Plastic pipette fills the fragile defect of glass tube and ends the history of glass tubes and rubber plug for the transfer of high-risk contagiousness liquids. The interior of the pipette is smooth and reduces the damage to the tissue structure and cell in the liquid. It can transfer the liquid sample safely, rapidly and quantitatively. It is resistant to low temperature and can be sterilized at high temperature.
Hdpe pipe performance and features: 1. Environmental material. Hdpe is a kind of no-toxic, tasteless and unharmful chemical material, and hdpe pipe, inherits those typical features nicely. 2. Good flexibility. When it is used in dredging pipe, the rubber flexible connectors can be saved because of its good flexibility. 3. Low hydraulic resistance. The smooth inner wall make the water transportation capacity improve more than 30% under the same condition. 4. No leakage. The technics of hot-fusion and electric-fusion make sure the the strength of welding point is stronger than the body pipe itself. 5. High abrasion performance. Its wear resistance is 4 times as the steel pipe. 6. Anti-corrosion and crack growth resistance. 7. Long lifetime durable in use. 50 years at least. 8. Economy Low delivery, installation and maintenance cost. Model: dn16mm-dn1200mm Material: pe80, pe100 Press level: 0.4mpa-1.6mpa Color: black, with blue strip Executive standard: iso4427 en12201 astmf714 as4130 gb/t13663 Length: 4m, 6m and 12m, or as your request
PP pipe have a long service life, it can be used for 50 years under the certain temperature and the same pressure. Excellent anti-corrosive performance, it have resistance to chemical corrosion and can tolerate over a wide range of PH range between 1-14 under high concentration of acid and alkali corrosion. Excellent anti-wear ,when conveying the ore and the mud it has a higher anti-wear performance than the steel. Good sanitation performance ,it just has Carbon, hydrogen, oxygen,it is healthy. Has high stiffness, it has glass fiber in it thus the pipe is hard to have deformation. Heat resistance, heat preservation and energy conservation, the highest temperature it can tolerate is 115 degree centigrade and it’s coefficient of thermal conductivity it is the 1/20 of the steel pipe, so it has a good heat preservation performance. Reliable connection performance, the stiffness of the hot melt interface is higher than the pipe body, the seam wont break because the move of the soil. Easy to construct, it is light and the welding process is sample easy to construct and it cost a little. The usage of our PP pipe The PPH pipe mainly used on chemical industry to conveying the acid and alkali liquid
Characteristics: Free from weakness caused by rusting weathering and chemical actions; Healthy water no secondary pollution; Little resistance of liquidhigh efficiency of transmission; Excellent mechanic performance; Light weight convenient for installation and maintenance; Reliable property; High endurance of pressure good property of sealing Applications: Can be used for drinking water supplyunderground pipeline for agriculture acids and slurries transportation drainage system sewerage system rain water sub-soil drainage ventilation and so on.
Features & Application: 1. High corrosion resistance, long service life (50 years in normal use conditions) 2. PE has excellent chemical stability, good flexibility 3. Light weight, transport, easy to install and transport, lower maintenance costs 4. Nontoxic, no Leakage,higher flow capacity; 5. Recycled and Environment-friendly 6. Applied to agricultural irrigation, construction site, drainage and pump.etc.
Characteristics: Free from weakness caused by rusting, weathering and chemical actions Healthy water, no secondary pollution Little resistance of liquid,high efficiency of transmission Excellent mechanic performance Light weight, convenient for installation and maintenance Reliable property High endurance of pressure, good property of sealing Applications: Can be used for drinking water supply,underground pipeline for agriculture, acids and slurries transportation, drainage system, sewerage system, rain, water, sub-soil drainage, ventilation and so on.
Nickel alloy welded tube, nickel alloy seamless tube, nickel alloy bar, nickel alloy tube, nickel alloy strip, nickel alloy wire, stainless steel.
Characteristics: Free from weakness caused by rusting, weathering and chemical actions; Healthy water, no secondary pollution Little resistance of liquid,high efficiency of transmission Excellent mechanic performance Light weight, convenient for installation and maintenance Reliable property High endurance of pressure, good property of sealing Applications: Can be used for drinking water supply,underground pipeline for agriculture, acids and slurries transportation, drainage system, sewerage system, rain, water, sub-soil drainage, ventilation and so on.
PE Coil Pipe (0.4-0.6MPa)
Coupling 45 elbow 90 elbow Tee Reducing tee Flange Field thread Nipple Reducer .
Alumina based catalyst carrier and gamma alumina microspheres.
ductile iron universal coupling Wide Range Coupling for PVC Pipe coupling for ductile iron Pipe Ductile iron wide range Flexible Joint for pipe Ductile cast iron universal flexible coupling wide range ductile cast iron ranger coupling Wide Range Flexible Joint Universal Flexible Coupling Blue Color Ductile Iron Flexible Universal Dresser Coupling ISO2531EN545/598 Universal Joint Coupling Flexible Coupling Wide Range Universal Flexible Coupling materail specification: body ductile iron GGG50 center sleeve carbon steel S235JR end ring ductile iron GGG50 rubber seal rubber EPDM bolt galvanized steel ISO898-1:1999 washer galvanized steel nut galvanized steel ISO898-2:1992 cap plastic
Pipe OD: 50-315 Design Standard: BS EN12842 â?¢ Material conform to EN-GJS500-7. â?¢Working Pressure: PN10.PN16 â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2 â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682 â?¢ WRAS approved FBE coating and Rubber also available on request. * High Tolerance Mechanical Pipe Fittings.
Size: DN50 to DN300. â?¢ Design Standard: BS EN12842 â?¢ Material conform to EN-GJS500-7. â?¢Working Pressure: PN10.PN16 â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2 â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682 â?¢ WRAS approved FBE coating and Rubber also available on request. * High Tolerance Mechanical Pipe Fittings.
PPH is from PP pipe, PPH pipe is made of PP tube through beta modification,Make its beta with uniform fine crystal structure. PPH pipe have a long service life, it can be used for 50 years under the certain temperature and the same pressure. Excellent anti-corrosive performance, it have resistance to chemical corrosion and can tolerate over a wide range of PH range between 1-14 under high concentration of acid and alkali corrosion. Has high stiffness, it has glass fiber in it thus the pipe is hard to have deformation. Heat resistance, heat preservation and energy conservation, the highest temperature it can tolerate is 115 degree centigrade and it's coefficient of thermal conductivity it is the 1/20 of the steel pipe, so it has a good heat preservation performance. Reliable connection performance, the stiffness of the hot melt interface is higher than the pipe body, the seam wont break because the move of the soil Easy to construct, it is light and the welding process is sample easy to construct and it cost a little. It can conveying the chemical and The pharmaceutical wasted water and drinking water.It can also used on agricultural to conveying the Irrigation water and conveying the heat and cold water.
Inconel alloy, incoloy alloy, hastelloy alloy, monel alloy, nickel alloy, austenitic stainless steel.
Kaolin, clay, molecular sieve, nickel catalyst.
Steel pipe.
Size:DN40-DN600 â?¢ Design Standard: BS EN14525 â?¢ Material conform to EN-GJS500-7. â?¢Working Pressure: PN10.PN16 â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2 â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682 â?¢ WRAS approved FBE coating and Rubber also available on request. * High Tolerance Mechanical Pipe Fittings. * Angular deflection +/- 3°.
Single Sphere Rubber Expansion Joint Features: -Allow for 4 way movements -Precision molded of synthetic rubber&nylon -Excellent ability to absorb vibration and sound -Perfect corrosion resistant -Using floating flange,easy to install Rubber Expansion Joint EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 End Flange:DIN2501, BS EN1092, BS4504PN16,JIS10K,ANSIB16.5 Flange
