the specified task: take and put material/positioning/burning/dosing/packaging using self-made software directly and programming communication, fast integration of motion and programming control. 3. Efficient programming built-in high-speed intelligent ELNEC/PY burner, the efficiency is much higher than the parallel mass production programmer, providing a high speed, low noise, stable and reliable programming platform. 4. Optional marking mode IC marking or printing is provided for Tray/Tape packaging. (Work with optional printer, can print 1~2 numbers or text combination). 5. Accurate positioning mechanical positioning seat structure or optional CCD positioning. IC positioning should be carried out before placing the SOKET to ensure placement accuracy. 6. Modular burning unit modular design of burning device, 6 sets of burning seat divided into three units, with double nozzle to achieve high efficiency burning; 7. Multi-site programming - up to 4 8 or 618 workstations simultaneously asynchronous programming; Minimize device idle time when burning high density Memory. 8. Minimum changes to machine configuration - universal Pin driven design ensures that the adapter is universal, programming different product types of the same package of IC using the same socket (adapter). 9. Quick replacement of consumable parts, simple maintenance - boot self-test, modular design allows simple maintenance, repair and replacement; Different input and output devices can be changed quickly. Powerful operating software setting parameters and test results are automatically saved, the next boot directly use; Such benefits are for quality control and production tracking; A graphical user interface makes access easier.
Characteristic: This type machine is a kind of laser engraving machine system equipped with Co2 laser tube,it is used to cut  Metal and nonmetal such as acrylic, PVC, rubber sheet, plastic, wood, bamboo,  leather, cloth, double-color board, etc. Performance parameter Working area:130*250cm 150*300cm; Laser power:150W/180W/280/300W; Laser type:CO2 sealed laser tube,water-cooled; Engraving speed:0-6000cm/min; Cutting speed:0-5000cm/min; Power supply:220V/50HZ , 110V/60HZ; Graphic format supported:BMP, PLT, DST, DXF, AI; Software supported:CorelDraw, PhotoShop, AutoCAD,TAJIMA; Driving system:stepper motor; Optional parts:Up-down worktable,Rotary axis; Applicable material:Steel,Acrylic,wood,cloth, fabric etc.
Characteristic: 1.leading Rack Drive, fast, high efficiency, air-speed can reach 35 m / min or more, against the wave plate is carved in manufacturing can be up to 20 m / min above the speed equivalent to the purchase of 4 -- 5 ordinary type machines. 2. intelligent protection work table: Prevention of misoperation or software errors, and so on the surface may cause damage. Intelligent processing of cross-border protection: preventing processing format over the layout design of mechanical collision caused the phenomenon. 3. fully in line with international standards: can use any CAD / ArtCAM software and other relief. 4. advanced DSP control handle, control automatically processing multiple levels 3 D. To carry out rapid, smooth 3D processing, carving or cutting. Offline operation can be realized. 5.the overall program structure welding tempering aging treatment, is not strong deformation. Gantry mobile, fixed working table can be arbitrary processing work table material. 6. suitable for a variety of materials processing large quantities of production.7.Take the water cooling system for marble tool when works for marble ,granite ,stone and so on.
our best quality Slitter Rewinder Machine, Aluminum Foil Slitting Machine, Foil Rewinding Machine, Tape Cutting Machines, Tape Making Machine, Slitting Rewinder Machine, House Foil Rewinder Machine, Masking Tape Rewinding Machine, Slitter Machines, Coating Machine, BOPP Cutting Machine, Rewinder Machine.
our best quality Slitter Rewinder Machine, Aluminum Foil Slitting Machine, Foil Rewinding Machine, Tape Cutting Machines, Tape Making Machine, Slitting Rewinder Machine, House Foil Rewinder Machine, Masking Tape Rewinding Machine, Slitter Machines, Coating Machine, BOPP Cutting Machine, Rewinder Machine
Cold Shot Nitrogen Deburring Machine Introduction Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method. Application O - rings, gaskets and other rubber sealings Insulators and other electric / electronic components Valve stems, washers and fittings Short tubes and flexible boots Rubber absorbers and bumpers for automobile Face masks & goggles Mobile phone housing and intelligent watch strap Zinc and mag alloys like door lockers for auto cars SPECIFICATIONS NS - 120C Size: L1400mm * W1300mm * H2300mm Weight: 1500kg Power Supply: AC380V 50HZ Electrical Capacity: 8KW * 3PH Design Temp: - 130Deg. C Design Pressure: 0.5 - 0.7 Mpa Outer Wall Material: SUS Frame Material: 100% SUS304 Barrel Capacity: 120L Wheel Speed: 6, 000 rpm Max Barrel Speed: 0 - 16rpm Media Throw wheel Size : 350 Operation Mode: Press Button
Electro-hydraulic CNC Press Brake is in an overall welding and overall processing structure, and the main parts of machine are all analyzed by ANSYS finite element analysis software, which has ensured the reliability of machine and the precision of entire machine. The CNC control system adopts , ESA, or Swiss CYBELEC products, which can achieve the functions of graphic programming for bending angle, compensation for angle amendment, automatic calculation also adjustment of bending pressure, automatic calculation of compensation for workbench distortion, extending length of workpieces, bending pressure for bottom bending, open distance, and automatic withdrawal of rear stopper, etc. Standard configuration: 1. 4+1 axis (Y1, Y2, X, R +V axis) 2. CNC system: DELEM DA-53T 3. Hydraulic system: German Rexroth (Italy DUPLOMATIC) 4. Grating ruler: GIVI optical scale 5. Ball screw: 6. Linear guide rail: 7. Main electrical components: Schneider 8. Compensation method: mechanical compensation
Dear Buyer/Importir, This laser, which is a professional manufacture specialize in fiber laser, CO2 laser cutting machine since 2004. will attend a lot of exhibitions this year, we are very glad to introduce you to buy the exhibition machines EXHIBITION MACHIEN WILL ENJOY: FREE SHIPPING + FREE INSTALLTION AND TRAINING Here are the time details, if you have interest, please kindly Fiber Laser Machine/CO2 Laser Machine/Laser Welding Machine/Laser Marking Machine/Laser Cleaning Machine Fiber Laser Machine/CO2 Laser Machine/Laser Welding Machine/Laser Marking Machine/Laser Cleaning Machine
The BASE is sturdy machined casting fitted with Leveling Screws a carries fixed collimator arm and a swinging Telescope arm. TELESCOPE & COLLIMATOR tubes are carried in sturdy machined pillars, which arc accurately adjusted to make the Axis of the telescope a collimator pass through the axis of the instrument. The axis can be adjusted with the help of an adjusting pin. ADJUSTMENTS to the collimator, telescope tubes are provided for setting their optical axis at right angles to the vertical axis of the spectrometer. Both the Telescope Collimator tubes are fitted with smooth rack a pinion adjustment. The SLIT of the collimator is from brass and the slit jaws are finished and ground with the utmost care and optically tested for accuracy of the edges. The two jaws are operated by the knurled ring and move symmetrically from the center and remain parallel at all openings. A sliding Shutter is provided to increase or decrease the length of the slit. PRISM TABLE with grating holder is provided with three leveling screws and is engraved with concentric lines to facilitate the correct location of the prism. It may be raised or lowered & rotated independently of the Verniers.
CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys Micro Machining or Not: Micro Machining Surface treatment: Customer's Request Service: Customized OEM CNC Machining Application: Industrial Equipment, Automation, Aerospace, Medical Equipment: 3/4/5 Axis Center Machining Drawing Format: 2D/ (PDF/CAD) 3D (IGES/STEP) Size: Customer's Drawings Tolerance: 0.01- +/-0.005mm Lead time: 14-21days Supply Ability: 800000 Piece/Pieces per Month
CNC SPECIFICINPUT OUTPUT INTERFACE MODULES PASSIVE CUM RELAY WITH 24 I/P & 16 O/P RELAY WITH FUSE OPTIONAL SUITABLE FOR FANUC / SIEMENS I/O MODULE OR FEILD OF FIELD DEVICES
Home furnishings, and sanitary ware.Sourcing and supplying high quality pharmaceutical products, home furnishings, sanitary ware, auto parts, solar items, and electrical components, ensuring seamless transactions and customer satisfaction
Machine spare parts.
Traub Machine Levers And Spares.
Professional Tube Fiber Laser Cutting Machine
TXT-FS-3015 Fiber Laser cutting machine integrates high power fiber laser, optical, mechanical and electrical in one system which adopts latest laser technology, CNC control technology and high-performance laser power system to process all kinds of metal sheets cutting with high speed and efficiency. The cutting range for the Laser Cutting Machine is 3000mm 1500mm. It has high speed and its products have smooth edge, small kerf width and little heat effect. This kind of machine is especially suitable for thin sheet metal cutting.
The 3D Dynamic CO2 Laser Marking Machine is controlled by the computer, can mark on the surface of processing materials along the desired track through 10.64um laser beam s beam expanding, focus, galvanometer s deflection to achieve the engraving effect.
It can realized automatic edition and correction of characters, signs, graphs, images, bar codes, two-dimensional codes, automatically increased serial numbers. It can support various file formats like PLT, PCX, DXP, BMP, JPG, and so on. It may use TIF fonts directly. 24-hour non-stop running makes it meet the demand of massive on-line and off-line industrialized production.
