Soda ash light and soda ash dense are both available.
74%, 77%, 94% calcium chloride is in stock, we will provide you a competitive price.
Product Description Polyaluminium chloride(PAC) is a new highly efficient inorganic polymer coagulant,the product is made by hydrochloric acid or aluminum-containing hydrochloric acid, calcium aluminum power witn advanced technology, good flocculation effect ,low price and excellent.Its water purification is better than the traditional aluminum sulfate and ferric ordinary inorganic coagulant,and soild product is used spray drying technology, product is light yellow,yellow or brown powder. 2. Product Advantages: 1). Flocculation ability, high adsorption activity, floc formation and deposition of fast 2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation 3).Easily to use and good effective 3.PAC-Poly Aluminium Chloride Details Name: PAC CAS No.: 1327-41-9 Other Names: Poly Aluminium Chloride 30% Place of Origin: Tianjin, China Molecular Formula: [Al2(OH)nCl6-n]m Grade Standard: Industrial Grade Appearance: Yellow Application: Water Treatment 4. Packing & Shipping Plastic woven bag,n.w.25kg/bag or according to the customer's order.
Product Description Nylon Raw Material Fr V0 Gf 30% Gf35% Granules PA6 / PA11 / PA612 / PA610 / PA46 / PA6T / PA9T / PA12 / PA66 For Automotive 1,Good wear resistance, excellent self-lubricating good heat resistance and chemical medicine resistance good oil resistance, high mechanical strength, good mechanical properties at low temperature good self-extinguishing property. well machine shaping. but high water absorption. high contracted percentage. not good dimension stability 2,Improve water absorption, dimension stability. heat resistance and freeze resistancebe base on the excellent intrinsic property, it has higher impact strength than pure nylon 3,Good mechanical property. good electrical property, good dimension Stability, good arc resistance, good dyeing property, less toxicity property, good heat resistance, not yield corrosion gas, non-volatilization, non-precipitation and permanent effect of flame retarded 1,Electrical and electronic industry: connector, timer, reel, cover circuit breaker, transmission wheel, cable rack, etc 2.Automobile industry: intake manifold, engine cover, engine decoration cover, cylinder head cover, oil filter, wiper, radiator grille, fuel pipe, etc 3.Sports equipment: bicycle cushion, wheel hub and wheel, bicycle handle and zero accessories, skate accessories, etc
Teflon(PTFE) cutting film and cutting board products are subjected to single-sided or double-sided surface treatment to make it tacky and can be coated with ordinary adhesives. The chemical etching treatment changes the surface finish by altering the polymers properties, making them very suitable for bonding with most adhesives, such as epoxy resins, polyurethanes, etc. Ptfe Sheet With One Side Etched, Ptfe Products, Ptfe Rings
We design and provide various of products in high performance fluoropolymer materia. We specialize in providing solutions to all clients by manufacturing finished products as per customerâ??s drawings, samples or requirements.
Hiwell offers a wide range of sizes of high quality extruded,molded PTFE tubes and PTFE flexible tube. The materials are available in virgin PTFE, modified PTFE and PTFE compound materials. Up to diameter 213mm we can supply standard extruded lengths of 500mm,1000mm, 2000mm, 3000mm and 4000mm. Larger diameters up to approx 1323mm will be molded. Maximum length depends on the diameter and ranges from 100mm to 300mm. Other sizes are available upon request.
Hiwell offers a wide range of sizes of high quality extruded and molded PTFE rods. Our molded rods are available in virgin PTFE, modified PTFE and PTFE compound materials. The high quality PTFE rods are commonly used in machined components. Virgin PTFE 100% vingin PTFE material,excellent thermal, chemical, and electrical resistant properties. Modified PTFE PTFE modified to exhibit superior physical properties. PTFE Compounds PTFE blended with specific additives to suit specific applications.
Hiwell can offer Skived sheet/film, molded sheet, also have one side & two sides PTFE etched sheet/film. The PTFE sheet in semi-finished form on standard rolls,plate or converted into finish punched components in custom shapes ready for immediate assembly in to your device. Applications include laminate release sheets, wire and cable wrap, and industrial gasket. One side etched (or two side) etched PTFE sheet/film is recommended for applications where bonding of teflon film is required.
Thickness: 0.5-10mm, Length: 1500mm, 3000mm, 4500mm It is used as sealing material for various kinds of flanges.It can be used in chemical industry,food industry,pharmacy industry,semiconductor industry,aerospace industry,petrochemical industry,paper industry,shipbuilding industry and medical equipments.
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
Alumina Grinding Ball Usage:Wet grinding Al2O3(%):92 Hardness(Mohs):9 Grinding media is characterized by: Higher density; Higher hardness; Higher wear resistance; Higher grinding efficiency. SPECIFICATION Application Area Used in high speed stirred grinding mills; Ball mills as abrasive media for ceramic raw materials; Glaze materials in ceramic factories, cement factories, enamel factories; Used in glass work,owing to the excellence of high density, high hardness, and high wear rate. During the abrasive/grinding processing, ceramic balls will not break up,they will not pollute the grinded material as well; The mix and crush procedure of ceramics, glass, glaze and frits, chemical and plastic industries. Method of application: Used in wet grinding method: A. Final Assembly of ball in ball mills a total volume of 55%. Empirical formula: M=3.14*R2*D*L*25%/1000 (Note: M= charged alumina ball quantity number of added alumina balls D= alumina ball density(g/cm3) D= alumina ball density (g/cm3) density of alumina ball R= radius of ball mill RADIUS r = radius of ball mill ball mill L= length of ball mill Length l = length of ball mill ball mill) For a new installation of ball mill, loading specifications and dimensions of the ball depends on the size and weight of the ball mill. B. Increase volume of ball = Initial amount of ball*Wear rate*Grinding time Used in dry grinding methods: Dry grinding is widely used in mining, ceramics, powders and other industries. Wear of grinding media for split industry pollution of raw materials, we developed the dry grinding ball of low toughness, wear, solves the grinding media of widespread pollution problems of raw materials. Dry grinding with grinding ball ratio depends on the raw material of hardness and the grinding of rough, usually by isostatic molding grinding balls.
Alumina grinding ball: Usage:wet grinding Al2o3(%):92 Hardness(mohs):9 Features: Higher density; Higher hardness; Higher wear resistance; Higher grinding efficiency. Application area: Used in high speed stirred grinding mills; Ball mills as abrasive media for ceramic raw materials; Glaze materials in ceramic factories, cement factories, enamel factories; Used in glass work, owing to the excellence of high density, high hardness, and high wear rate. During the abrasive/grinding processing, ceramic balls will not break up, they will not pollute the grinded material as well; The mix and crush procedure of ceramics, glass, glaze and frits, chemical and plastic industries. Method of application: Used in wet grinding method: A. Final assembly of ball in ball mills a total volume of 55%. Empirical formula: m=3.14*r2*d*l*25%/1000 (note: m= charged alumina ball quantity number of added alumina balls D= alumina ball density(g/cm3) D= alumina ball density (g/cm3) density of alumina ball R= radius of ball mill Radius r = radius of ball mill ball mill L= length of ball mill Length l = length of ball mill ball mill) For a new installation of ball mill, loading specifications and dimensions of the ball depends on the size and weight of the ball mill. B. Increase volume of ball = initial amount of ball*wear rate*grinding time Used in dry grinding methods: Dry grinding is widely used in mining, ceramics, powders and other industries. Wear of grinding media for split industry pollution of raw materials, we developed the dry grinding ball of low toughness, wear, solves the grinding media of widespread pollution problems of raw materials. Dry grinding with grinding ball ratio depends on the raw material of hardness and the grinding of rough, usually by isostatic molding grinding balls.
1>.Ceramic rubber liner description: Ceramic rubber liner is compounded by rubber sheet, flat or spherical ceramic tiles and Steel plate through hot vulcanizing process.It is fixed to equipment surface by means of bolts Connection. There are two types of ceramic surface:flat and spherical.Ceramic rubber liner is High wearable, high cut-resistant, and super impact-resistant. 2>.Features of ceramic rubber liner: High wear and cut resistance High impact resistance 3>.Technical parameters of ceramic rubber liner: 3.1.Aluminum oxide content of ceramic:92±1%;specific gravity of ceramic :3.6±0.1;hardness of ceramic:>mohs hardness 9;color: white. 3.2.Rubber:nr; peeling strength:=25 mpa 3.3.Steel plate:q235a 3.4.Selection principles:
Product name: ammonium sulphate Molecular formula: (nh4)2so4 Grade standard: industrial grade, caprolactam grade Purity: n above 20.5% Cas no: 7783-20-2 Einecs: 231-984-1 Appearance: white crystalline powder. Packing: 50kg pp bag. Application: used for fertilizer, also for oil and gas industry. Normally used as welding agent, fabric fire-proofing agent.
